• Sleep Medicine and Psychophysiology
• /
• v.10 no.1
• /
• pp.12-19
• /
• 2003

Sleepiness, or hypersomnia, is a relatively common complaint and one of the main problems of modern society. Accurate evaluation and diagnosis of sleepiness are important. The methods used for evaluating sleepiness are subjective measures or self-evaluations, performance decrease measures, sleep propensity measures, and arousal decrease measures. A clear and detailed history is important in differential diagnosis of sleepiness because symptoms of sleepiness may be expressed in terms of 'tiredness' or 'fatigue' that do not directly denote sleepiness. Comprehensive diagnostic evaluation is also invaluable because these symptoms may result from a variety of causes ranging from medical disorders to insufficient nocturnal sleep.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.3
• /
• pp.149-156
• /
• 1992

A method for designing high speed spindle is presented in order to enhance the machining accuracy in consideration of vibration characteristics. Experimetal evaluations of the spindle HS 430 as a prototype are made efficiently with the help of bending vibration modes for nonrotational and rotationalstate comparing with the commercial spindle V430. As a result the spindle of HS 430 shows the superior performance than that of V 430.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.200-202
• /
• 1997

배전계통의 보호능력을 평가하는 방안을 제시한다. 보호관점에서 계통이 가지는 상태를 하고 주어진 계통이 어떤 상태인지를 평가하기 위해 보호기기감도, 보호기기 동작시간차이, 지락저항감지 능력, 기기보호여부, 후비보호구간의 크기의 5가지 요소를 종합적으로 고려 는 지수인 보호도(Protectability)를 제시한다.

• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.386-390
• /
• 2011

This paper deals with the magnetic equivalent circuit modeling and permanent magnet (PM) performance evaluations of a pole changing memory motor (PCMM). We use a coupled transient finite element method (FEM) and Preisach modeling, which is presented to analyze the magnetic characteristics of the permanent magnets. The focus of this paper is on the evaluation of characteristics such as the magnetizing direction and the pole number of the machine under re- and de-magnetization conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2001.11a
• /
• pp.11-14
• /
• 2001

3-D compressible flow analysis was conducted by using mixing plane method for turbine system which is consisted of partial admission nozzle and rotor. Computational results are shown oblique shock wave in blade leading and trailing edge and also shown flow separation along suction surface of blade due to abrupt blade curvature. But computational results are well agree with 1-D calculation results and experimental data.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.683-687
• /
• 2007

Internally Confined Hollow-Concrete Filled Tube(ICH-CFT) column which has two tubes on both side of concrete, inner tube and outer tube perform great seismic abilities, ductility and absorption of energy, by the tubes and the hollow pmt. So this study does qualitative analysis about seismic capacities depending on parameters diameter of column, hollow ratio, thickness of tubes - by moment-curvature analysis.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.1
• /
• pp.53-67
• /
• 1996

Since Romberg's test in 1953, the analysis of postural sway during upright stance has been widely used as a tool for evaluating balance and disorders of the postural control system. This review describes the methods that have been used to evaluste the static and dynamic performance of the postural control system. Various identification methods of postural control system based on standing balance are discussed and measures of postural sway are described. The application areas of standign balance research, with an emphasis on postural control evaluations, are also briefly described. This review can be used to gain an understanding of the dynamics of human standing balance.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.1
• /
• pp.119-124
• /
• 2010

This paper addresses the design and fabrication of desktop die-sinking dry electrical discharge machining (EDM) system and its experimental performance analysis. The developed desktop dry EDM machine has the horizontal configuration with the size of $300{\times}200{\times}260mm$. The experimental performance analysis is conducted to investigate the effects of EDM conditions and dielectric gas temperature on the surface roughness of EDMed slots and number of EDM sparks. The experimental results demonstrate that low feed rate and large electrode displacement are good for better surface roughness and more number of EDM sparks. In addition, low temperature of dielectric gas results in better surface roughness.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.5
• /
• pp.48-54
• /
• 2010

The analysis of the seismic risk of an offshore structure with a control device is presented. First, a probability density function was developed to represent seismic hazard, and seismic fragility under artificial earthquake conditions was determined. Fragility curves for an offshore structure with both passive and active control devices were determined. Displacement criteria were set to evaluate the performance of the structure. Based on numerical analysis, the seismic risk to the structure was considerably reduced when the structure had a seismic control device. The seismic risk to the actively controlled structure was decreased by 80% compared to the uncontrolled case. Reasonable performance evaluations of offshore structure with control devices can be conducted through risk analysis.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.4
• /
• pp.337-342
• /
• 2012

This paper presents performance evaluation of real-time mechanisms for real-time embedded linux. First, we presents process for implementing open-source real-time embedded linux namely RTAI and Xenomai. These are real-time extensions to linux kernel and we implemented real-time embedded linux over the latest linux kernel. Measurements of executions of real-time mechanisms for each distribution are performed to give a quantitative comparison. Performance evaluations are conducted in kernel space about repeatability of periodic task, response time of Semaphore, FIFO, Mailbox and Message queue in terms of inter-task communication for each distribution. These rules can be helpful for deciding which real-time linux extension should be used with respect to the requirements of the real-time applications.