• Journal of Radiation Protection and Research
• /
• v.15 no.2
• /
• pp.101-112
• /
• 1990

For the performance assessment of the radioactive waste disposal system (repository), a biosphere model is suggested. This biosphere model is intended to calculate the annual doses to man caused by the contaminated river water for eight pathways and four radionuclides. This model can also be applied to assess the radiological effects of contaminated well water. To account for the uncertainties on the model parameter values, parameter distributions are assigned to these model parameters. Then, Monte Carlo simulation method with Latin Hypercube sampling technique is used. Also, sensitivity analysis is performed by using the Spearman rank correlation coefficients. It is found that these methods are a very useful tool to treat uncertainties and sensitivities on the model parameter values and to analyze the biosphere model. A conversion factor is proposed to calculate the annual dose rate to humans arising from a unit radionuclide concentration in river water. This conversion factor allows for the substitution of the biosphere model in a probabilistic performance assessment computer code by one single variable.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.219-224
• /
• 2012

In this work, a steady-state performance modeling and off-design performance analysis of the 2-spool separate jet turbofan engine named BR715-56 which is a power plant for the narrow body commercial aircraft is carried out for engine performance behaviors investigation and condition monitoring using a commercial code MATLAB/SIMULINK. Firstly, the engine component maps of fan, high pressure compressor, high pressure turbine and low pressure turbine are generated from similar component maps using the scaling method, and then the off-design performance simulation model is constructed by the mass flow matching and the work matching between components. The model is developed using SIMULINK, which has advantages of easy steady-stare and dynamic modelling and user friendly interface function. It is found that the off-design performance analysis results using the proposed model are well agreed with the performance analysis results by GASTURB at various operating conditions.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.6
• /
• pp.661-669
• /
• 2018

Engineering system problems consist of multi-objective optimisation and the performance analysis is generally time consuming. To optimise the system concerning its performance, many researchers perform the optimisation using an approximation model. The Response Surface Method (RSM) is usually used to predict the system performance in many research fields, but it shows prediction errors for highly nonlinear problems. To create an appropriate metamodel for marine systems, Lee (2015) compares the prediction accuracy of the approximation model, and multi-objective optimal design framework is proposed based on a confirmed approximation model. The proposed framework is composed of three parts: definition of geometry, generation of approximation model, and optimisation. The major objective of this paper is to confirm the applicability/usability of the proposed optimal design framework and evaluate the prediction accuracy based on sensitivity analysis. We have evaluated the proposed framework applicability in derrick structure optimisation considering its structural performance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.326-330
• /
• 2011

Development and validation of performance analysis model for dual combustion ramjet engines has been performed. A typical performance model for hypersonic intake flow and supersonic mixing and combustion was demonstrated; Taylor-Maccoll equation for coaxial intakes and a quasi-one dimensional reacting flow analysis with CEA chemical equilibrium for supersonic combustion. The results, thermodynamic data of intake and supersonic combustor were validated with CFD numerical results.

• Knowledge Management Research
• /
• v.19 no.4
• /
• pp.39-58
• /
• 2018

This study explores the effects of business consulting on the business performance of firms by using a unique survey for various industry sectors in Korea. We attempt to build a consulting model that shows the structural relationship between consulting factors and consulting performance. Moreover, through the consulting model, we conduct the analysis of elasticity of consulting factors and the group analysis based on firm age. First, the findings show that all consulting factor has a positive impact on the consulting performance, but in the results of factor elasticity, they have a somewhat different impact. Second, while the support of CEOs is relatively more elastic than other consulting factors with respect to the completion of consulting projects, the institutional condition for consulting is relatively more elastic than other factors with respect to the contribution to business performance. Third, since the high-firm age group has a greater capacity to absorb and utilize external knowledge and resource, the consultant competency and institutional conditions have a more impact on the consulting performance than the low-firm age group. On the other hand, in the low-firm age group, the result indicates that the support of CEOs has a more impact in the consulting performance than the high-firm age group. According to the total effect, the support of CEOs in the entire model has the highest impact on the consulting performance. Thus, it is probably difficult to achieve the improvement of business performance through consulting as well as the successful consulting projects without the CEOs' commitment and awareness about the consulting projects.

• Water Engineering Research
• /
• v.5 no.3
• /
• pp.133-146
• /
• 2004

Soil and water assessment tool (SWAT) was simulated based on the default parameters and a priori soil parameter estimation method in Bocheong watershed of Korea. The performance of the model was tested against the measured daily runoff data for 5 years between 1993 and 1997. The sensitivity analysis of SWAT model parameters was conducted to identify the most sensitive model parameters affecting the model output. The results of SWAT simulation indicate that the overall performance of SWAT in calculating daily runoff is reasonably acceptable. However, there is a problem in estimating the low flow components of streamflow since the low flow components simulated by SWAT are significantly different from the measured low flow. The sensitivity analysis with SWAT points out that soil related parameters are the most sensitive parameters affecting surface and ground water balance components and groundwater flow related parameters exhibit negligible sensitivity.

• IE interfaces
• /
• v.24 no.4
• /
• pp.314-322
• /
• 2011

This study analyzes a relationship between Data Envelopment Analysis(DEA) efficiency scores and a normalization index in order to examine the validity of DEA models. A normalization index concerned in this study is 'sales per R&D project fund' which is regarded as a crucial R&D project performance evaluation index in practice. For this correlation analysis, three distinct DEA models are selected such as DEA basic model, DEA/AR-I revised model(i.e. DEA basic model with Acceptance Region Type I constraints) and Super-Efficiency(SE) model. Especially, SE model is adopted where efficient R&D projects(i.e. Decision Making Units, DMU's) with DEA efficiency score of unity from DEA basic model can be further differentiated in ranks. Considering the non-normality and outliers, two rank correlation coefficients such as Spearman's ${\rho}_s$ and Kendall's ${\tau}_B$ are investigated in addition to Pearson's ${\gamma}$. With an up-to-date empirical massive dataset of n = 482 R&D projects associated with R&D Loan Program of Korea Information Communication Promotion Fund in the year of 2011, statistically significant (+) correlations are verified between the normalization index and every model's DEA efficiency scores with all three correlation coefficients. Especially, the congruence verified in this empirical analysis can be a useful reference for enhancing the practitioner's acceptability onto DEA efficiency scores as a real-world R&D project performance evaluation index.

• Journal of Korean Society of Forest Science
• /
• v.84 no.1
• /
• pp.63-70
• /
• 1995

This paper discusses applications of neural network to stand stocking control problems. The scope of this research was to develop a neural network model for finding optimal stand management regimes and examining the performance of the model for field application. Performance was analyzed in consideration of the number of training examples and structural aspects of neural network. Research on network performance was based on extensive optimization studies for pure longleaf pine(Pinus palustris) stands. For experimental purposes. an existing nonlinear even-aged stand optimization model with a whole-stand growth and yield simulator was used to generate data samples required for the performance analysis.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.5
• /
• pp.583-590
• /
• 2022

In this paper, the performance characteristics of the 2 vane pump for wastewater treatment were investigated using response surface method(RSM) with commercial computation fluid dynamics(CFD) software. Design variables of wastewater treatment pump were defined with the meridional plane of the 2 vane pump impeller. The objective functions were defined as the total head and the efficiency at the design flow rate. The hydraulic performance of optimum model was verified by numerical analysis and the reliability of the model was retained by comparison of numerical analysis and comparative analysis with the reference model.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.57
• /
• pp.11-20
• /
• 2000

In dynamic management environment, CEO must make an efficient decision with information & knowledge management systems based on IT(Information Technology). As a key component to cope with this current, we suggest the business performance analysis system based on KDD(Knowledge Discovery in Databases). We consider the theoretical model that is composited both Value-Added in respect of stakeholder and Economic Value-Added in respect of shareholder. Additionally we use DBMS and data mining method using Genetic Algorithms as physical model. To demonstrate the performance of the business performance analysis system, we analyse a domestic motors industry. The empirical case is based on the financial data of KISFAS(Korea Investors Services Financial Analysis System) database. The samples included in the study consist of H motors/S motors industry over the 16-year from 1981 to 1996.