• Journal of the Korean GEO-environmental Society
• /
• v.24 no.1
• /
• pp.15-23
• /
• 2023

The grouting method is a method of construction for the purpose of waterproofing and reinforcing soft ground. When grout is injected into the ground, there are various types of penetration and diffusion of grout depending on the shape of the ground, the size of soil, the porosity, and the presence or absence of groundwater. the current situation. Therefore, in this study, to investigate the penetration performance of the grouting to conductive material, laboratory tests were performed on the addition of the conductive material. In the injection test, 0%, 3%, and 5% of the mixed water were added as conductive materials to the grout, and the original ground condition was composed of various types of ground composed of gravel and silica sand. Conductive grout is injected by pressure into the model ground using a dedicated injection device, and the injection time (t), pressure (p), flow rate (v) and injection amount (q) are measured, and the hardened body injected in the model ground is collected. Penetration performance was evaluated. In the results of the grout injection experiment, the amount of conductive material used and the grout injection rate showed an inverse relationship, and it was confirmed that the penetration pattern was changed according to the size of the soil particles in the model ground. The grout containing the conductive material has relatively good penetration into the ground and excellent strength and durability of the hardened body, so it was judged that it could be used as an additive for measuring the penetration range of the grout.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.169-176
• /
• 2021

In this study, pull-out tests were conducted at room temperature, 150 ℃ and 250 ℃ to evaluate the residual bond strength of carbon fiber reinforcement polymer, CFRP after elevated temperature and deformed steel rebar of D10 and D13 were also evaluated after the high temperature heating for comparison. As a result of the experiment, the bond strength of the CFRP after 150 ℃ and 250 ℃ decreased by 9.94 % and 41 %, respectively. On the other hand, after thermal heating, both the steel rebar of D10 and D13 had a lower rate of reduction in bond strength than that of the CFRP. Also slip at the maximum bond strength also decreased after the heating for both the CFRP and the rebars. Through it, the correlation between the bond strength and the slip reduction due to thermal heating was confirmed and bond slip models were presented. Finally the experimental result was evaluated as relative bond strength to identify the residual bond performance of the CFRP and the rebar after the heating was confirmed by comparing with the existing test result of the bond strength after elevated temperature.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.73-79
• /
• 2007

We investigated the effects of dietary supplements such as probiotics, illite, active carbon and hardwood vinegar on growth performance and meat quality characteristics in finishing pigs. One hundred fifty pigs ($Landrace{\times}Yorkshire{\times}Duroc$; $32.3{\pm}1.3 kg$ average initial body weight) were used for a 100 day experiment. Pigs were randomly placed into one of five experimented diet groups (control, 0.2% probiotics, 1.0% illite, 1.0% active carbon, and 1.0% hardwood vinegar) and were slaughtered at approximately 110 kg live weight. The addition of 1.0% active carbon and hardwood vinegar caused a decrease in free water while, WHC (water holding capacity) was higher compared with controls. Drip loss in hog flesh was decreased by feeding probiotics, illite, active carbon and hardwood vinegar. Cooking loss was decreased when hogs were fed hardwood vinegar. Lightness ($L^*$) and redness ($a^*$) were no difference between the all treatment groups, yellowness ($b^*$) was higher when feeding active carbon and hardwood vinegar by 1.0%. When hogs were fed hardwood vinegar, drip loss was decreased, and meat color was higher in sensory evaluation of fresh meat. In cooked hog meat, meat color and juiciness were higher in hogs fed hardwood vinegar. These results showed that supplementing hog diets with 1.0% hardwood vinegar may noticeably improve the meat quality of finishing hogs.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.34-45
• /
• 2013

Recently, world-wide research activities on new network architectures and protocols are being actively progressed. Furthermore, research activities on testbed and related technologies for supporting those activities are being actively performed. In domestic study, research on the OpenFlow protocol based future Internet testbed implementation and research on its virtualization for supporting independent research experiments are being performed at the same time. The network virtualization is a technology which maximizes the testbed utilization without interfering each other for the individual research when many researchers share the testbed. In this paper, we implemented a Enhanced FlowVisor by extending basic FlowVisor by adding QoS functions which are admission control and minimum bandwidth guarantee. On the testbed, we performed a real-time video streaming experiment for verifying the performance of the Enhnaced FlowVisor on the OpenFlow protocol based future internet testbed. The result shows that the Enhanced FlowVisor can provide reliable and stable QoS to the individual researches without disturbing each other traffic on virtualized networks of the future Internet testbed.

• Land and Housing Review
• /
• v.14 no.4
• /
• pp.111-120
• /
• 2023

Indoor air quality has become increasingly important with the increase in time spent in residential environments, impact of external fine dust, yellow dust, and the post-COVID 19 pandemic. Residential mechanical ventilation plays a key role in addressing indoor air quality. The legal standard for residential air changes per hour in Korea is 0.5 ACH. However, there are no standards for the location of supply and return vents. This study atempts to analyze the impact of ventilation performance based on the location of supply and return vents. An experiment was conducted using the CO₂ tracer gas concentration decay method in a mock-up house set inside a large chamber to minimize external influences. The experimental results indicated that the commonly used combination of 2 supply and 2 return vents in living room spaces had a lower mean age of air than the combination of 1 supply and 2 return vents. Using multiple supply and return vents had lower mean age of air than using just 1 supply and 1 return vent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6089-6097
• /
• 2012

This study suggested a method of detecting an incident inside tunnel by using camera that is installed within the tunnel. As for the proposed incident detection method, a static object, travel except vehicles, smoke, and contra-flow were detected by extracting the moving object through using the real-time background image differencing after receiving image from the camera, which is installed inside the tunnel. To detect the moving object within the tunnel, the positive background image was created by using the moving information of the object. The incident detection method was developed, which is strong in a change of lighting that occurs within the tunnel, and in influence of the external lighting that occurs in the entrance and exit of the tunnel. To examine the efficiency of the suggested method, the experimental images were acquired from Marae tunnel and Expo tunnel in Yeosu of Jeonnam and from Unam tunnel in Imsil of Jeonbuk. Number of images, which were used in experiment, included 20 cases for static object, 20 cases for travel except vehicles, 4 cases for smoke, and 10 cases for contra-flow. As for the detection rate, all of the static object, the travel except vehicles, and the contra-flow were detected in the experimental image. In case of smoke, 3 cases were detected. Thus, excellent performance could be confirmed. The proposed method is now under operation in Marae tunnel and Expo tunnel in Yeosu of Jeonnam and in Unam tunnel in Imsil of Jeonbuk. To examine accurate efficiency, the evaluation of performance is considered to be likely to be needed after acquiring the incident videos, which actually occur within tunnel.

• Journal of the Korean Society of Radiology
• /
• v.14 no.2
• /
• pp.139-148
• /
• 2020

The purpose of this study is to propose a method to optimize the performance of Digital Radiography (DR) by analyzing the effect of exposure time change on the stability of radiation output and image quality. The experimental method was used to change the exposure time to 50 msec, 100 msec, 200 msec, and 400 msec so that the Percentage Average Error (PAE), Time-to-Radiation Dose Curve, Signal to Noise Ratio (SNR), Contrast to Noise Ratio (CNR) and theses analysis were performed to evaluate the normal operation of parameters, radiation output and image quality. As a result, all the parameters used in the experiment showed the Percentage Average Error in the normal range, and the shorter the exposure time, the stability of radiation output and image quality decrease. In conclusion, it was found that the performance of Digital Radiography can be optimized when stable radiation output and image quality are applied by applying 100 msec ~ 200 msec exposure time.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.1
• /
• pp.129-139
• /
• 2019

Mapping urban areas using the earth observation satellites is useful for monitoring urban expansions and measuring urban developments. In this research, the different thresholds for detecting the urban areas separately from the remote-sensing index images (normalized-difference built-up index(NDBI) and urban index(UI) images) generated from the Landsat-8 image acquired in Daegu, South Korea were evaluated through the following steps: (1) the NDBI and UI images were separately generated from the given Landsat-8 image; (2) the different thresholds (-0.4, -0.2, and 0) for detecting the urban areas separately from the NDBI and UI images were evaluated; and (3) the accuracy of each detected urban area was assessed. The experiment results showed that the threshold -0.2 had the best performance for detecting the urban areas from the NDBI image, while the threshold -0.4 had the best performance for detecting the urban areas from the UI image. Some misclassification errors, however, occurred in the areas where the bare soil areas were classified into urban areas or where the high-rise apartments were classified into other areas. In the future research, a robust methodology for detecting urban areas, including the various types of urban features, with less misclassification errors will be proposed using the satellite images. In addition, research on analyzing the pattern of urban expansion will be carried out using the urban areas detected from the multi-temporal satellite images.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.4
• /
• pp.125-132
• /
• 2021

As the layers of artificial neural network deepens, and the dimension of data used as an input increases, there is a problem of high arithmetic operation requiring a lot of arithmetic operation at a high speed in the learning and recognition of the neural network (NN). Thus, this study proposes a data dimensionality reduction method to reduce the dimension of the input data in the NN. The proposed Line-segment Feature Analysis (LFA) algorithm applies a gradient-based edge detection algorithm using median filters to analyze the line-segment features of the objects existing in an image. Concerning the extracted edge image, the eigenvalues corresponding to eight kinds of line-segment are calculated, using 3×3 or 5×5-sized detection filters consisting of the coefficient values, including [0, 1, 2, 4, 8, 16, 32, 64, and 128]. Two one-dimensional 256-sized data are produced, accumulating the same response values from the eigenvalue calculated with each detection filter, and the two data elements are added up. Two LFA256 data are merged to produce 512-sized LAF512 data. For the performance evaluation of the proposed LFA algorithm to reduce the data dimension for the recognition of handwritten numbers, as a result of a comparative experiment, using the PCA technique and AlexNet model, LFA256 and LFA512 showed a recognition performance respectively of 98.7% and 99%.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.761-772
• /
• 2007

This study was conducted to evaluate effects of dietary pine cone meal on growth performance, blood characteristics, carcass quality and fecal noxious gases compounds in finishing pigs. The total of sixty [(Landrace×Yorkshire)×Duroc] pigs(86.01±0.25kg in average initial body weight) were used in 35 days assay. Dietary treatments included 1) T1(2% cottonwood sawdust), 2) T2(1% cottonwood sawdust+1% pine cone meal) and 3) T3(2% pine cone meal). There were three dietary treatments with five replicate pens per treatment and four pigs per pen. During the overall periods, there were no significant differences in ADG(Average daily gain), ADFI(Average daily feed intake) and gain/feed ratio among treatments (P>0.05). Also, Nutrient digestibilities and blood characteristics were not affected by dietary treatments. At the end of this experiment, a*-value of logissimus dorsi muscle color and sensory evaluation color were higher in T3 treatment than T1 treatment(P<0.05). In fatty acid contents of lean, C18:1 and total MUFA were significantly lower in T1 treatment than other treatments(P<0.05). However, total ω6 and total PUFA were higher in T1 treatment than T2 treatment(P<0.05). In fatty acid contents of fats, total SFA was significantly higher in T2 treatment than T3 treatment(P<0.05). C18:1 was higher in T2 treatment than T1 treatment(P<0.05). There were no significant differences in fecal noxious gas compounds among the treatments. In conclusion, the results of the experiment was affected by dietary supplementation of pine cone meal on meat color and fatty acid composition of pork in finishing pigs.