• The Journal of Korean Medical History
• /
• v.33 no.1
• /
• pp.79-97
• /
• 2020

We discovered various sides of Lee Jema's tenure as the governor of Jinhae by looking at recently found historical materials of the central government of Joseon. Lee Jema went to his appointed post in Jinhae in February of 1887 and was replaced before the termination of his office in June of 1888. Since his replacement did not immediately arrive at Jinhae, Lee Jema continued to perform his duties until the first half of 1889. The difference between the date of his resignation and the arrival of his replacement reveals why various historical materials disagree about when he left office. After Lee Jema's official resignation in June of 1888, he was appointed to the honorary posts of Naegeumjang and Cheomji, which indicates the termination of his career as an official. Two superior officials conducted job assessments on Lee Jema three times during his service (once every six months) and these are the rare evaluations which were performed during his lifetime. Lee Jema was highly regarded in terms of job competency by two superiors in succession, which was unique for a local government official in the late Joseon dynasty. One of the job assessments referred to the potential of his performance as an official which usually implied that he was a suitable candidate for higher rank. This might have derived from Lee Jema's study of statecraft. Lee Jema's love for the people as an official was also mentioned in one of the job assessment reports. This is borne out by his quelling the revolt of Hamheung Province in 1896.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.190-198
• /
• 2020

For domestic urban railways, which have a 19.7% aging rate, a performance evaluation is necessary to establish capital improvement investment plans. The performance evaluation, which was recently enacted in the relevant law, points out the excessive time and effort for acquiring data and evaluation. This study developed a performance evaluation simulation prototype using a virtual reality (VR) method to use as training contents for railway performance evaluations. The practical use of the VR technique to reduce the working time under poor environment conditions was confirmed through a literature review. A survey and consultation were conducted for urban railway experts to determine the weight of the performance evaluation items and the facility breakdown structure. This information was utilized to develop performance evaluation sheets for simulation. Based on the evaluation sheet, a training content prototype that evaluates the performance of platform safety doors was developed using VR techniques with HTC VIVE equipment. VR simulation tests were conducted for six players, and the prototype was sufficiently advantageous for a visual confirmation of the facility information. The result is expected to be useful for engineers to understand the performance evaluation process efficiently before an actual performance evaluation of urban railway facilities.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.51-58
• /
• 2004

The input-oriented project promotion system private participation in infrastructure projects currently in use in Korea has encountered difficulties in securing the primary benefits of private sector creativity problem solving and inflow of private capital. As such, the performance (or output)-oriented procurement process implemented in England and other developed countries should be evaluated for introduction. In Korea, private participation projects are currently identified as either solicited or unsolicited projects, each with different promotional procedures, the problem with these procedures is that competition is not pre-activated, the private sectors creativity is under utilized, and the rationality of project evaluations is inconsistent. Korea should, in order to raise the level of private sector creativity and efficiency, go beyond the currently applied Input Specification project promotion system to a Performance-oriented system similar to those implemented in England and other countries. To achieve this, we mate several proposals for the introduction of the performance-oriented system. We divide the main features of our proposals into three categories, including a reformed concessionaire selection system, a performance orientation in preparation of the concession agreement, and a performance orientation in contract management, and discuss each. 1'his study describes performance-oriented promotion systems in an output-focused way As this is an initial study on the introduction of performance orientation in private participation, various key points and proposals were identified. However, in the future, detailed research in technical fields and systems, legal research, and practical projects will be needed for implementation

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.5
• /
• pp.84-90
• /
• 2012

Since the major cellular data service providers in U.S, Japan as well as in Korea started the LTE (Long Term Evolution) service, there has been more strong need for the methods that can accurately measure the MIMO (Multi Input-Multi Outout) OTA (Over The Air) performance of LTE handsets because the performance of the MIMO antenna determines the packet data rates in the downlink and therefore the higher system throughput of the network. In this regard, there has been a lot discussions in 3GPP on the candidate MIMO OTA test solutions. In this paper, a faire comparison has been done for the conventional method, the Envelop Correlation Coefficient (ECC) measurements, and the anechoic chamber based MIMO OTA test solution, one of the candidate system being discussed in 3GPP. The evaluations and the comparisons are conducted by numerically and experimentally.

• The Journal of Society for e-Business Studies
• /
• v.25 no.3
• /
• pp.77-93
• /
• 2020

The literature has reported that hierarchical classification methods generally outperform the flat classification methods for a multi-class document classification problem. Unlike the literature that has constructed a class hierarchy, this paper evaluates the performance of hierarchical and flat classification methods under a situation where the class hierarchy is predefined. We conducted numerical evaluations for two data sets; research papers on climate change adaptation technologies in water sector and 20NewsGroup open data set. The evaluation results show that the hierarchical classification method outperforms the flat classification methods under a certain condition, which differs from the literature. The performance of hierarchical classification method over flat classification method depends on class similarities at levels in the class structure. More importantly, the hierarchical classification method works better when the upper level similarity is less that the lower level similarity.

• The Journal of Korea Robotics Society
• /
• v.7 no.4
• /
• pp.292-298
• /
• 2012

It is a real-time system that the system correctness depends not only on the correctness of the logical result of the computation but also on the result delivery time. Real-time Operating System (RTOS) is a software that manages the time of a microprocessor to ensure that the most important code runs first so that it is a good building block to design the real-time system. The real-time performance is achieved by using real-time mechanisms through data communication and synchronization of inter-task communication (ITC) between tasks. Therefore, test on the response time of real-time mechanisms is a good measure to predict the performance of real-time systems. This paper aims to analysis the response characteristics of real-time mechanisms in kernel space for real-time embedded Linux: RTAI and Xenomai. The performance evaluations of real-time mechanism depending on the changes of task periods are conducted. Test metrics are jitter of periodic tasks and response time of real-time mechanisms including semaphore, real-time FIFO, Mailbox and Message queue. The periodicity of tasks is relatively consistent for Xenomai but RTAI reveals smaller jitter as an average result. As for real-time mechanisms, semaphore and message transfer mechanism of Xenomai has a superior response to estimate deterministic real-time task execution. But real-time FIFO in RTAI shows faster response. The results are promising to estimate deterministic real-time task execution in implementing real-time systems using real-time embedded Linux.

• The Journal of the Korea Contents Association
• /
• v.17 no.11
• /
• pp.183-191
• /
• 2017

In order to secure the convenience of information retrieval by users of scientific information service platforms and to reduce the time required to acquire the proper information, this study proposes an optimized content recommendation algorithm among the algorithms that currently provide service menus and content information for each service, and conducts comparative evaluation on the results. To enhance the recommendation accuracy, users' major items were added to the original algorithm, and performance evaluations on the recommendation results from the original and optimized algorithms were performed. As a result of this evaluation, we found that the relevance of the content provided to the users through the optimized algorithm was increased by 21.2%. This study proposes a method to shorten the information acquisition time and extend the life cycle of the results as valuable information by automatically computing and providing content suitable for users in the system for each service menu.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.5
• /
• pp.57-63
• /
• 2009

A modeling and simulation program for an environmental control system (ECS) of a pod installed under wings of an aircraft was developed in order to estimate the system‘s performance during a flight. First, through the system configuration analysis in the main operational condition of the aircraft system, an ECS configuration adopting an air cycle machine (ACM) was selected. Therefore the modeling program was developed to simulate the ECS with an ACM. Second, the sensitivity analyses on performance variation of main components were conducted to complete the conceptual design of the ECS. A design point for the system and its components was obtained through the analysis with the modeling and simulation program. The design point for the system and components was obtained through the analysis with the modeling and simulation program. Third, in order to study the feasibility of the ECS configuration, off-design performances of the ECS on various flight conditions, such as take off, maneuver, cruise and landing etc were estimated. Dynamic characteristics were analyzed by transient performance evaluations.

• Journal of Korea Multimedia Society
• /
• v.17 no.1
• /
• pp.26-33
• /
• 2014

Video retrieval and indexing are performed by comparing feature similarities between key frames in shot after detecting a scene change and extracting key frames from the shot. Typical image features such as color, shape, and texture are used in content-based video and image retrieval. Many approaches for integrating these features have been studied. However, the issue of these approaches is how to appropriately assign weighting of key frame features at query time. Therefore, we propose a new video retrieval method using adaptively weighted image features. We performed computer simulations in test databases which consist of various kinds of key frames. The experimental results show that the proposed method has better performance than previous works in respect to several performance evaluations such as precision vs. recall, retrieval efficiency, and ranking measure.

• The KIPS Transactions:PartC
• /
• v.13C no.6 s.109
• /
• pp.785-794
• /
• 2006

Nowadays, Internet is used worldwide and network traffic is increasing dramatically. Much of Internet traffic is due to the web applications. And I propose a new cooperative web caching scheme, called DCOORD which tries to minimize the overall cost of Web caching. DCOORD reduces the communication cost by coordinating the objects which are cached at each cache server. In this paper, I compare the Performance of DCOORD with two well-known cooperative Web caching schemes, ICP and CARP, using trace driven simulation. In order to reflect the cost factor in the network communication, I used the CSR(Cost-Saving Ratio) as our performance metric, instead of the traditional hit ratio. The performance evaluations show that DCOORD is more cost effective than ICP and CARP.