• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제12권2호
• /
• pp.119-131
• /
• 2008

The paper considers the computation method in the performance evaluation of cellular network in the phase-type distribution assumptions that the channel holding times induced from mobility are modeled by well-fitted distributions to reflect an actual situation. When ww consider a phase-type distribution model instead of exponential distribution, the complexity of the computation increase exponential even though the accuracy is improved. We consider an efficient numerical algorithm to compute the performance evaluations in cellular networks such as a handoff call dropping probability, new call blocking probability, and handoff arrival rate. Numerical experiment shows that numerical analysis results are well approximated to the results of simulation.

• 한국태양에너지학회 논문집
• /
• 제23권1호
• /
• pp.48-56
• /
• 2003

Three of the leading computer daylighting simulation programs are compared with physical modeling techniques as a means of predicting daylighting performance of interior spaces. Lumen-Micro, Adeline and Lightscape are compared with physical model experiments under clear sky conditions. The comparative evaluations are conducted on analysis of daylight illuminance ratio(%) depending on model types. The estimated average errors are analyzed on 9.4% in Lumen-Micro, 6.3% in Adeline and 3.4% in Lightscape. Therefore, it is proved that three programs are useful for evaluating daylighting performance in our clear sky condition.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.239-243
• /
• 2001

In evaluating sound performance of building, it is important to carry on tests and evaluations based upon residential sound performances. Korean Standards include test methods on sound performance, but don't include any code on evaluation methods. Therefore, evaluation methods from Japan or ISO have been used for evaluating sound performance in domestic so far. In this study, every regulation from ISO, JIS, ASTM, especially for airborne sound insulation against building and building element, is analyzed in order to apply to establishment of Korean Standards on a sound performance evaluation method in buildings.

• 국제초고층학회논문집
• /
• 제1권3호
• /
• pp.155-167
• /
• 2012

This paper introduces the outlines of review and approval processes, general criteria and usual practices taken in Japan for the seismic design of high-rise buildings. The structural calculations are based on time-history analyses followed by performance evaluations. This paper also introduces structural design of two high-rise buildings: one is a 100 m high reinforced concrete residential building, and the other is a 300 m high steel building for mixed use.

• Structural Engineering and Mechanics
• /
• 제65권3호
• /
• pp.251-261
• /
• 2018

Self-centering concentrically braced frames (SCCBFs) are emerging as high performance seismically resistant braced framing system, due to the capacity of withstanding strong earthquake attacks and promptly recovering after events. To get a further insight into the seismic performance of SCCBFs, systematical evaluations are currently conducted from the perspective of modal contributions. In this paper, the modal pushover analysis (MPA) approach is utilized to obtain the realistic seismic demands by summarizing the contribution of each single vibration mode. The MPA-based results are compared with the exact results from nonlinear response history analysis. The adopted SCCBFs originate from existing buckling-restrained braced frames (BRBF), which are also analyzed for purpose of comparison. In the analysis of these comparable framing systems, interested performance indices that closely relate to the structural damage degree include the interstory drift ratio, floor acceleration, and absorbed hysteretic energy. The study shows that the MPA approach produces acceptable predictions in comparison to the exact results for SCCBFs. In addition, the high-modes effect on the seismic behavior increases with the building height, and is more evident in the SCCBFs than the BRBFs.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.70-77
• /
• 2004

Comprehensive investigation on the outlet's geometric shapes of a centrifugal blower with higher inlet resistance than an atmospheric pressure is carried out for improvements of its performance. Most unwanted behaviors of such blower are pulsating flows because of unbalance between inflows and outflows in a scroll casing. In order to reduce this undesirable phenomenon a triump is made for both the shape of outlet duct and an accessory structure inserted in the outlet port of the blower. The modification on the shape is concerned with the contraction of cross sectional area and the attached structure is for an intentional obstruction to cause a flow resistance. The details of the modification are examined for different cases and results. The methodologies for the work are performance evaluations including noise level and velocity measurements with PIV Consequently, the performance of improved system is close to that of the system operating with atmospheric pressure at the inlet.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 추계학술대회 및 정기총회
• /
• pp.13-18
• /
• 2005

Routers determine routing path considering network topology and link state information for providing QoS (quality of service) guarantee. Therefore, it is important that routers know link state information to calculate routing path. However, if routers generate link state update messages inordinately, their router performance are reduced due to the process of link state update messages. On the other side, in case that link state information is not updated appropriately, route setup requests can be rejected even though there exist routes. In this paper, we propose an algorithm to improve router performance and evaluate the proposed algorithm performance compare with conventional algorithm by simulations.

• 설비공학논문집
• /
• 제10권3호
• /
• pp.358-367
• /
• 1998

Since the performance of cooling tower is strongly dependent on the thermal performance of the packing, the evaluations of heat transfer rate and fan power from various packing have attracted intense interest. In the present study, two new packings have been devised and their performances have been compared with those of two existing packings to find better shape characteristic. It is found that one of the existing packings, which showed high heat transfer rate and medium fan power due to zig -zag flow passages and highly irregular surfaces, should be adapted.

• Educational Technology International
• /
• 제10권1호
• /
• pp.107-135
• /
• 2009

The purpose of this paper is to review a variety of challenges facing the Human Performance Technology (HPT) in supporting knowledge workers' performance, and to explore possible HPT models for knowledge workers. The first section of this paper investigates the core attributes and major models of HPT as a foundation. While HPT has a lot of strengths in terms of systemic, systematic, methodologically eclectic, evidence based, and results oriented approaches, some pitfalls - which could be detected if these principles were mindlessly applied to problem areas - are explored. The second section presents some considerations such as analysis, intervention design, and leadership that HP technologists need to take in order to make HPT a better field of practice for knowledge workers. The author also suggests a tentative diagnostic model and a process model for knowledge workers, core principles of which are based on systems thinking, in particular Senge's the fifth discipline and Checkland's soft systems methodology. The importance of formative evaluations to improve these models is noted as a conclusion.

• 한국강구조학회 논문집
• /
• 제17권1호통권74호
• /
• pp.33-43
• /
• 2005

본 논문은 스틸스터드로 구성된 골조에 경량기포모르터를 타설 양생하여 제작한 경량합성벽체의 반복가력 전단실험에 의한 에너지 소산능력과 압축내력 실험을 통한 압축성능의 평가에 대한 연구이다. 경량기포모르터의 유무, 경량기포모르터의 비중(0.6, 0.8, 1.0, 1.2), 마감재(경량기포모르터, OSB, 석고보드) 및 브레이스의 유무, 벽체의 단위(1단위-$900mm{\times}2,400mm$, 2단위-$1,800mm{\times}2,400mm$)를 변수로 하여 실시하였던 경량합성벽체의 전단내력 평가 실험 가운데 반복 실험 결과를 동일 조건의 단조 실험과 비교하였다. 또한 기존 스틸하우스벽체와 경량합성벽체의 압축내력도 실험을 통해 조사하였다. 반복가력 실험결과, 단조가력 실험체의 거동과 약간의 차이를 보이고 있으며 이는 벽체에 채운 경량기포모르터의 비중에 따른 차이라고 생각된다. 압축내력 실험결과, 기존형 실험체에 비하여 경량기포모르터를 타설한 실험체의 최대내력은 2~2.5배, 초기강성은 2~3배 정도 증가하였다.