• The Korean Journal of Pain
• /
• v.6 no.1
• /
• pp.67-73
• /
• 1993

소의 신선한 대뇌피질로부터 synaptosomal plasma membrane vesicles(SPMV)를 분리한 후 이 SPMV로부터 추출한 모든 인지질들로서 제제한 인공세포막(SPMVPL)에서의 n-alkanols 침투 정도를 형광 probe를 이용한 형광 소광법을 통하여 검색하였다. n-alkanols는 SPMVPL 외부 단층(outer monolayer)의 표면에 주로 분포하되 그 탄소수에 비례하여 소수성 부위에 분포되는 양이 증가되는 경향을 나타내었다. methanol, ethanol, 1-propano, 1-butanol, 1-pentanol, 1-hexanol, 1-heptanol, 1-octanol, 1-nonanol 및 1-decanol은 SPMVPL 외부 단층의 표면(친수성 부위)에 분포되는 것이 소수성 부위에 분포되는 것에 비하여 각각 432.4, 208.9. 125.6, 88.2, 19.3, 7.9, 2.6, 1.0, 0.42, 1.36배가 되었다. 1-decanol은 $C_{10}$인데도 불구하고 $C_8$인 1-octanol에 비하여 적은 양이 소수성 부위에 침투 분포된다는 것이 확인되었다. n-alkanols의 침투에 대하여 저자등이 이미 보고한 바 있는 SPMV 및 SPMVTL(cholesterol+phospholipids)의 경우보다도 본 연구에서의 SPMVPL의 경우가 현저하게 많은 양이 소수성 부위로 침투 분포된다는 것도 확인되었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3596-3601
• /
• 2015

Enhancement of the existing program for analyzing a pile driven by vibro hammer was tried. Damping effect of dynamic soil resistance and clutch friction were added to the existing governing equation which constitute vibrating system of vibro hammer-pile-soil. Parameters of the modified Ramberg-Osgood model which simulates dynamic load transfer curves for the developed program were recomputed. Comparing the results of the modified program with those of the field tests, pile displacement with time and load transfer behavior were more similar to those of the field test. The penetration rates obtained from the modified program were more close to those of the field test rather than those of the commertical program.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.3
• /
• pp.147-154
• /
• 2008

Weathered soil slope loses its shear strength if it is exposed in the air for a long time or in contact with water. And this kind of strength loss is remarkable in dam slope which has very big difference in water level according to the season. In this study, shear strength loss of weathered soil due to saturation had been found out through dryness and wetness repetition direct shear test. Also relation between penetration blow number(Nc) and shear strength parameter had been found out through small sized dynamic cone penetration test device and the correlation equation of Nc had been proposed through artificial neural network analysis to estimate shear strength parameter easily.

• Journal of Welding and Joining
• /
• v.17 no.1
• /
• pp.133-144
• /
• 1999

To fine seam annealer capacity of through thickness seam annealing in terms of through thickness microstructure change with increased toughness and elongation leaving heat trace on it, high strength steel pipes of ERW with different thickness were tested in different seam annealing temperature measured on the outer surface of pipes. Annealing temperature and microstructure of the weld seam were changed through applied seam annealing condition. Toughness and tensile test with hardness and microstructure analysis were done on the annealed weld seam to fine its characteristics as a primary step and annealing characteristics according to different seam annealing condition. Through a study of annealed ERW weld seam characteristics and seam annealing technology, amount of electric power should apply in decreased manner to arranged inductors of annealer in the order of 1st, 2nd, 3rd, so on for proper seam annealing. For example of 15.4mm thick and 610mm outside diameter pipe, applied power for proper seam annealing is 600 -650kw at 1st inductor, 450 - 500kw at 2nd inductor, 200-250 kw at 3rd inductor of annealer during 10 - 12M/minute moving speed of pipe. Also, the penetration depth of heat trace along the thickness direction of weld during seam annealing can be estimated through the equation 17mm/kv$\times$voltage(kv) with the microstructure and hardness analysis of thick weld seam as well as study of seam annealing and comparison of cooling condition to CCT diagram of low carbon high strength steel. From this result, the difference between the technological applicability of full annealing condition based on phase diagram and full penetration of heat trace based on CCT diagram along the thickness of weld seam is discussed.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.59-68
• /
• 2015

In this paper, we proposed a methodology of vulnerability analysis for armored fighting vehicle based on modeling and simulation. The SES/MB framework serves hierarchical representation of the structure for a complex systems and is easy to conduct modeling for the armored fighting vehicle which consists of various components. When the armored fighting vehicle is hit by the shots from threat, the vulnerability of the armored fighting vehicle is decreased by damaged or penetrated level of armors and components. The penetration is determined by the result of comparing a penetration energy through penetration analysis equation and defence ability of armor and components. And the defence ability is determined in accordance with type and defined property of normal component and armor component, all components have a weighted values for the degree of importance. We developed a simulation program for verification proposed methodology. Thus, the program analyzes vulnerability for armored fighting vehicle SES/MB framework using importance.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.8
• /
• pp.53-66
• /
• 2022

The national ground survey database (GeoInfo) distributes numerous ground survey data nationwide. Many standard penetration test results exist in this database; however, the number of shear wave velocity (V_S) data is small. Hence, to use abundant standard penetration test-N values to predict V_S, this study proposed a new empirical N-V_S relationship model using GeoInfo data. The proposed N-V_S model is a single equation regardless of geological layer types; the layer type only specifies the upper limit of V_S. To validate the proposed model, residual analysis was performed using a test dataset that was not used for the model development. Therefore, this study's proposed model performed better than N-V_S models from previous studies. Since the N-V_S model in this study was developed using sufficient data from GeoInfo, we expect that it is the most applicable to GeoInfo dataset for V_S prediction.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.6
• /
• pp.29-37
• /
• 2021

Since many geotechnical structures are constructed on a weathered granite layer, it is important to evaluate their characteristics. As a seismic design is the more important nowadays, the demands to estimate a shear wave velocity (V_S) based on acceptable methods are increasing. In this study, an empirical equation predicting V_S of the weathered granite layer is suggested based on the nonlinear multiple variable regression analysis whose independent variables are both SPT (Standard penetration test)-N₆₀ and chemical weathering index. It is concluded that the accuracy of the empirical equation estimating V_S of the weathered granite layer increases when it considers the chemical weathering index as an additional independent variable compared to the result of simple regression analysis using only N₆₀.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.2
• /
• pp.222-225
• /
• 1993

To obtain a thermal diffusivity predicting equation for meat products, minced pork meat was mixed with some additives such as lard, isolated soybean protein, 1.5% of table salt and 2% of polyphosphate to control the composition and texture of the products and then stuffed in a model can. Heat penetration curves were measured in the temperature range of 80.76~121.03$^{\circ}C$ by using a thermocouple fixed at the cold point of the model can and the thermal diffusivities were calculated from the plotted heat penetration curves. At constant heating temperature, the thermal diffusivities of pork meat with water content of 49.01~77.55% increased linearly with increasing water content. The thermal diffusivities of the products with constant water content also increased linearly with increasing heating temperature and the values could be predicted by following equation: $\alpha$p=(2.1394+0.5X$_{w}$).$\alpha$$_{w}$+0.0035.10$^{-6}$ .X$_{w}$-0.2785.10$^{-6}$ ,(m$^2$.s$^{-1}$ ). The maximal difference of the values predicted with this equation on the basis of the practical measured values were less than 1.7%. 1.7%.

• Journal of Welding and Joining
• /
• v.14 no.4
• /
• pp.33-42
• /
• 1996

In recent years there has been a significant growth in the use of the automated and/or robotic welding system, carried out as a means of improving productivity and quality, reducing product costs and removing the operator from tedious and potentially hazardous environments. One of the major difficulties with the automated and/or robotic welding process is the inherent lack of mathematical models for determination of suitable welding process parameters. Partial-penetration, single-pass bead-on-plate welds were fabricated in 12mm AS 1204 mild steel flats employing five different welding process parameters. The experimental results were used to develop three empirical equations: curvilinear; polynomial; and linear equations. The results were also employed to find the best mathematical equation under weld bend width to assist in the process control algorithms for the Gas Metal Arc Welding(GMAW) process and to correlate welding process parameters with weld bead width of bead-on-plates deposited. With the help of a standard statistical package program. SAS, multipe regression analysis was undertaken for investigating and modeling the GMAW process, and significance test techniques were applied for the interpretation of the experimental data.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.186-191
• /
• 2004

The reactive flowfield of the transverse injecting combustor has been studied using Euler-Lagrange method in order to develop an efficient solution procedure for the understanding of liquid spray combustion in the transverse injecting combustor which has been widely used in ramjets and turbojet afterburners. The unsteady two-dimensional gas-phase equations have been represented in Eulerian coordinates and the liquid-phase equations have been formulated in Lagrangian coordinates. The gas-phase equations based on the conservation of mass, momentum, and energy have been supplemented by combustion. The vaporization model takes into account the transient effects associated with the droplet heating and the liquid-phase internal circulation. The droplet trajectories have been determined by the integration of the Lagrangian equation in the flow field obtained from the separate calculation without considering the iterative effect between liquid and gas phases. The reported droplet trajectories had been found to deviate from the initial conical path toward the flow direction in the very end of its lifetime when the droplet size had become small due to evaporation. The integration scheme has been based on the TEACH algorithm for gas-phase equation, the second order Runge-Kutta method for liquid-phase equations and the linear interpolation between the two coordinate systems. The calculation results has shown that the characteristics of the droplet penetration and recirculation have been strongly influenced by the interaction between gas and liquid phases in such a way that most of the vaporization process has been confined to the wake region of the injector, thereby improving the flame stabilization properties of the flowfield.