• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.901-910
• /
• 2003

Using the G-, C-, and NOR-banding techniques, a karyotyping for Korean Native Pig was performed. Blood samples were collected from 50 male Korean Native Pigs that had been bred at the National Livestock Research Institute and then blood cells were prepared from in vitro cultures followed by karyotyping; G-, C-, and NOR-banding patterns of metaphase chromosomes were analyzed. The karyotype of Korean Native Pig is 38, XX or XY which consists of 5 pairs of submetacentric chromosomes(Group I), 2 pairs of acrocentric chromosomes with short p-arm(Group II), 5 pairs of medium metacentric chromosomes(Group III), 6 pairs of acrocentric chromosomes(Group IV) and metacentric X and Y sex chromosomes. On GTG-banding, the Korean Native Pig exhibited a typical and identical banding pattern in each homologous chromosomes. Overall chromosomal morphology and positions of typical landmarks of the Korean Native Pig were virtually identical to those of Committee for the Standardized Karyotype of the Domestic Pig(CSKDP). However, numbers of G-bands of the Korean Native Pig chromosomes were more than those of CSKDP. In chromosomes 1, 3, 5, 6, 7, 8, 13, 14, 15, 16, 17, 18 and X, the Korean Native Pig exhibited more separated bands as compared with CSKDP. In C-banding patterns, although the quantity of heterochromatin was variable in each chromosome, most of the Korean Native Pig chromosomes had heterochromatic C-bands on centromeres. However, the heterochromatic C-band was constantly observed on the whole Y chromosome. In AgNOR staining, the NORs were located at centromeres on the chromosomes 8 and 10. The number of NORs per metaphase ranged from 2 to 4 giving a mean value of 2.13. The number of NORs were distributed on all chromosome pair 10 but not on chromosome 8. The sizes of NORs were also differed between homologous chromosomes 8. Numbers of NORs of Korean Native Pig were significantly higher than those of Yorkshire. The pattern of pig NORs was polymorphic in breeds, individuals and cells, especially on chromosome 8.

• Journal of Animal Science and Technology
• /
• v.49 no.5
• /
• pp.647-656
• /
• 2007

In order to investigate the effects of supplemental ionic surfactants in in vitro ruminal fermentation, N-Lauroylsarcosine sodium salt(N-LSS) and sodium dodecyl sulfate(SDS) for negative(－) ionic surfactant, and hexadecylpyridinium chloride monohydrate(HPCM) and hexadecyltrimethyl ammonium bromide(HTAB) for positive (+) ionic surfactant were supplemented by 0.05% and 0.1% into the Dehority’s artificial medium containing rice straw(1mm) as a substrate. In vitro DM digestibility, the growth of rumen mixed microbes, pH, cumulative gas production and SEM(Scanning Electron Microscopy) observation of microbial attachment on rice straw particle were investigated through the experiment composing 9 treatments (two supplemental levels of two positive ionic(+) surfactant, two supplemental levels of two negative(－) ionic surfactant) including the control. The sample collection was at 6, 12, 24, 48 and 72 h post fermentation with 3 replications per treatments. DM digestibility in treatments supplemented (+) or (－) surfactants almost stopped afterward 12 h fermentation, in vitro DM digestibility at 72 h post fermentation in the ionic surfactants was at half level of that of the control(P<0.05). Accumulative gas production in in vitro was less(P<0.05) with addition of ionic surfactants compared to the control. The amount of rumen mixed microbes recovered from in vitro incubation fluid pleateaued at 12 h post fermentation for the positive (+) ionic surfactants, but steadily increased as fermentation time elapsed for the control. Rumen microbial growth rate was significantly(P<0.05) low in the negative(－) ionic surfactant compared to the control. pH of the incubation fluid was ranged from 6.02 to 7.20, and was the highest in the negative(－) ionic surfactants, and was the lowest in the control(P<0.05). In SEM observation, rumen microbial population attached on rice straw particle was less with addition of ionic surfactants than the control. In conclusion we could not found any positive effects of negative- and positive- charged surfactants on rumunal fermentation characteristics and rumen microbial growth rates.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.6
• /
• pp.823-829
• /
• 2016

Eight Holstein steers ($216{\pm}48kg$ body weight) fitted with ruminal and duodenal cannulas were used to evaluate effects of wheat straw processing (ground vs pelleted) at two straw inclusion rates (7% and 14%; dry matter basis) in dry rolled or steam-flaked corn-based finishing diets on characteristics of digestion. The experimental design was a split plot consisting of two simultaneous $4{\times}4$ Latin squares. Increasing straw level reduced ruminal (p<0.01) and total tract (p = 0.03) organic matter (OM) digestion. As expected, increasing wheat straw level from 7% to 14% decreased (p<0.05) ruminal and total tract digestion of OM. Digestion of neutral detergent fiber (NDF) and starch, per se, were not affected (p>0.10) by wheat straw level. Likewise, straw level did not influence ruminal acetate and propionate molar proportions or estimated methane production (p>0.10). Pelleting straw did not affect ($p{\geq}0.48$) ruminal digestion of OM, NDF, and starch, or microbial efficiency. Ruminal feed N digestion was greater (7.4%; p = 0.02) for ground than for pelleted wheat straw diets. Although ruminal starch digestion was not affected by straw processing, post-ruminal (p<0.01), and total-tract starch (p = 0.05) digestion were greater for ground than for pelleted wheat straw diets, resulting in a tendency for increased post-ruminal (p = 0.06) and total tract (p = 0.07) OM digestion. Pelleting wheat straw decreased (p<0.01) ruminal pH, although ruminal volatile fatty acids (VFA) concentration and estimated methane were not affected ($p{\geq}0.27$). Ruminal digestion of OM and starch, and post-ruminal and total tract digestion of OM, starch and N were greater (p<0.01) for steam-flaked than for dry rolled corn-based diets. Ruminal NDF digestion was greater (p = 0.02) for dry rolled than for steam-flaked corn, although total tract NDF digestion was unaffected (p = 0.94). Ruminal microbial efficiency and ruminal degradation of feed N were not affected (p>0.14) by corn processing. However, microbial N flow to the small intestine and ruminal N efficiency (non-ammonia N flow to the small intestine/N intake) were greater (p<0.01) for steam-flaked than for dry rolled corn-based diets. Ruminal pH and total VFA concentration were not affected ($p{\geq}0.16$) by corn processing method. Compared with dry rolled corn, steam-flaked corn-based diets resulted in decreased acetate:propionate molar ratio (p = 0.02). It is concluded that at 7% or 14% straw inclusion rate, changes in physical characteristics of wheat straw brought about by pelleting negatively impact OM digestion of both steam-flaked and dry-rolled corn-based finishing diets. This effect is due to decreased post-ruminal starch digestion. Replacement of ground straw with pelleted straw also may decrease ruminal pH.

• Korean Journal of Poultry Science
• /
• v.36 no.1
• /
• pp.15-21
• /
• 2009

A 10-wk layer feeding trial was conducted to investigate the effects of high quality corn distiller's dried grains with solubles (DDGS) on performance, egg qualities, and yolk fatty acid composition. The economics of using DDGS in the Korean situation was also analyzed. A total of 216 Hy-line Brown layers, 23-wk of age, were employed in this trial consisting of three dietary treatments (0%, 10%, and 20% DDGS), and six replicates per treatment. All experimental diets were prepared as iso-protein (17%) and iso-calorie (2,780 kcal/kg). The use of DDGS up to 20% in layer diets did not affect the feed intake, laying rate, egg weight, and feed conversion ratio (P>0.05). At 5th and 10th wk of the trial, the eggshell color, albumen height, and Haugh unit were not influenced by the DDGS supplementation. At 5th wk of the trial, the eggshell qualities, like eggshell weight, eggshell thickness, and eggshell strength, were not affected by the DDGS feeding; however, these eggshell qualities were decreased at 10th wk due to the 20% DDGS feeding (P<0.05). Yolk color of DDGS 20% increased compared to DDGS 0% at 5th and 10th wk of the trial (P<0.05). At 10th wk, yolk/egg ratio of DDGS 20% decreased compared to DDGS 0% (P<0.05). The yolk fat content was not changed due to DDGS feeding. The monounsaturated fatty acid content of yolk decreased linearly by feeding DDGS (P<0.05). The yolk polyunsaturated fatty acid content of DDGS 20% increased significantly compared to DDGS 0%. The DDGS feeding was not found to affect the degree of yolk fat unsaturation. The cost of feed (￦/kg feed) decreased as the level of DDGS increased. The production costs of egg (￦/kg egg) were cheap in the order of DDGS 10%, DDGS 20%, and DDGS 0%, indicating that DDGS is a viable alternative feed ingredient to corn and soybean meal. In conclusion, high quality DDGS ($L^*$ 61.72) could be used economically up to 20% level without any harmful effect on laying performance: however, the use of DDGS up to 10% is more economical than DDGS 20%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.142-149
• /
• 1995

This study was conducted to investigate the relationships between yearly variation of climatic components and yearly variations of productivity in monoculture cotton. In addition, correlation coefficients among yield and yield components were estimated. The data of yield and yield components from the four varieties(Kinggus, Yongdang local. 113-4, 380) were collected from 1978 to 1992 in Mokpo area. The meteorological data gathered at the Mokpo Weather Station for the same period were used to find out the relationships between climatic components and productivity. Yearly variation of the amount of precipitation and number of stormy days in July are large with coefficients of the variations(C.V)84.89 and 97.05%, respectively, while yearly variation, of the average temperature, maximum temperature, minimum temperature from May to Sep. are relatively small. Seed cotton yield before frost in Sep. and Oct. very greatly with C.V. of 68.77, 78.52%, respectively. Number of boll bearing branches and lint percentage show more or less small in C.V. with 11.77 and 19.13%, respectively and flowering date and boll opening date show still less variation. Correlation coefficients between precipitation in May and number of boll bearing branches, duration of sunshine in July and number of bolls per plant, maximum temperature in July and total seed cotton before the frost in Sep., Oct., and Nov. evaporation in Aug. are positively sig-nificant at the 1% level. There are highly significantly positive correlated relationships among yield(total seed cotton) and yield components. Total seed cotton yield(Y) can be predicted by multiple regression equation with independent variables of climatic factors in July such as monthly averages of average temperature($X_1$), maximum temperature($X_2$) and minimum temperature($X_3$), monthly amount of precipitation ($X_4$), evaporation($X_5$), monthly average of relative humidity($X_6$), monthly hours with sunshine($X_7$) and number of rainy days($X_8$). The equation is estimatedas Y =-1080.8515 + 144.7133$X_1$+15.8722$X_2$ + 164.9367$X_3$ + 0.0802$X_4$ + 0.5932$X_5$ + 11.3373$X_6$ + 3.4683$X_7$- 9.0846$X_8$. Also, total seed cotton yield(Y) can be predicted by the same method with climatic components in Aug., Y =2835.2497 + 57.9134$X_1$ - 46.9055$X_2$ - 41.5886X$_3$ + 1.2559$X_5$ - 21.9687$X_6$ - 3.3763$X_7$- 4.1080$X_8$- 17.5586$X_9$. And the error between observed and theoretical yield were less with approached linear regression.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.85-92
• /
• 2005

The performance of a novel fermentation process, adopting a sludge blanket type configuration for higher hydrolysis/acidogenesis of the municipal primary sludge, was investigated under batch and semi-continuous conditions with various pH and temperature conditions. This acid elutriation slurry reactor provided higher system performance with a short HRT (5 days) and higher acidogenic effluent quality under pH 9 and thermophilic ($55^{\circ}C$) conditions. The hydrolysis of the sludge was revealed to be significantly dependent on seasonal effects for sludge characteristics but with little impact on acidogenesis. Based on the rainy season at the optimum conditions, VFA production and recovery fraction ($VFA_{COD}/COD$) were $0.18\;g\;VFA_{COD}\;g^{-1}\;VSS_{COD}$ and 63%. As byproducts, nitrogen and phosphorus releasing were $0.006\;g\;N\;g^{-1}\;VSS_{COD}$ and $0.003\;g\;P\;g^{-1}\;VSS_{COD}$, respectively. For the mass balance in a full-scale plant($Q=158,880\;m^3\;day^{-1}$) based on the rainy season, the VFA and non-VFA(as COD) production were $3,110\;kg\;VFA_{COD}\;day^{-1}$ and $1,800\;kg\;COD\;day^{-1}$, resulting in an increase of organics of $31\;mg\;COD\;L^{-1}$ and $20\;mg\;VFA_{COD}\;L^{-1}$ and nutrients of $0.7\;mg\;N\;L^{-1}$ and $0.3\;mg\;P\;L^{-1}$ in the influent sewage. The economical benefit from this process application was estimated to be about $67 per $1,000m^3$ of sewage except for energy requirements and also, better benefits can be expected during the dry season. Also, the results revealed that the process has various additional advantages such as pathogen-free stabilized solids production, excellent solids control and economical benefits.

• The korean journal of orthodontics
• /
• v.36 no.2 s.115
• /
• pp.145-152
• /
• 2006

The purpose of this study was to evaluate electroless plating as a method of increasing the diameter of an orthodontic wire in comparison with eletroplating. After pretreatment plating of the 0.016 inch stainless steel orthodontic wire, electroless plating was performed at $90^{\circ}C$ until the diameter of the wire was increased to 0.018 inch. During the process of electroless plating, the diameter of the wire was measured every 5 minutes to examine the increasing ratio of the wire's diameter per time unit. And to examine the uniformity, the diameter at 3 points on the electroless-plated orthodontic wire was measured. An X-ray diffraction test for analyzing the nature of the plated metal and a 3-point bending test for analyzing the physical property were performed. The electroless-plated wire group showed a increased tendency for stiffness, yield strength, and ultimate strength than the electroplated wire group. And there was a statistically significant difference between the two groups for stiffness and ultimate strength. In the electroless-plated wire group, the increasing ratio of the diameter was $0.00461{\pm}0.00003mm/5min$ (0.00092 mm/min). In the electroplated wire group, it was $0.00821{\pm}0.00015mm/min$. The results of the uniformity test showed a tendency for uniformity in both the plating methods. The results of this study suggest that electroless plating of the wire is closer to the ready-made wire than electroplating wire in terms of the physical property. However, the length of plating time needs further consideration for the clinical application of electroless plating.

• Korean Journal of Community Nutrition
• /
• v.10 no.5
• /
• pp.677-692
• /
• 2005

The assessment of sodium intake is complex because of the variety and nature of dietary sodium. This study intended to develop a dish frequency questionnaire (DFQ) for estimating the habitual sodium intake and a short DFQ for screening subjects with high or low sodium intake. For DFQ112, one hundred and twelve dish items were selected based on the information of sodium content of the one serving size and consumption frequency. Frequency of consumption was determined through nine categories ranging from more than 3 times a day to almost never to indicate how often the specified amount of each food item was consumed during the past 6 months. One hundred seventy one adults (male: 78, female: 93) who visited hypertension or health examination clinic participated in the validation study. DFQ55 was developed from DFQ112 by omitting the food items not frequently consumed, selecting the dish items that showed higher sodium content per one portion size and higher consumption frequency. To develop a short DFQs for classifying subjects with low or high sodium intakes, the weighed score according to the sodium content of one protion size was given to each dish item of DFQ25 or DFQ14 and multiplied with the consumption frequency score. A sum index of all the dish items was formed and called sodium index (Na index). For validation study the DFQ112, 2-day diet record and one 24-hour urine collection were analyzed to estimate sodium intakes. The sodium intakes estimated with DFQ112 and 24-h urine analysis showed $65\%$ agreement to be classified into the same quartile and showed significant correlation (r=0.563 p<0.05). However, the actual amount of sodium intake estimated with DFQ112 (male: 6221.9mg, female: 6127.6mg) showed substantial difference with that of 24-h urine analysis (male: 4556.9mg, female: 5107.4mg). The sodium intake estimated with DFQ55 (male: 4848.5mg, female: 4884.3mg) showed small difference from that estimated with 24-h urine analysis, higher proportion to be classfied into the same quartile and higher correlation with the sodium intakes estimated with 24-h urine analysis and systolic blood pressure. It seems DFQ55 can be used as a tool for quantitative estimation of sodium intake. Na index25 or Na index14 showed $39\~50\%$ agreement to be classified into the same quartile, substantial correlations with the sodium intake estimated with DFQ55 and significant correlations with the sodium intake estimated with 24-h urine analysis. When point 119 for Na index25 was used as a criterion of low sodium intake, sensitivity, specificity and positive predictive value was $62.5\%,\;81.8\%\;and\;53.2\%$, respectively. When point 102 for Na index14 was used as a criterion of high sodium intake, sensitivity, specificity and positive predictive value were $73.8\%,\;84.0\%,\;62.0\%$, respectively. It seems the short DFQs using Na index 14 or Na index25 are simple, easy and proper instruments to classify the low or high sodium intake group.

• Horticultural Science & Technology
• /
• v.34 no.2
• /
• pp.249-256
• /
• 2016

This study was performed to investigate the effect of various concentrations of Diniconazole (DC) on the growth and quality of grafted tomato (Solanum lycopersicum) seedlings cultivated during the summer season. Concentrations of DC were set to 0 (non-treatment), 5, 10 and $20mg{\cdot}L^{-1}$, were treated once 3 days after grafting. Rootstock of the seedlings was shorter in the DC $5mg{\cdot}L^{-1}$ and $10mg{\cdot}L^{-1}$ treatment compared to the non-treatment, and the scions were significantly shorter in the DC $20mg{\cdot}L^{-1}$ treatment. Seedlings were significantly shorter in the DC $20mg{\cdot}L^{-1}$ treatment compared with the non-treatment. Leaf area was lower for seedlings subjected to all treatments than for seedlings in non-treatment group, and reduction was dose dependent. In particular, the DC $20mg{\cdot}L^{-1}$ treatment inhibited both leaf and stem growth. The fresh weighs of leaves and stems of the seedlings treated with DC $5mg{\cdot}L^{-1}$ and the fresh weights of roots subjected to all treatments were significantly greater than those of the non-treatment seedlings. Dry weight per organs of the seedlings treated with DC $5mg{\cdot}L^{-1}$ was significantly greater that of the non-treatment seedlings, but the dry weight of leaves of seedling treated with DC $20mg{\cdot}L^{-1}$ was much less than that of the non-treatment seedlings. The T/R ratio of the seedlings was lower for all treatments than for the non-treatment. The relative growth rate of the seedlings was significantly lower in the DC $20mg{\cdot}L^{-1}$ treatment and, the leaf area rate of seedlings was lower in the DC $5mg{\cdot}L^{-1}$ and $10mg{\cdot}L^{-1}$ treatment than in the non-treatment. Therefore, the optimal concentration of Dinoconazole used to produce a suitable grafted tomato seedling in the summer season is $10mg{\cdot}L^{-1}$ or less.

• Journal of Food Hygiene and Safety
• /
• v.28 no.3
• /
• pp.279-285
• /
• 2013

To establish sample preparation method for detection of food-borne pathogens from lettuce, perilla leaves, cucumber, pepper, and cherry tomato, the influences of diluent composition, processing time, and proportion of diluent to sample were examined. Each produce was inoculated with 6.0 log $CFU/cm^2$ of Escherichia coli O157:H7, Salmonella Typhimurium, Listeria monocytogenes, Staphylococcus aureus, and Bacillus cereus. Each produce was treated with 0.1% peptone water, and D/E neutralizing broth. Processing time of produce was 30, 60, 90, and 120s, and the proportion of diluent to sample was 2 : 1, 4 : 1, 9 : 1, and 19 : 1. The number of bacteria after treatment of D/E neutralizing broth was higher than that of 0.1% peptone water (P<0.05). In cherry tomato, the population of S. typhimurium recovered from treated with D/E broth was higher than that recovered from treated with 0.1% peptone water by 1.05 log $CFU/cm^2$ (P<0.05). No difference in numbers of pathogens was observed in processing time. Optimum proportion of diluent to perilla leaf, iceberg lettuce, cucumber, green pepper, and tomato was 9 : 1, 4 : 1, 2 : 1, 2 : 1, and 2 : 1, respectively. These data suggest that D/E neutralizing broth should be recommend as diluent, and the diluent volume applied to produce should be determined in proportion to produce surface area per weight (g).