• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.113-120
• /
• 2005

In order to investigate the characteristics of penatration and the effect of surface treatment in A15052-H34, Al5082-Hl31 and titanium alloy laminates which were treated by anodizing and PVD(Physical Vapor Desposition) method, ballistic tests were conducted. Thickness of surface membrane in A15052-H34, Al5082-Hl31, were $25{\mu}m$ and that of titanium $0.9{\mu}m$ respectively. Surface hardness test was conducted using micro Vicker's hardness tester. Resistance to penetration is determined by the protection ballistic limit(V50), a statistical velocity with $50\%$ probability for complete penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are observed from the results of V50 test and Projectile Through Plate(PTP) test at velocities greater than protection ballistic limit, respectively. Present experimental results derived from this research help to optimize laminate impact behavior by varing the laminate thickness and surface treated materials.

• 콘크리트학회논문집
• /
• 제16권4호
• /
• pp.485-492
• /
• 2004

본 논문에서는 콘크리트의 염소이온에 대한 저항성을 평가하기 위한 대표적인 전기적 촉진시험인 ASTM C 1202 방법을 혼화재를 사용한 콘크리트에 적용하면 콘크리트내의 $OH^-$ 농도의 저하에 따른 영향으로 통과전하량을 낮게 평가할 수 있다는 문제점을 지적하고 이에 해결방안으로 증류수를 사용하는 보정방법을 검토하였다. 실험결과 보정방법 사용시 $OH^-$ 이온과 온도상승에 의한 영향을 배제시킬 수 있었고 NaCl 용액에 장기침지실험을 통해 구한 염화물 확산계수와의 비교시 ASTM C 1202 방법보다 상관성이 높게 나타나 혼화재를 사용한 콘크리트의 염소이온 침투저항성을 보다 정확하게 평가할 수 있는 방법이라 사료된다.

• 한국건축시공학회지
• /
• 제11권2호
• /
• pp.189-199
• /
• 2011

도심지 환경 개선을 위한 인공지반녹화(옥상녹화 등)사업의 확대 보급을 위해서는 옥상부 구조체의 장기적 안정성을 보증할 수 있는 안전한 방수방근층을 구성하여야한다. 따라서 인공지반 녹화용 방수방근층은 식물 뿌리의 침입으로부터 안전해야 하며, 녹화부의 잔류수 및 침체수 등에 대해 장기적으로 수밀해야 하며, 식물 성장에 필요한 비료 등의 화학물질 및 기타의 화학성분에 장기적으로 안전해야 하며, 시공 시에 발생하는 각종 공구류, 설비류, 가설물에 의해 손상되지 않아야 하고, 식재 및 토심의 하중, 설비류의 하중에 의해 손상되지 않는 종합적 성능이 요구된다. 이에 본 연구에서는 옥상녹화 현장의 환경 조건을 대상으로 방수방근층의 환경 성능 지표를 설정하였고, 이와 관련한 방근성능, 수밀성능, 내움패임 저항성능, 충격저항성능, 내화학성능을 방수방근층의 요구 성능으로 정하였으며, 그와 관련한 평가 방법을 제시하고, 실무적인 검증 시험을 통하여 복합 방수방근층의 성능 평가 시스템을 제안하였다.

• 한국지반공학회논문집
• /
• 제22권10호
• /
• pp.55-67
• /
• 2006

IGM(Intermediate Geomaterial)에 근입된 현장타설말뚝의 설계를 수행하기 위해서는 대상 지반의 강도특성을 알아야 하고, 이를 위해 IGM에 대한 일축이나 삼축 등의 압축강도시험을 수행한다. 그러나, 설계 대상의 IGM지반이 풍화가 된 경우에는 압축강도시험을 통한 강도특성 파악이 힘들다. 이러한 경우에는 압축강도시험을 대체하여 IGM지반의 강도 특성을 파악할 수 있는 방법들이 필요로 한다. 본 연구에서는 현재 텍사스주 도로국(Texas Department of Transportation)에서 말뚝기초의 설계인자로서 사용 중인 텍사스 콘 관입시험(Texas Cone Penetrometer Test)을 이용하여 IGM지반의 역학특성을 파악하였다. 그리고 미국의 텍사스주 지역에 분포하는 IGM지반인 셰일(Clay Shale)과 석회암(Limestone)을 대상으로 시험현장을 선택하였고 말뚝재하시험과 텍사스 콘 관입시험을 수행하였다. 본 연구결과를 바탕으로 텍사스 콘 관입시험과 IGM 근입 현장타설말뚝의 주면마찰력과 선단지지력과의 상관관계를 제시하였다.

• Structural Engineering and Mechanics
• /
• 제47권5호
• /
• pp.701-711
• /
• 2013

People started to replace natural aggregate with recycled aggregate for a number of years due to disposal problem and certain other potential benefits. Though there are number of drawbacks with use of recycled aggregates like lesser modulus of elasticity, low compressive strength, increase in shrinkage, there are results of earlier studies that use of chemical and mineral admixtures improves the strength and durability of recycled concrete. The use of recycled aggregate from construction and demolition wastes is showing prospective application in construction as alternative to natural aggregates. It conserves lot of natural resources and reduces the space required for the landfill disposal. In the present research work, the effect of recycled aggregate on strength and durability aspects of concrete is studied. Grade of concrete chosen for the present work is M50 (with a characteristic compressive strength of 50 MPa). The recycled aggregates were collected from demolished structure with 20 years of age. Natural Aggregate (NA) was replaced with Recycled Aggregate (RA) in different percentages such as 25, 50 and 100 to understand its effect. The experiments were conducted for different ages of concrete such as 7, 14, 28, 56 days to assess the compressive and tensile strength. Durability characteristics of recycled aggregate concrete were studied with Rapid chloride penetration test (as per ASTMC1202), sorptivity test and acid test to assess resistance against chloride ion penetration, capillary suction and chemical attack respectively. Mix design for 50 MPa gives around 35 MPa after replacing natural aggregate with recycled aggregate in concrete mix and the chloride penetration range also lies in moderate limit. Hence it is understood from the results that replacement of NA with RA is very much possible and will be ecofriendly.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.269-281
• /
• 2010

The cone penetration test(CPT) has been increasingly used for in situ site characterization. However, the use of CPT is often limited due to specific site conditions depending on the cone size, geometry, and capacity of the CPT system used. In South Korea, it has generally been considered that the CPT could be satisfactorily performed only in soft soils. Louisiana State University/ Louisiana Transportation Research Center has implemented a field-rugged continuous intrusion miniature cone penetration test (CIMCPT) system since the 1990s. The miniature cone penetrometer of the CIMCPT system has a cross-sectional cone area of $2cm^2$ allowing finer soil profiles compared to the standard $10cm^2$. The reduced cross-sectional area also enables a system capacity reduction leading to cost saving and ease in maintenance. In addition, the continuous intrusion mechanism allows fast and economic site investigations. Samsung C&T Corporation has recently implemented a similar CIMCPT system. In this study, case studies on the field application of Samsung CIMCPT system for the last 2 years are presented to illustrate its performance investigation and its usefulness and limitation. Results of the case studies show that the CIMCPT system can be applied to soils with cone tip resistance($q_c$) values up to about 30MPa and allows a reliable and useful way to characterize soft soils. The results also show that the rod buckling limits the investigation depth by the system and the large contact pressure of the CIMCPT truck prevents the use of the system at sites with soft surface soils. According to the results of the case studies, the Samsung CIMCPT system has been being upgraded with a miniature cone with a longer rod, a crawler-type transportation system, a pre-boring system, and so on.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.301-302
• /
• 2023

In this study, we aimed to identify changes in fire resistance according to the type of sleeves used for pipe penetrations and to examine their accreditation of fire resistance performance and use them as basic data. The test results of fire resistance according to the type of sleeve used in non-metallic pipe facilities showed that the temperature on the support side was higher for sleeves with higher thermal conductivity. For the temperature on the surface of the pipes, in the case of galvanized steel plates, steel pipes, and structures without sleeves, the highest temperature was observed after the expansion of the firestop material for 46 to 53 minutes and then decreased. PVC sleeves showed a steady increase in temperature until 53 minutes, after which the temperature did not increase further. In addition, for non-metallic pipes, the effect of the type of sleeve on fire resistance is considered to be insignificant because the lower part (heating direction of the furnace) under the support structure is cut off to block the heat during the two-hour fire resistance test.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.141-142
• /
• 2002

In this paper, we propose a slurry jet (water containing $1\;{\mu}m$ alumina particles) impact test in order to quickly evaluate the wear properties of physical vapor deposited (PVD) coatings on commercial cutting tools. Linear wear was obtained for bothe coating and substrate material, and the penetration through the coating into the substrate was signified by a sharp increase in slope of the wear versus time curve. The PVD coatings deposited on the tools showed the same wear rates as those on reference plate specimens produced by the same coating methods. We conclude that our proposed evaluation technique for coatings is considerably useful as a screening test when evaluating coated tools like twist drills, taps, end mills, gear hobs, etc.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 연약지반처리위원회 학술세미나
• /
• pp.59-70
• /
• 2000

본 연구에서는 콘관입속도가 콘관입시험 결과에 미치는 영향을 연구하기 위하여 LSU/CALCHAS(Louisiana State University Calibration Chamber System)를 이용한 미니 Piezocone의 관입시험이 수행되었으며 그 결과를 비교 분석하였다. 10회의 미니 Piezocone 관입시험이 Ko 조건에서 수행되었으며 33% kaolin, 67% sand mixture가 시료로 사용되었고, 콘관입속도 0.3, 0.6cm/sec, U1(filter element at the cone tip), U2(filter element above the cone base), OCR=1, 10 의 조건이 다양하게 적용되었다. 시험결과 Cone Resistance, Excess Pore Water Pressure, Sleeve Friction 은 U1, U2 두 종류의 콘에 대해서 모두 관입속도가 커짐에 따라 증가하였으나 OCR의 증가에 따라서는 감소하였으며 U1의 Excess Pore Water Pressure가 U2 경우보다 크게 측정되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.357-358
• /
• 2010

본 연구는 인공해수촉진열화시험에 의한 해양콘크리트의 내염특성 규명을 위한 연구의 일환으로서 시멘트 종류 및 도막처리에 따른 콘크리트의 특성을 분석하였으며, 시험 결과 강도 및 염소이온침투 특성 등을 고려할 경우 해양용 혼합시멘트가 콘크리트의 내염성능 개선에 효과적인 것으로 나타났다.