• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1310-1317
• /
• 2012

The Global Navigation Satellite System (GNSS) like US Global Positioning System (GPS) and EU Galileo are based on providing precise time and frequency synchronized ranging signals. Because of the exploitation of very precise timing signals these GNSS are used to provide both navigation and time distribution services. Moreover, because the positioning accuracy will improve as more satellites become available, we should expect that a combination of Galileo and GPS will provide better performance than those of both systems separately. However, Galileo will not use the same time reference as GPS and thus, a time difference arises - the GPS-Galileo Time Offset (GGTO). The navigation solution calculated by receivers using signals from both navigation systems will consequently contain a supplementary error if the GGTO is not accounted for. In this paper, we compared GPS Time (GPST) with Galileo Sytem Time (GST) and analyzed the effects of GGTO on positioning accuracy by simulation test. And then we also analyzed the characteristics of two representative GGTO correction methods such as the navigation message based method at system level and the estimation method at user level and propose the conceptual design of the novel correction method being capable of preventing previous method's problems.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.288-293
• /
• 2016

Purpose: The purpose of this study was to investigate the key factors in designing a three-wheeled two-row soybean reaper (riding type) that is suitable for soybean production, and ensure worker safety by proposing optimal work conditions for the prototype of the designed machine in relation to the slope of the road. Methods: A three-wheeled two-row soybean reaper (riding type) was designed and its prototype was fabricated based on the local soybean-production approach. This approach was considered to be closely related to the prototype-designing of the cutter and the wheel driving system of the reaper. Load distribution on the wheels of the prototype, its minimum turning radius, static lateral overturning angle, tilt angle during driving, and The working and rear overturning (back flip) angle were measured. Based on the gathered information, investigations were conducted regarding optimal work conditions for the prototype. The investigations took into account driving stability and worker safety. Results: The minimum ground clearance of the prototype was 0.5 m. The blade height of the prototype was adjusted such that the cutter was operated in line with the height of the ridges. The load distribution on the prototype's wheels was found to be 1 (front wheel: F): 1.35 (rear-left wheel: RL): 1.43 (rear-right wheel: RR). With the ratio of load distribution between the RL and RR wheels being 1: 1.05, the left-to-right lateral loads were found to be well-balanced. The minimum turning radius of the prototype was 2.0 m. Such a small turning radius was considered to be beneficial for cutting work on small-scale fields. The sliding of the prototype started at $25^{\circ}$, and its lateral overturning started at $39.3^{\circ}$. Further, the critical slope angle for the worker to drive the prototype in the direction of the contour line on an incline was found to be $12.8^{\circ}$, and the safe angle of slope for the cutting was measured to be less than $6^{\circ}$. The critical angle of slope that allowed for work was found to be $10^{\circ}$, at which point the prototype would overturn backward when given impact forces of 1,060 N on its front wheel. Conclusions: It was determined that farmers using the prototype would be able to work safely in most soybean production areas, provided that they complied with safe working conditions during driving and cutting.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11S
• /
• pp.3633-3650
• /
• 2000

Internet is no longer a network for special communities but became a global means of communication infrastructure for everyday life. People are exchanging their personal messages using e-mails, students are getting their educational aids through the web, people are buying a variety of goods from cyber shopping malls, and companies are conducting their businesses over the Internet. Recently, such an explosive growth of the traffic in the Internet raised a big concern on how to accommodate ever-changing user's needs in terms of an amount of the traffic, characteristics of the traffic, and various service quality requirements, Over provisioning can be a simple solution but it is too expensive and inefficient. Thus many new technologies to solve this very difficult puzzle have bcen introduced recently, Any single solution, however, can be insufficient and a carefully designed architecture, which integrates a group of solutions, is required. In this paper, we propose a policy-based Internet QoS provisioning, traffic engineering and perfonnance management system as our solution to this problem. Our integrated management QoS solution can provide highly responsive flow-through service provisioning, more realistic service and resource policy control based on the real network performance information, and centralized control of traffic engineering for heterogeneous networks.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.301-308
• /
• 2014

Despite Korea forest take 63.7% of the nation's territory, productivity of domestic structural lumber is low. Studies of domestic small lumbers need to be improved domestic structural timber productivity. In this study, small diameter lumber and finger joint small diameter lumber took bending test to calculate MOE and MOR. MOE of small diameter lumber was $9.3kN/mm^2$ and MOE of finger joint small diameter lumber was $15.4kN/mm^2$. Allowable standard bending stress of small diameter lumber and finger joint small diameter lumber was calculated according to ASTM D 2915. Standard allowable bending stress of small diameter lumber was $12N/mm^2$ and standard allowable bending stress of finger joint small diameter lumber was $11N/mm^2$. Standard allowable bending stress of finger joint small diameter lumber should be considered to design structural beam members.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.3
• /
• pp.79-91
• /
• 2008

Recently, with highly Interest In Location-Based Service(LBS) utilizing location data of moving objects, the GALIS(Gracefully Aging Location Information System) which is a cluster-based distributed computing architecture was proposed as a more efficient location management system of moving objects. In the SLDS(Short-term location Data Subsystem) which Is a subsystem of the GALIS, since the SDP(Short-term Data Processor) Master transmits current location data and queries to every SDP Worker, the SDP Master reassembles and sends query results produced by SDP Workers to the client. However, the services are suspended during the SDP Master under failure and the response time to the client is increased if the load is concentrated on the SDP Master. Therefore, in this paper, the extended SLDS was designed and implemented to solve these problems. Though one SDP Master is under failure, the other can provide the services continually, and so the extended SLDS can guarantee the high reliability of the SLDS. The extended SLDS also can reduce the response time to the client by enabling two SDP Masters to perform the distributed query processing. Finally, we proved high reliability and high availability of the extended SLDS by implementing the current location data storage, query processing, and failure takeover scenarios. We also verified that the extended SLDS is more efficient than the original SLDS through the query processing performance evaluation.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.739-742
• /
• 2019

In this paper, we propose enhanced DAP(Dose Area Product). The development of enhanced DAP proposed in this paper has optimized the area dose meter that was developed previously. The development of enhanced DAP performed Optimized design of charge integrator and ADC circuit, optimization of line transceiver for RS-485 communication, optimization of display circuit, and optimization of PC-based control program for interlocking and aging. As a result of evaluating the performance of the proposed system in an accredited testing laboratory, Radiation dose dependence and Radiation quality dependence were measured to be 4.2%, which is below ${\pm}15%$ of international standard. Energy range/Tube voltage was confirmed in the range of 30~150kV. The sensitivity difference between sensor field and sensor field area dose sensitivity was measured to be 4.3%, and it was confirmed that it operates normally under ${\pm}15%$ of international standard. In order to measure the reproducibility of the area dosimeter, it was confirmed that it was 0% and it was operated normally at less than 2% of IEC60580 recommendation. Digital resolution was confirmed to be a minimum unit of $0.01{\mu}Gy{\cdot}m^2$ within the error range for the reference dose per hour.

• The Korean Journal of Archival Studies
• /
• no.29
• /
• pp.35-78
• /
• 2011

This study is intended to recommend for acquisition methods of the theatre collection. Theatre activities is representative of the performing arts, and the Korea theatre history start from the modern history of Korea. In the meantime, theatre collections has already been lost by a lack of effort and management, and scattered most of the collections. In particular, a one-off nature and volatility of theatrical performances make future generations to enjoy the performances and to study should consult the relevant records. Therefore, collecting records can be very serious mission. In this study, theatre collections of the country which aims to collect and analyze the characteristics and type of theatre collections. Based on this information, collection scope, targets, priorities, acquisition level, method of collecting are proposed the following. First, collection scope is defined for the theatre related collections which was performed nationwide in the 1900s, the times that modern theatre was begun. The object includes related information of planning, administration, drama (script), directing, stage design, public relations, production, evaluation, personal records, biographical data, group data and space data. Second, the theatre collections are divided into records and historical records. Priority of collections object is determined by the historical value and the theatre performed by the support of public organization. Third, the acquisition level is divided into archived, mirrored, web linked and database, which is proposed by the determined levels of mandatory, recommend and discretion according to the characteristic of performance. Fourth, acquisition methods are suggested by the general acquisition methods of transfer, donation and purchase as well as the methods of copy, production, legal deposit, entry and web link etc. The acquisition of theatre collections is executed on digital-based environment, and a centralized authority control should be establishmented. And through the development of network with theatre's stakeholders and the cooperation of related organizations, theatre collections acquisition is feasible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.36-46
• /
• 2019

The number of hosts connected to the Internet has increased dramatically, introducing the Domain Name System(DNS) in 1984. DNS is now an important key point for all users of the Internet by allowing them to use a convenient character address without memorizing a series of numbers of complex IP address. However, relative to the importance of DNS, there still exist many problems such as the authorization allocation issue, the disputes over public registration, security vulnerability such as DNS cache poisoning, DNS spoofing, man-in-the-middle attack, DNS amplification attack, and the need for many domain names in the age of hyper-connected networks. In this paper, to effectively improve these problems of existing DNS, we proposed a method of implementing DNS using distributed ledger technology, blockchain, and implemented using a Ethereum-based platform. In addition, the qualitative analysis performance comparative evaluation of the existing domain name registration and domain name server was conducted, and conducted security assessments on the proposed system to improve security problem of existing DNS. In conclusion, it was shown that DNS services could be provided high security and high efficiently using blockchain.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.62-73
• /
• 2022

As the competition among the autonomous vehicle (AV, here after) developers are getting fierce, Korean government has been supporting developers by deregulating safety standards and providing financial subsidies. Recently, some OEMs announced their plans to market Lv3 and Lv4 automated driving systems. However, these market changes raised concern among public road management sectors for monitoring road conditions and alleviating hazardous conditions for AVs and human drivers. In this regards, the authors proposed a methodology for monitoring road infrastructure to identify hazardous factors for AVs and categorizing the hazards based on their level of impact. To evaluate the degrees of the harm on AVs, the authors suggested a methodology for managing road hazard factors based on vehicle performance features including vehicle body, sensors, and algorithms. Furthermore, they proposed a method providing AVs and road management authorities with potential risk information on road by delivering them on the monitoring map with node and link structure.

• Journal of Korea Water Resources Association
• /
• v.55 no.7
• /
• pp.545-556
• /
• 2022

It is recommended to use long-term hydrometeorological data for more than the service life of the hydraulic structures and water resource planning. For the purpose of expanding rainfall data, stochastic simulation models, such as Modified Bartlett-Lewis Rectangular Pulse (BLRP) and Neyman-Scott Rectangular Pulse (NSRP) models, have been widely used. The optimal parameters of the model can be estimated by repeatedly comparing the statistical moments defined through a combination of parameters of the probability distribution in the optimization context. However, parameter estimation using relatively small observed rainfall statistics corresponds to an ill-posed problem, leading to an increase in uncertainty in the parameter estimation process. In addition, as shown in previous studies, extreme values are underestimated because objective functions are typically defined by the first and second statistical moments (i.e., mean and variance). In this regard, this study estimated the parameters of the NSRP model using the objective function with the third moment and compared it with the existing approach based on the first and second moments in terms of estimation of extreme rainfall. It was found that the first and second moments did not show a significant difference depending on whether or not the skewness was considered in the objective function. However, the proposed model showed significantly improved performance in terms of estimation of design rainfalls.