• KIEE International Transactions on Power Engineering
• /
• 제2A권4호
• /
• pp.160-165
• /
• 2002

This paper describes a proposed performance criteria and evaluation procedures for transmission system planning in Korea. Performance criteria of the transmission system are expected to be used as a guideline for investment into a transmission network. Moreover, performance evaluation procedures, which are based on current practices and widely accepted theories, are suggested to achieve fair and acceptable results.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권3호
• /
• pp.261-267
• /
• 2021

As the number of Coronavirus Disease-19 (COVID-19) patients increases in a global pandemic situation, the usefulness of mobile computed tomography (CT) is gaining attention. Currently, mobile CT follows the basic safety and essential performance evaluation criteria of whole-body or limited-view X-ray CT in order to obtain device approval and evaluation in the Republic of Korea. Unlike stationary CT, mobile CT is not operated in shielded areas but rather areas such as intensive care units, operating rooms, or isolation rooms. Therefore, it requires a different basic safety and essential performance evaluation standard than stationary CT. In this study, four derived basic safety evaluation criteria related to electrical, mechanical, and radiation safety were included (dose indication test, protection against stray radiation, safety measures against excessive X-rays, half-value layer measurement); and seven essential performance evaluation criteria were included (tube voltage accuracy, mAs accuracy, radiation dose reproducibility, CT number of water, noise, uniformity, and spatial resolution); total eleven basic safety and essential performance evaluation criteria were selected. This study aims to establish appropriate basic safety and essential performance evaluation criteria for simultaneously obtaining images with diagnostic value and reducing the exposure of nearby patients, medical staff, and radiologic technologists during the use of mobile CT.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.209-212
• /
• 2007

It is increased electrical energy consumption with the development of intelligence society in buildings and thus an energy conservation through efficient use of electricity and reliability, safety, etc became more important. This research paper intensively investigated performance based construction specifications and design criteria of electrical installations in domestic and foreign country. It is necessary to analyze the key features based on performance and general trend about contractor guarantee, warranty method, performance design criteria from the investigated data. This paper shows a reasonable performance based construction specifications and design criteria of electrical installations.

• 대한토목학회논문집
• /
• 제26권5D호
• /
• pp.703-708
• /
• 2006

미국, 일본 등에서는 ITS 장비 성능시험장을 구축하여 정보의 신뢰성 강화, 표준화 및 호환성 확보 등에 활용하고 있다. 본 연구에서는 이러한 외국사례를 검토하여 시험장 선정기준을 제시하고 그에 부합하는 성능시험장을 구축하였으며 ITS 장비 성능시험장의 시범운영을 실시하고 그 시험결과를 분석함으로써 ITS 장비 성능시험장 구축의 중요성을 확인하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권2호
• /
• pp.127-134
• /
• 2022

In order to overcome the image quality limitations of the conventional C-arm, a flat panel detector (FPD) is used to enhance spatial resolution, detective quantum efficiency, frame rate, and dynamic range. Three-dimensional (3D) visualized information can be obtained from C-arm computed tomography (CT) equipped with an FPD, which can reduce patient discomfort and provide various medical information to health care providers by conducting procedures in the interventional procedure room without moving the patient to the CT scan room. Unlike a conventional C-arm device, a C-arm CT requires different basic safety and essential performance evaluation criteria; therefore, in this study, basic safety and essential performance evaluation criteria to protect patients, medical staff, and radiologists were derived based on International Electrotechnical Commission (IEC) standards, the Ministry of Food and Drug Safety (MFDS) standards in Korea, and the rules on the installation and operation of special medical equipment in Korea. As a result of the study, six basic safety evaluation criteria related to electrical and mechanical radiation safety (leakage current, collision protection, emergency stopping device, overheating, recovery management, and ingress of water or particulate matter into medical electrical (ME) equipment and ME systems: footswitches) and 14 essential performance evaluation criteria (accuracy of tube voltage, accuracy of tube current, accuracy of loading time, accuracy of current time product, reproducibility of radiation output, linearity and consistency in radiography, half layer value in X-ray equipment, focal size and collimator, relationship between X-ray field and image reception area, consistency of light irradiation versus X-ray irradiation, performance of the mechanical device, focal spot to skin distance accuracy, image quality evaluation, and technical characteristic of cone-beam computed tomography) were selected for a total of 20 criteria.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1001-1006
• /
• 2005

A Robot Performance Evaluation System(RPES) with the laser tracker Leica LTD 500 was developed according to the ISO 9283 robot performance criteria. The developed system is set up a test robot to continuously move the prescribed cyclic trajectories without a human intervention and the laser tracker to simultaneously measure the robot's movement. And then, the system automatically extracts the required data from the tremendous measured data, and computes the various performance criteria which represents the present state of the test robot's performance. This paper explains how ISO 9283 robot performance criteria was used for the developed system, and suggests a automatic data extraction algorithm from the mass of measured data. And also, a user-friendly Robot Performance Evaluation System(RPES) Software was developed with Visual Basic satisfying the need of Hyundai Motor Company. The developed system was implemented on NACHI 8608 AM 11 robot. The resulted output shows the effectiveness of the developed system.

• Interaction and multiscale mechanics
• /
• 제3권4호
• /
• pp.405-414
• /
• 2010

The performance of full-scale steel and composite bridge safety barriers under vehicle crash is evaluated by using the nonlinear explicit finite element code LS-DYNA. Two types of vehicles used in this study are passenger car and truck, and the performance criteria considered include structural strength and deformation, occupant protection, and post-crash vehicle behavior. It can be concluded that the composite safety barrier satisfies all performance criteria of vehicle crash. Although the steel safety barrier satisfies the performance criteria of occupant protection and post-crash vehicle behavior, it fails to satisfy the performance criterion of deformation. In all performance evaluations, the composite safety barrier exhibits a superior performance in comparing with the steel safety barrier.

• 한국IT서비스학회지
• /
• 제4권2호
• /
• pp.125-133
• /
• 2005

Because of paradigm change to web service, numerous institutes have been suggested supporting solution about web service, and actively developed system using web service but it is hard to find out a systematic study for web service performance enhancement. Generally, there are SOAP message processing improvement and configuration optimization of server viewpoint for web service performance enhancement. Web service performance enhancement through SOAP message processing improvement have been studied related research but configuration optimization of server is hard to find out a systematic tuning model and performance criteria. In this paper, I suggested performance testing based tuning model and criteria of configuration optimization of server viewpoint. We executed practical analysis using tuning model about web service in internet. This paper show that the proposed tuning model and performance criteria is applicable to web service performance enhancement.

• 산업경영시스템학회지
• /
• 제29권4호
• /
• pp.43-50
• /
• 2006

The objective of this research is to select the most effective technique from AMT (Advanced Manufacturing Technologies) and IMP (Innovative Management Practices) for improving manufacturing performance in shipbuilding enterprises. The research consists of several principal steps. The first step is to design critical criteria in evaluating manufacturing performance in shipbuilding enterprises. The second step is to develop sub-criteria of the critical criteria. The third step is to develop a four level AHP (Analytic Hierarchy Process) structure using the critical criteria, sub-criteria and techniques from AMT and IMP. The fourth step is to develope the pairwise comparison matrix by each level of AHP structure, which was based on survey data collected at the H heavy industry. And the last step is to select the most effective technique from AMT and IMP by using AHP analysis. The results of AHP analysis did not show clear difference in priority between techniques of AMT and IMP in terms of manufacturing performance of the shipbuilding enterprise. Thus, each critical criterion was assigned modified weights and examined the priority change of techniques by conducting performance sensitivity analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.203-205
• /
• 2001

This paper is part of an ongoing project of KEPCO; 'A Study on Criteria and Standards for Transmission System Planning', The objective of this project is to develop the standards and procedures for transmission system planning. This involves reviewing published literatures, other documents of existing criteria and procedures, and various case studies of advanced countries which are already under the competitive electricity industry. This paper presents the result of evaluating Korean Power System as a pre-study for developing the Planning Standards of Korean Power System. For this, WSCC/NERC's performance criteria for planning transmission system, and KEPCO's 'Long Term Transmission System Planning Criteria' are considered. By doing this, the level of performance criteria which should be applied to Korean Power System and the detailed procedures which would be used in system test were reviewed.