• 한국지반공학회논문집
• /
• 제35권12호
• /
• pp.111-121
• /
• 2019

2019년 개정된 시설물 안전과 유지관리 세부지침을 보면, 기존의 안전성 중심의 시설물 평가에서 내구성과 사용성을 추가한 성능평가로 확대된 바 있다. 이러한 확대는 전 세계적으로 이슈화되고 있는 시설물의 고령화와 시설 이용측면을 반영한 점이기는 하나 실제로 이러한 시설물 평가가 유지관리와 관계된 보수보강과 연계되기 때문에 각 세부성능 간의 상관관계 및 목표 성능의 선정과 연계된 성능보강시 우선순위 결정 등 많은 후속연구가 필요하다. 이 연구에서는 국내 도로시설에 설치된 옹벽을 중심으로 기존의 시설물 평가이력에 대한 분석을 통해 우선적으로 개정된 성능평가에서 적절한 목표 성능을 제시하였다. 또한, 실제 2개의 옹벽에 대해 평가를 수행하고 목표성능의 적절성 여부를 검토하였다. 그리고, 안전성과 내구성만으로 구성된 옹벽의 성능평가에 사용성 부분을 추가할 수 있는 세부 지표를 제시하였다.

• 교육시설 논문지
• /
• 제24권5호
• /
• pp.11-18
• /
• 2017

An university dorm has significant implications in terms of providing residential, living, and learning spaces. With its supportive function, a dorm enables each university to provide higher level of education. The operation & maintenance(O&M) condition of the dorm has a decisive effect on the students' satisfaction. Accordingly, high levels of O&M services should be performed for students. However, Korean dorms are being operated and maintained by their own O&M guidelines without the consideration of spatial characteristics of dorm facilities and the comprehensive and systematic understanding on effective O&M processes. Given the fact that dorm facility can be a crucial factor in determining the entire quality of university and its O&M condition is closely related to the satisfaction of students, it is imperative that we need to pay more attention to the O&M condition and services. Therefore, the main objective of this research is to improve dorm students' satisfaction levels by applying different O&M method, preventive maintenance rather than reactive maintenance which has been performed so far. In ordering for doing it, 'Facility Management(FM) Standard' from KS, 'Facility Performance Indicator(FPI)' from APPA: Leadership in educational facilities and 'Building O&M Inspection Manual' from Korean Ministry of Land, Infrastructure and Transport were analyzed to come up with 15 significant O&M factors. After extracting O&M factors, the survey was conducted to determine importance rate and performance rate of each O&M factor. Using the Important-Performance Analysis(IPA), the priority of 15 O&M factors was established. The result of this research will be helpful for the efficient dorm facility O&M services and for facility managers to appropriately allocate the limited resources and human power.

• 한국유체기계학회 논문집
• /
• 제4권3호
• /
• pp.46-52
• /
• 2001

This paper describes a turbine test program conducted at Seoul National University(SNU). To measure blades' aerodynamic performance, either linear(2-Dimensional) or annular(3-Dimensional) cascades are often used. However, neither cascade can consider effects such as those due to rotation or rotor-stator interaction. Therefore, a rotating test facility for axial turbines has been designed and built at SNU, and its description is given in this paper. The results from an axial turbine performance test are presented. At the design point, the measured efficiency agrees with the efficiency predicted by a meanline analysis. At off design points, however, the measured and predicted efficiencies diverge. The most likely cause is hypothesized to be the inaccuracy of correlations used in the meanline analysis at off design points.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.41-44
• /
• 2007

극초음속으로 비행하는 추진기관이 직면하는 고속 유동 등 제반 현상을 모사하기 위한 지상시험 설비로 충격파 풍동을 설계, 구축한 후 성능 시험을 수행하였다. 개발된 준 일차원 작동 해석를 이용하여 설계점을 파악한 후, 가압식 극고속 시험 구축을 위한 개념 설계를 완료하였다. 이어 단위 해석코드를 이용하여 구체적인 성능 설계 및 각 구성품에 대한 설계를 완료, 구축한 후, 다양한 운용조건에서 성능시험을 수행하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.881-885
• /
• 2018

In order to develop a gas circuit breaker (GCB), the breaking performance of the short line fault (SLF) should be prioritized over that of the breaker terminal fault (BTF). In brief, it is necessary to evaluate the thermal characteristics of the insulating gas that is filled in a GCB. In the process of developing a GCB, many companies use the simplified synthetic testing facility (SSTF).In order to evaluate the SLF breaking performance of a GCB with a long minimum arcing time, a modifications to the conventional SSTF was proposed. In this study, we developed the SSTF with a modified transient recovery voltage circuit. The performance of the newly developed SSTF was verified by an $L_{90}$ breaking performance test on a rating combination of 170 kV, 50 kA, and 60 Hz.

• International Journal of Reliability and Applications
• /
• 제2권4호
• /
• pp.269-280
• /
• 2001

The objective of this paper is to provide a model for effective implementation of costing RAM management in the design and procurement of production facility considering the system cost-performance trade-off. This research proposes a two-step approach of costing RAM design and test of system RAM for production facility. In Step 1, a static model is proposed to find an initial system configuration to meet the required performance based on system RAM and LCC and analyzes the trade-off relationships between various factors of RAM and LCC. In the second Step, we developed time and failure truncated models for system reliability test and analysis. For the computational purpose, we developed computer programs and have shown the sample results. By the sample test run, the proposed model has shown the possibilities to provide a good method to analyze system performance evaluation for both design and operational phase, This model can be applied to a wide variety of systems not only for costing RAM of the production facilities but also for the other kinds of equipment.

• 한국가시화정보학회지
• /
• 제16권3호
• /
• pp.52-58
• /
• 2018

In this study, an experimental facility has been built to measure the cooling performance of a piezoelectric fan. The facility is composed of a heat source made of $50{\mu}m$ Ni-Cr foil, a piezoelectric fan and a rotary fan for cooling the heat source. For two cases where the foil is vertical or horizontal, the surface temperature on the foil has been measured by an IR camera with and without cooling and the cooling performance of both fans has been analyzed. With cooling by both fans, the rotary fan lowers the surface temperature of the foil as a whole, while the piezoelectric fan lowers the surface temperature at the center of the foil locally. It is also found that the cooling effectiveness of the piezoelectric fan is higher on the horizontal foil than on the vertical foil because the natural convection interferes with the jet from the piezoelectric fan.

• 화약ㆍ발파
• /
• 제39권4호
• /
• pp.12-21
• /
• 2021

본 연구에서는 발파진동에 대한 콘크리트 배수관로 보호구의 내진성능을 비교하기 위해 일련의 FEM 수치해석을 수행하였다. 비교 대상은 본 연구에서 제안하는 두 종류의 ㅁ 형태의 보호구와 재래식의 ㄷ 형태의 보호구이다. 해석 과정에서는 폭원 이격거리와 지발당 장약량을 변화시키면서 세 종류의 보호구의 내진 저항을 비교하였다. 그 결과, 본 연구에서 제안하는 두 종류의 보호구가 진동저감 성능의 측면에서 재래식 보호구에 비해 더 우수한 것으로 나타났다.

• 수산경영론집
• /
• 제47권2호
• /
• pp.43-59
• /
• 2016

This study investigated the difference of the effects of public loan programs in fishery industry on management performance from a balanced score card (BSC) perspective depending on the type of loan, scale of fund, period of support and business category, using the financial data of fisheries firms having the balance of loan at the end of 2014. The key factors influencing credit rating change were also analyzed after public loan support. From a integrative perspective, results show that the firms supported by working fund have higher management performance than the firms supported by facility fund. The firms received large scale fund showed higher management performance than the firms received small scale fund. While management performance was decreasing or slowing down over time after financial support, management performance of the firms supported by facility fund improved over time. From a non-financial perspective, the firms received facility fund invested more in education and growing perspective than the firms received working fund. As the size of fund increased, the investment in education, growing, internal process and customer increased. Personnel expenses and employee benefits for education and growing has increased over time. However, the firms with facility fund restricted the expenses of education, personnel expenses and employee benefits as time goes by. Because the effects of public loan on credit rating of fisheries corporations have no statistical significance, it has become known that the financial support of public loan program has no influence on the change of credit rating of fisheries corporations. This study attempted performance analysis from a BSC perspective which combine factors of non-financial perspective with factors of financial perspective. Findings from this study suggest the direction of microscopic performance analysis of public loan in fishery industry.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.144-152
• /
• 2011

고고도에서 장시간 운용되는 무인항공기용 추진시스템의 고고도 운용 특성을 연구하기 위하여 고도엔진시험설비를 이용한 엔진성능 시험이 필요하다. 기존의 범용 고도엔진시험설비를 이용하려면 시험설비와 엔진 사이에 부가적인 시험설비가 요구되는데, 이중 엔진 성능에 직접 영향을 미치는 흡입구 및 배기덕트의 적절한 설계가 매우 중요하다. 만일 흡입구 및 배기덕트가 적절히 설계되지 않을 경우 유동특성 변화와 압력손실 저하로 인한 엔진 성능 저하가 실제 비행 상태와 달라질 수 있기 때문이다. 본 연구에서는 범용 고도시험설비 내 엔진 흡입구 및 배기덕트의 형상을 3D 모델링하고 ANSYS사의 CFX 전산유체역학(CFX) 프로그램을 이용하여 설계된 형상의 유동 및 압력손실 해석을 수행한 다음 엔진성능해석 프로그램을 이용하여 덕트 손실을 고려한 엔진에 성능을 분석한다. 마지막으로 반복적인 설계형상 해석을 통해 최적화된 흡입구 및 배기덕트 형상을 제안한다.