• 터널과지하공간
• /
• 제17권3호
• /
• pp.225-233
• /
• 2007

노르웨이는 계곡이나 피요르드와 같은 굴곡이 심한 지형 때문에 터널이 많이 건설되었으며, 그 가운데 지난 30년 동안 59개의 터널이 전단면 기계굴착으로 완성되었다. 이러한 기계굴착 경험을 통하여 예측기법이 개발되고 발전되었으며 마침내 국립공과대학인 NTNU에서 예측법이 체계화되었다. 본 보고는 TBM 굴착자료가 알려진 14개의 노르웨이 터널과 4개의 국내의 터널에서 순굴착속도와 굴진속도를 분석하여, 이들의 발전경향을 연구한 것이다. 이 기간동안 노르웨이에서는 디스크 커터의 직경을 증대시키고 배열을 최적화하여 순굴착속도와 굴진속도를 두배 정도로 증진시켰다. 국내에서도 1980년부터 1990대까지 15년 동안 IBM의 굴진속도는 노르웨이에 비하여 작은 크기이지만 뚜렷이 증가하는 경향을 보였다. 이러한 작은 속도는 암반의 특성에도 기인하지만 17 인치보다 작은 직경의 디스크 커터를 사용한데 크게 기인된 것으로 판단된다. 향후 국내의 전단면 기계굴착에서 장비와 기술의 개선을 이루고, 특히 17 또는 19 인치의 디스크 커터를 사용한다면 순굴착속도와 굴진속도를 향상시킬 수 있을 것으로 예측된다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.419-424
• /
• 2012

This paper presents a tubular reciprocating translational motion permanent magnet synchronous motor for percussive drilling applications for offshore oil & gas industry. The motor model and rock model are built up by doing force analysis of the motor and analyzing the physical procesof impact. The optimization of input voltage waveforms to maximize the rate of penetration is done by simulations. The simulation results show that the motor can be utilized in percussive drilling applications and achieve a very large impact force. Simulation results for optimization also show that second harmonic input voltage produces a higher rate of penetration than the sine wave and fourth harmonic input voltages.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.542-545
• /
• 2007

A semi-closed loop ground heat exchanger is proposed and its performance is compared through the measuring the effective thermal conductivity of the ground. In-situ tests based on the line source model are carried out to evaluate the thermal characteristics of each ground heat exchanger which has different penetration water flow rate. The test results show the increasing effective thermal conductivity of ground as the penetration water flow rate(PWFR) is increased. Therefore, the higher thermal performance of the proposed semi-closed ground heat exchanger can be expected.

• Archives of Pharmacal Research
• /
• 제19권3호
• /
• pp.183-190
• /
• 1996

There are a wide variety of semi-solid ointments used for healing the skin diseases, whose therapeutic and skin penetration abililties may greatly differ from one another depending on the compositions of ointment vehicles. A computer optimization technique was applied to obtain the optimum formula of o/w type ointment giving the in vitro maximum absorption rate through hairless rat skin membrane. Some of the formulations were selected to find out a relationship between skin penetration of ointment and its Theological characteristics. The experimental value of absorption rate obtained from the ointment by optimum formula agreed well with the theoretical value obtained from a polynomial regression analysis, Three kinds of ointments selected among 15 formulations were obtained with a concentric cylinder type rheometer (Model; Rheolab SM-HM Physica, Germany) at 20, 30, 40 and $50^{\circ}C$ for rheograms of rhelolgical properties of o/w type ointments. As the temperature was raised, all products showed a decrease in both shear stress and yield values. The higher skin penetration, the lower shear stress showed.

• Journal of Welding and Joining
• /
• 제33권5호
• /
• pp.47-52
• /
• 2015

In this study, it was tried to analyze the effects of welding parameters on the weld penetration and aspect ratio when a STS316L pipe was welded in a horizontal position by GTAW. Experiments were systematically designed using a L18 orthogonal array, and the effects of welding parameters were statistically analyzed by ANOVA(Analysis of Variance). The shielding gas type has the largest effect on both the penetration and aspect ratio. The welding current type and shielding gas flow rate have a little effect on the penetration, whereas the electrode tip angle has a little effect on the aspect ratio. When welded at a selected welding condition, which is composed of He shielding gas, pulse current of 300/45 A, electrode tip angle of 90o, and shielding gas flow rate of 30 l/min, the estimated interval at least 95 % confidence was $1.99{\pm}0.18mm$ for the penetration and $0.31{\pm}0.04$ for the aspect ratio. From the confirmation experiments, the average penetration and aspect ratio were well agreed with the estimation as 1.96 mm and 0.30, respectively. Additionally, the effects of the welding speed and welding current on the penetration and aspect ratio were experimented and analyzed by linear regression. The penetration was linearly increased with the decrease of the welding speed and with the increase of the welding current, but the aspect ratio showed a tendency to a little decrease with the increase of both the welding speed and current.

• 지질공학
• /
• 제31권4호
• /
• pp.541-547
• /
• 2021

비탈면의 유실, 붕락사고 등 비탈면에 대한 안정성을 파악하기 위해서 지층의 구성상태, 역학적 특성 등의 지반정보 파악이 필요하다. 이러한 지반정보를 파악하기 위해서 일반적으로 표준관입시험(SPT) 및 콘 관입시험 등이 널리 이용되고 있다. 대부분이 급경사로 이루어지고 진입로가 없는 비탈면에 대한 접근성 문제로 표준관입시험이 널리 활용되지 못하고 있다. 이러한 단점을 보완할 수 있는 있는 휴대용 장비인 Drop Cone Penetrometer(DCP)를 이용한 조사도 여러 가지 문제로 제한적으로 사용되고 있다. 따라서 본 연구에서는 비탈면 현장접근이 용이한 휴대용 시추기와 동적콘관입시험 모듈을 개발하고, 개발된 동적콘관입시험기를 이용한 결과와 동일 현장에서 수행한 표준관입시험값과 상관성을 분석하였다. 에너지전단율로 보정된 동적콘관입시험과 표준관입시험간의 상관식은 N_d' = 3.13 N'으로 나타났다.

• Clinical and Experimental Reproductive Medicine
• /
• 제16권1호
• /
• pp.15-21
• /
• 1989

An in vitro fertilization assay employing zona-free hamster embryos was used to investigate human spermatozoal fertilitzing ability. Yanaghimarchi et al.(1976) first introduced this cross species fertilzation technique, with its application as a diagnostic tool for male infertility. Human spermatozoa were preincubated for 3 to 4 hrs in B W W medium at concentration of $4{\times}10^6$ sperm/ml prior to the addition to zona-free hamster embryos. After 3 hrs, human sperm was evaluated for fertilizing potential by the presence of swelling or decondencing sperm head in the cytoplasm. The results of penetration rates for sperm were as follow : 1. The average penetration rate of a 7 fertile donor group was $47.8{\pm}27.67%$(Range 14.3-98.0%) 2. The average penetration rate of 12 infertile patients with normal semen analysis was $21.7{\pm}26.9%$(Range 0-38.8%) 3. The average penetration rate of 10 infertile patients with semen abnormalities was $6.1{\pm}8.1%$(Range 0-25%)

• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.671-678
• /
• 2006

진동해머를 이용한 널말뚝 시공은 소음에 민감한 도심지 굴착 공사에 유용하다. 그러나 널말뚝의 진동-항타 시공시 항타관입성에 대한 연구는 거의 수행된 적이 없다. 이 연구에서는 국내에서 많이 사용되고 있는 U형 널말뚝을 진동해머를 이용하여 시공할 때 여러 가지 조건에 따른 항타관입성을 WEAP 프로그램을 이용하여 분석하였다. 해석결과 널말뚝의 관입속도는 N값이 클수록 느려지며, 20m 이내로 시공되는 경우 단면적이 클수록 느려지는 것으로 나타났다.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.858-864
• /
• 2018

Graphene oxide (GO) laminate is a new promising material for water purification system, which has extraordinary permeability only for water molecule. It consists of numerous nano-channels, in which water molecules could be nano-confined, resulting in slip of the molecules for very fast transportation speed. In this study, water penetration rate via different thickness of GO membrane according to driven pressures are measured experimentally, so that speed of water molecules and permeability are evaluated. Generally, water penetration rate via a membrane with macroscopic-sized channel increases linearly with pressure difference between up and bottom side of the membrane, but that via GO membrane approaches asymptotic value (i.e. saturation) as like a log function. Moreover, the permeability of GO membrane was observed in inverse proportion to its thickness. Based on the experimental observations, a correlation for volume flux via GO membrane was suggested with respect to its thickness and external pressure difference.

• 한국레이저가공학회지
• /
• 제5권1호
• /
• pp.33-42
• /
• 2002

In order to investigate the characteristics of the plasma induced by lap-joint CO$_2$ laser welding of automotive steel sheets, the effects of welding speed, shield gas flow rate, gap size, and laser beam defocus to plasma intensity emitted from keyhole have been investigated. The plasma light is measured by fiber and photodiode. Also, the plasma images were captured by the high speed digital camera in 1000frames/sec in order to correlate the plasma light signal with plasma pattern. From the results, it is observed that the difference of the plasma intensity for between the deep penetration and partial penetration exists from 1.2 to 2 times. The plasma light intensity decreased in case of the deep penetration Is observed due to the exhausting of the plasma gas under the sheet. On the other hand, under the conditions of the deep penetration, the plasma intensity is significantly increased by controling the conditions decreasing the penetration depth. It was specially founded that the effect of 0.3mm gap size at partial penetration condition is approximately similar to deep penetration in 0mm gap. It is concluded that the plasma intensity is able to evaluate the penetration depth in lap-joint welding and appears to offer the most straightforward correlation to the welding process.