• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.151-151
• /
• 2023

An accurate prediction of the hydrodynamic maneuvering darivatives is essential to desing a robust control system of a UUV(unmanned underwater vehicle). Typically, these derivatives were estimated by either the towing tank experiment or semi-empirical methods. With the enhancement of high performance computing capacity, a numerical analysis using computational fluid dynamics has reach the level of experiment. Therefore, the aims of the present research are to numerically develop a computational model for the vertical planar motion mechanism of a UUV and to estimate the hydrodynamics loads in 6-DOF. The target structure of the present study was manta type UUV (12meter length). The numerical model was developed in 1/ 6 model scale. Numerical results were compared with the results of the towing tank experiment for validation. In the present study, a commercial RANS-based viscous solver STARCCM+ (ver 17.06) was used.

• Journal of Technology Innovation
• /
• v.25 no.4
• /
• pp.107-143
• /
• 2017

This study aims to understand the impact of internal and external environments and innovation efforts on a company's performance. First, the relationships and patterns between variables were determined through an exploratory factor analysis. Afterwards, a cluster analysis was conducted, in which the influential factors summarized in the factor analysis were classified. Finally, structural equation modeling was used to carry out an empirical analysis of the structural relationship between innovation efforts and the company's performance in the classified clusters. 7 factors were derived from the exploratory factor analysis of 40 input variables from external and internal environments. 4 clusters (n=1,022) were formed based on the 7 factors. Empirical analysis of the 4 clusters using structural equation modelling showed the following: Only independent technology development had a positive impact on the company's performance for Cluster 1, which is characterized by sensitivity to a technological/competitive environment and innovativeness. Only independent technology development and joint research had positive impacts on the company's performance for Cluster 2, which is characterized by sensitivity to a market environment and internal orientation. Joint research and the mediating variable of government support program utilization had positive impacts, while the introduction of technology had a negative impact on the company's performance for Cluster 3, which is characterized by sensitivity to a competitive environment, innovativeness, and willingness to cooperate with the government and related institutions. Independent technology development as well as the mediating variables of network utilization and government support program utilization had positive impacts on the company's performance for Cluster 4, which is characterized by openness and external cooperation.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.348-357
• /
• 2020

Discussions on entrepreneurship are increasing, but the methodology that can be applied to actual small to mid-sized businesses and venture firms is insufficient, and research on measuring achievement and application is lacking. In this regard, this paper analyzed actual proof on the relationship among entrepreneurial orientation, R&D capabilities, market share, and the creation of BSC future values that can be empirically applied to small to mid-sized businesses and venture firms. A factor analysis and hypothesis verification have been conducted with the SEM model utilizing SmartPLS 3.0 on the recent 7th year (2017) data from the Human Capital Corporate Panel (HCCP) of the Korea Research Institute for Vocational Education and Training. The actual proof analysis revealed that entrepreneurial orientation creates a positive influence on R&D capabilities and the creation of BSC, and also on market share, with R&D capabilities as a parameter. On the other hand, the relationship between entrepreneurial orientation and market share proved to be not statistically meaningful. Future value creation of BSC also could not mediate the relation between entrepreneurial orientation and market share. Therefore, this research has proven that a company must cultivate its personnel's R&D capabilities with their entrepreneurial orientation. Furthermore, it is a significant fact that BSC, the conventional measuring tool for performance management, could not mediate the relationship between entrepreneurial orientation and market share. Future companies aiming at innovation should consider developing a new index that could measure the corporate-level entrepreneurship and conduct performance management.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.4
• /
• pp.101-113
• /
• 2012

The degradation of a tunnel drainage system leads to increases in pore water pressure around the tunnel and the lining stress, which results in affecting the tunnel stability. In the present study of the Namsan 3th tunnel, more than 30 year old tunnel, the effects of the drainage performance reduction due to drain hole clogging on the tunnel lining stability were investigated by examining pore water pressure distribution around the tunnel and the lining stresses through numerical analysis. Groundwater flow modeling on the Mt. Namsan region was done first and 3D seepage and coupled stress-pore water pressure finite element analysis were performed on the tunnel using the results of the groundwater flow modeling. The pore water pressure distribution and the tunnel lining stresses could be predicted using a drain hole outflow data measured in the tunnel site. This analysis method may be used to evaluate the current stability of old tunnels for which in most cases field investigations and related information are not readily available.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.101-111
• /
• 2006

In case of drilled shafts installed by drilling through soft overburden onto a strong rock, the piles can be regarded as end-bearing elements and their working load is determined by the safe working stress on the pile shaft at the point of minimum cross-section or by code of practice requirements. Drilled shafts drilled down for some depth into weak or weathered rocks and terminated within these rocks act partly as friction and partly as end-bearing piles. The base resistance component can contribute significantly to the ultimate capacity of the pile. However, the shaft resistance is typically mobilized at considerably smaller pile movements than that of the base. In addition, the base response can be adversely affected by any debris that is left in the bottom of the socket. The reliability of base response therefore depends on the use of a construction and inspection technique which leaves the socket free of debris. This may be difficult and costly to achieve, particularly in deep sockets, which are often drilled under water or drilling slurry. As a consequence of these factors, shaft resistance generally dominates pile performance at working loads. The efforts to improve the prediction of drilled shaft pile performance are therefore primarily concerned with the complex mechanisms of shaft resistance development. In this study, the numerical analyses are carried out to investigate the behavior characteristics of side of rock socketed drilled shafts varying the loading condition at the pile head. The difference of behavior characteristics of side resistance is also evaluated with the effects of modelling of asperity.

• Journal of Internet of Things and Convergence
• /
• v.10 no.1
• /
• pp.39-45
• /
• 2024

Container volume is a very important factor in accurate evaluation of port performance, and accurate prediction of effective port development and operation strategies is essential. However, it is difficult to improve the accuracy of container volume prediction due to rapid changes in the marine industry. To solve this problem, it is necessary to analyze the impact on port performance using the Internet of Things (IoT) and apply it to improve the competitiveness and efficiency of Busan Port. Therefore, this study aims to develop a prediction model for predicting the future container volume of Busan Port, and through this, focuses on improving port productivity and making improved decision-making by port management agencies. In order to predict port container volume, this study introduced the Extreme Gradient Boosting (XGBoost) technique of a machine learning model. XGBoost stands out of its higher accuracy, faster learning and prediction than other algorithms, preventing overfitting, along with providing Feature Importance. Especially, XGBoost can be used directly for regression predictive modelling, which helps improve the accuracy of the volume prediction model presented in previous studies. Through this, this study can accurately and reliably predict container volume by the proposed method with a 4.3% MAPE (Mean absolute percentage error) value, highlighting its high forecasting accuracy. It is believed that the accuracy of Busan container volume can be increased through the methodology presented in this study.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.3
• /
• pp.37-48
• /
• 2009

The standardization of marketing has been one of the most focused research topics in international marketing. The term "global marketing" was often used to mean an internationally standardized marketing strategy based on similarities between foreign markets. Marketing standardization was discussed only within the context of traditional physical marketplaces. Since then, the digital "marketspace" of the Internet had emerged in the 90's, and it became one of the most important drivers of the globalization process opening new opportunities for the standardization of global marketing activities. On the other hand, the opinion that a greater adoption of the Internet by customers may lead to a higher degree of customization and differentiation of products rather than standardization is also quite popular. Considering this disagreement, it is notable that comprehensive studies which focus upon the marketing standardization especially in the context of global e-commerce are missing to a high degree. On this background, the two basic research questions being addressed in this study are: (1) To what extent do companies standardize their marketing in international e-commerce? (2) Is there an impact of marketing standardization on the performance (or success) of these companies? Following research hypotheses were generated based upon literature review: H 1: Internationally engaged e-commerce firms show a growing readiness for marketing standardization. H 2: Marketing standardization exerts positive effects on the success of companies in international e-commerce. H 3: In international e-commerce, marketing mix standardization exerts a stronger positive effect on the economic as well as the non-economic success of companies than marketing process standardization. H 4: The higher the non-economic success in international e-commerce firms, the higher the economic success. The data for this research were obtained from a questionnaire survey conducted from February to April 2005. The international e-commerce companies of various industries in Germany and all subsidiaries or headquarters of foreign e-commerce companies based in Germany were included in the survey. 118 out of 801 companies responded to the questionnaire. For structural equation modelling (SEM), the Partial-Least. Squares (PLS) approach in the version PLS-Graph 3.0 was applied (Chin 1998a; 2001). All of four research hypotheses were supported by result of data analysis. The results show that companies engaged in international e-commerce standardize in particular brand name, web page design, product positioning, and the product program to a high degree. The companies intend to intensify their efforts for marketing mix standardization in the future. In addition they want to standardize their marketing processes also to a higher degree, especially within the range of information systems, corporate language and online marketing control procedures. In this study, marketing standardization exerts a positive overall impact on company performance in international e-commerce. Standardization of marketing mix exerts a stronger positive impact on the non-economic success than standardization of marketing processes, which in turn contributes slightly stronger to the economic success. Furthermore, our findings give clear support to the assumption that the non-economic success is highly relevant to the economic success of the firm in international e-commerce. The empirical findings indicate that marketing standardization is relevant to the companies' success in international e-commerce. But marketing mix and marketing process standardization contribute to the firms' economic and non-economic success in different ways. The findings indicate that companies do standardize numerous elements of their marketing mix on the Internet. This practice is in part contrary to the popular concept of a "differentiated standardization" which argues that some elements of the marketing mix should be adapted locally and others should be standardized internationally. Furthermore, the findings suggest that the overall standardization of marketing -rather than the standardization of one particular marketing mix element - is what brings about a positive overall impact on success.

• Agribusiness and Information Management
• /
• v.8 no.1
• /
• pp.17-26
• /
• 2016

India is largest producer of banana in the world producing 29.72 million tonnes from an area of 0.803 million ha with a productivity of 35.7 MT ha-1 and accounted for 15.48 and 27.01 per cent of the world's area and production respectively (www.nhb.gov.in). In India, Tamil Nadu leads other states both in terms of area and production followed by Maharashtra, Gujarat and Andhra Pradesh. In Rayalaseema region of Andhra Pradesh, Kurnool district had special reputation in the cultivation of banana in an area of 5765 hectares with an annual production of 2.01 lakh tonnes in the year 2012-13 and hence, it was purposively chosen for the study. On $23^{rd}$ November 2003, the Government of Andhra Pradesh has commenced a comprehensive project called 'Andhra Pradesh Micro Irrigation Project (APMIP)', first of its kind in the world so as to promote water use efficiency. APMIP is offering 100 per cent of subsidy in case of SC, ST and 90 per cent in case of other categories of farmers up to 5.0 acres of land. In case of acreage between 5-10 acres, 70 per cent subsidy and acreage above 10, 50 per cent of subsidy is given to the farmer beneficiaries. The sampling frame consists of Kurnool district, two mandals, four villages and 180 sample farmers comprising of 60 farmers each from Marginal (<1ha), Small (1-2ha) and Other (>2ha) categories. A well structured pre-tested schedule was employed to collect the requisite information pertaining to the performance of drip irrigation among the sample farmers and Data Envelopment Analysis (DEA) model was employed to analyze the performance of drip irrigation in banana farms. The performance of drip irrigation was assessed based on the parameters like: Land Development Works (LDW), Fertigation costs (FC), Volume of water supplied (VWS), Annual maintenance costs of drip irrigation (AMC), Economic Status of the farmer (ES), Crop Productivity (CP) etc. The first four parameters are considered as inputs and last two as outputs for DEA modelling purposes. The findings revealed that, the number of farms operating at CRS are more in number in other farms (46.66%) followed by marginal (45%) and small farms (28.33%). Similarly, regarding the number of farmers operating at VRS, the other farms are again more in number with 61.66 per cent followed by marginal (53.33%) and small farms (35%). With reference to scale efficiency, marginal farms dominate the scenario with 57 per cent followed by others (55%) and small farms (50%). At pooled level, 26.11 per cent of the farms are being operated at CRS with an average technical efficiency score of 0.6138 i.e., 47 out of 180 farms. Nearly 40 per cent of the farmers at pooled level are being operated at VRS with an average technical efficiency score of 0.7241. As regards to scale efficiency, nearly 52 per cent of the farmers (94 out of 180 farmers) at pooled level, either performed at the optimum scale or were close to the optimum scale (farms having scale efficiency values equal to or more than 0.90). Majority of the farms (39.44%) are operating at IRS and only 29 per cent of the farmers are operating at DRS. This signifies that, more resources should be provided to these farms operating at IRS and the same should be decreased towards the farms operating at DRS. Nearly 32 per cent of the farms are operating at CRS indicating efficient utilization of resources. Log linear regression model was used to analyze the major determinants of input use efficiency in banana farms. The input variables considered under DEA model were again considered as influential factors for the CRS obtained for the three categories of farmers. Volume of water supplied ($X_1$) and fertigation cost ($X_2$) are the major determinants of banana farms across all the farmer categories and even at pooled level. In view of their positive influence on the CRS, it is essential to strengthen modern irrigation infrastructure like drip irrigation and offer more fertilizer subsidies to the farmer to enhance the crop production on cost-effective basis in Kurnool district of Andhra Pradesh, India. This study further suggests that, the present era of Information Technology will help the irrigation management in the context of generating new techniques, extension, adoption and information. It will also guide the farmers in irrigation scheduling and quantifying the irrigation water requirements in accordance with the water availability in a particular season. So, it is high time for the Government of India to pay adequate attention towards the applications of 'Information and Communication Technology (ICT) and its applications in irrigation water management' for facilitating the deployment of Decision Supports Systems (DSSs) at various levels of planning and management of water resources in the country.

• Land and Housing Review
• /
• v.8 no.1
• /
• pp.23-29
• /
• 2017

The BIM design is expected to expand to the domestic and overseas construction industries, depending on the effect of construction productivity and quality improvement. However, with the obligation of Public Procurement Service to design the BIM design, it includes a design error and the problem of utilization of 3D design by choosing a simple 2D to 3D remodelling method that can not be modelled in 3D modeling or use of the construction and maintenance phases. The results reviewed by BIM design results were largely underutilized and were not even performed with the verification of the error. In order to resolve this, one must develop the check system that secures the quality of BIM design and ensure that the reliability of BIM results are available. In this study, it is designed to develop a program that can automatically verify the design of the BIM design results such as violation of the rules of the BIM design, design flaws, and improve the usability of the BIM design. In particular, this programs were developed not only to identify programmes that were not commercially available, but also to validate drawings in low-light computer environments. The developed program(LH-BIM) store the information of attribute extracted from the Revit file(ArchiCAD, IFC file included) in the integrated DB. This provides the ability to freely lookup the features and properties of drawings delivered exclusively by the LH-BIM Program without using the Revit tools. By doing so, it was possible to resolve the difficulties of using traditional commercial programs and to ensure that they operate only with traditional PC performance. Further, the results of the various BIM software can be readily validated, which can be solved the conversion process error of IFC in the case of SMC. Additionally, the developed program has the ability to automatically check the error and design criteria of the drawings, as well as the ability to calculate the area estimation. These functions allow businesses to apply simple and easy tasks to operate tasks of BIM modelling. The developed system(LH-BIM) carried out a verification test by reviewing the review of the BIM Design model of the Korea Land & Housing Corporation. It is hoped that the verification system will not only be able to achieve the Quality of BIM design, but also contribute to the expansion of BIM and future construction BIM.