• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.5
• /
• pp.84-89
• /
• 2016

THPP(Titanium Hydride Potassium Perchlorate) is an igniter composed of potassium perchlorate as oxidizing agent and titanium hydride as fuel with a Viton binder. THPP is commonly found in the aerospace, defence and automotive industries. This research is investigeted for the manufacturing process and characteristics analysis of the THPP such as the performance and shape/calorimetry/pressure characteristics of the THPP on PMD(Pyrotechnic Mechanical Device). Also, THPP composite ratio is designed by CEA program.

• Explosives and Blasting
• /
• v.18 no.1
• /
• pp.53-58
• /
• 2000

Thermal analysis, analysis of combustion residue and combustion characteristics measure ment such as burning rate or temperature were carried out to clarify the combustion mechanism of a tungsten- potassium perchlorate-barium chromate chromate delay powder. The results obtained are as follows. The main reaction of the delay powder of tungsten-potassium perchlorate-barium chromate is the oxidation of tungsten by potassium perchlorate. Barium chromate acts as a burning rate modifier, and the smaller the larger is the burning rate. Three types of delay composition used in this study show characteristic burning behavior. A stoichiomertric or a oxidizer-rich composition has a small linear burning rate. although it is has a large heat of combustion. On the other hand, a tungsten-excess or a fuel-rich composition with a small heat of combustion has a larger linear burning rate than the former, showing a small fractional oxidation of tungeten (below 10%) contained in the delay powder. From these results, a surface combustion mechanism is proposed for the combustion mechanism of this delay powder.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.8-13
• /
• 2018

Zirconium potassium perchlorate(ZPP) is an igniter composed of potassium perchlorate as an oxidizing agent and zirconium as a fuel with a Viton binder. ZPP has been used to provide an ignition source in the aerospace, propulsion, and automotive industries. This study investigates the manufacturing process and characteristics of ZPP, such performance and shape/calorimetry/pressure characteristics with respect to pyrotechnic mechanical device(PMD). During the production of ZPP, the mixing process was designed to produce uniform particle size and shape by mixing the raw materials at high speed.

• Journal of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.119-122
• /
• 1970

In those six kinds of diamine salt crystal of which their structures had already been determined up to date, commonly one molecule of diamine and two molecules of acid were combined; although the crystal of benzidine perchlorate, only one molecule each of benzidine and perchloric acid were combined. At the case of benzidine perchlorate, one molecule acts as the role of two molecules by coincidence of the center of symmetry point of both the lattice and molecule, and perchlorate ion is locating symmetrically between two -$NH_2$ groups of different benzidine molecule, therefore benzidine and acid could be combined together with 1:1 by mole ratio. When forming the salt with diamine and acid, the combining mole ratio would be determined in accordance with the relationship between the symmetry element that presented by the space group and the symmetry element of diamine salt melecule.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.445-450
• /
• 2017

ZPP(Zirconium Potassium Perchlorate) is an igniter composed of potassium perchlorate as oxidizing agent and zirconium as fuel with a Viton binder. ZPP is used to provide ignition in the aerospace, propulsion, automotive industries. This research is investigated for the manufacturing process and characteristics analysis of the ZPP such as the performance and shape/calorimetry/pressure characteristics of the ZPP on PMD(Pyrotechnic Mechanical Device). During the production of ZPP, the mixing process was designed so that the ZPP could be produced in uniform particle size and shape by mixing the raw materials at high speed.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.177-183
• /
• 1998

By the reactions of a $C_{2}$-chiral ligand, (+)-11S,12S-bis[2,2'-(diphenylphosphino)benzanilido]-9,10-dihydro-9,10-ethanoanthracene(6) with $[\pi-allyl chloroplatinum(II)]_4$, and $CpCo(CO)_2$ respectively, three new complexes, ($\pi$-allyl)platinum(II)(+)-11S,12S-bis[2,2'-(diphenylphosphino)benzanilido]-9,10-dihydro-9,10-ethanoanthracene perchlorate(1), ($\pi$-allyl)platinum(II)(+)-11S,12S-bis[2,2'-(diphenylphosphino)benzanilido]-9,10-dihydro-9,10-ethanoanthracene chloride(2), ($\eta^5$-cyclopentadienyl)cobalt(I)-(+)-11S,12S-bis[2,2'-(diphenylphosphino)benzanilido]-9,10-dihydro-9,10-ethanoanthracene(3) were prepared. $\eta^3$-Cyclohexenyl)palladium(II)1,2-bis(diphenylphosphino)ethane perchlorate(4) was obtained by the reaction of ($\eta^3$-cyclohexenyl)palladium(II) chloride dimer with a symmetric ligand, 1,2-bis(diphenylphosphino)ethane and lithium perchlorate. These complexes were identified by NMR-, IR-, and Mass-Spectrophotometers and elemental analyzer.

• Analytical Science and Technology
• /
• v.25 no.6
• /
• pp.435-440
• /
• 2012

A liquid chromatography-electrospray ionization-tandem mass spectrometry method (LC-ESI-MS/MS) was used for determining perchlorate in the Gum-River surface water. Sample was directly injected into LC-ESI-MS/MS after the filtrations using PTFE filter paper. The coefficient of variation of perchlorate was less than 3% and the limit of quantification was 0.17 ${\mu}g/L$. Water samples were collected from thirty-five basins of Gum-River on February, April and June 2012, respectively. As a result, perchlorate was detected in the concentration range of 0.23-3.73 ${\mu}g/L$ (mean 0.20 ${\mu}g/L$) in the frequency of 15% in general surface water and in the concentration range of 0.36-25.10 ${\mu}g/L$ (mean 1.69 ${\mu}g/L$) in the frequency of 36% in surface water samples near industry area.

• Analytical Science and Technology
• /
• v.23 no.5
• /
• pp.429-436
• /
• 2010

The present research evaluates the efficiency of mixed resins between anion exchange resin and active carbon. We expected synergic effect from advantages of both adsorbents. Especially, this research focused on the removal of high cencentrated perchlorate ion from demilitarization solution. The total amount of the adsorbed perchlorate ion is increased considerably with mixed resins between mono functional anion exchange resin and granular active carbon from a single adsorbent. Results demonstated that this process not only improve the efficiency of adsorbing perchlorate, but save the time, space and cost for treating perchlotrate waste solution, because of reducing organic contaminant removing process. The interference effects from coexisting anions are not significant and can successfully applied to real demilitarization sample.

• Journal of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.383-389
• /
• 1981

Thianthrene cation radical perchlorate reacts with N-arylsulfonamides such as p-toluenesulfonanilide, benzenesulfonanilide, N-(2-methylphenyl)benzenesulfonamide, and N-phenyl-p-toluenesulfonanilide to give 5-(p-N-p-toluenesulfonamidophenyl)-(1a), 5-(p-N-benzenesulfonamidophenyl)-(1b), 5-(4-N-benzenesulfonamido-3-methylphenyl)-(1c), and 5-(p-N-phenyl-N-p-toluenesulfonamidophenyl thianthrenium perchlorate (1d), respectively. In the meantime, 1d reacts further with thiathrene cation ratical to form diperchlorate(1e). The structure of 1a~1e is very similar to 5-(p-acetamidophenyl) thianthrenium perchlorate which has been obtained from the reaction with acetanilide. However, the discrepancy in the stoichiometry between two reactions indicates that the reaction with sulfonamide appears not to proceed with a single mechanism.

• Membrane Journal
• /
• v.9 no.4
• /
• pp.230-239
• /
• 1999

Perchlorate ion-selective electrodes in PVC membranes that respond linearly to concentration 106 M were developed by incorporating the quaternary phosphonium salts as a canier. The effects of the chemical structure, the contents of canier, the kind of plasticizer and the membrane thickness on electrode characteristics such as the electrode slope, the linear respone range and the detection limit were studied. With this results, the detectable pH range, selectivity coefficients and AC impedance characteristics were compared and investigated. The perchlorate ion substituents of the quaternary phosphonium salts like tetraoctylphosphonium perchlorate (TOPP) , tetraphenylphosphonium perchlorate(TPPP), and tetrabutylphosphonium perchlorate(TBPP) as a canier were used. The electrode characteristics were better in the ascending order of TBPP < TPPP < TOPP, with the increase of carbon chain length of the alkyl group. Dioctylsebacate(OOS) was best as a plasticizer, the canier contents were better with 11.76 wt% and the optimum membrane thickness was 0.19 mm. Under the above condition, the electrode slope was 56.58 mV/$^P{ClO}_4$,the linear response range was $10^{-1}$\times$10^{-6}$ M, the detection limit was 9.66 x $10^{-7}$ M. The performance of electrode was better than Orion electrode. The electrode potential was stable within the pH range from 3 to 11. The order of the selectivity coefficients for the perchlorate ion was sol < F < Br < 1. With the result of impedance spectrum, it was found that the equivalent circuit for the electrode could be expressed by a series combination of solution resistance, parallel circuit consisting of the double layer capacitance and bulk resistance and Warburg impedance. And solution resistance was almost not appeared and Warburg impedance was highly appeared by diffusion. Then Warburg coefficient was 1.32$\times$$10^74 $\Omega$ $\cdot$ ${cm}^2/s^{1/2}$.