• 접착 및 계면
• /
• 제2권4호
• /
• pp.32-38
• /
• 2001

본 실험에서는 공가류와 내오존성을 동시에 만족하는 고무 조성비의 영향에 대하여 검토하였다. 사용한 시편은 NR, SBR, BR, IIR 및 EPDM을 다양한 비율로 블렌딩 한 고무 조성물(시편 A), NR/BR/SBR로 구성된 불포화 고무 조성물(시편B)와 NR/IIR/EPDM로 구성된 포화 고무 조성물(시편C)이다. 시편A와 시편B, 시편A와 시편C를 각각 공가류시켜 PAD 접착 시편을 제작하여 박리강도를 측정하였다. 또한 시편A에 대해서 내오존성을 평가하였다. 시편 A의 불포화 고무 조성중(NR/BR Blend)에 BR보다 NR의 비율이 높을수록 시편B와 시편C와의 접착 강도가 높았고, 또다른 불포화 고무 조성(NR/SBR)에서는 NR보다 SBR 함량이 높을수록 접착 강도는 높았다. 또한 시편A의 조성중에서 NR/BR/IIR/EPDM 조성물 보다 NR/SBR/IIR/EPDM 조성물이 접착성이 우수하였다. 고무 조성중 불포화 고무가 많을수록 접착 강도는 우수하였으나, 내오존성은 다소 열세였다. 불포화 고무와 포화 고무의 비율이 60/40 정도 일 때 접착 강도와 내오존성이 모두 양호하였다.

• 접착 및 계면
• /
• 제25권1호
• /
• pp.162-168
• /
• 2024

The effect of maleinized polybutadiene (MPB) on the mechanical properties of epoxy resins including adhesion strength, elongation and impact peel resistance was investigated in this study, in which MPB is an anhydride-functionalized polybutadiene prepolymer. Different molecular weights (3.1K and 5.6K) of MPB were added to diglycidyl ether bisphenol-A (DEGBA), an epoxy resin, to increase its impact peel strength and elongation. At various loading percent (5, 10, 15, 20 and 25 wt%) of MPB in the epoxy resin, significant improvements of mechanical properties were observed. According to the comparative analysis results, the modified epoxy system with 15 wt% (3.1K) MPB exhibited the highest lap shear strength, about 40% higher than that of neat epoxy. The tensile strength and elongation steadily and simultaneously increased as the loading percent of MPB increased. The impact peel strengths at low (-40℃) and room (23℃) temperatures were substantially improved by MPB incorporation into epoxy resins. Reactive and flexible MPB prepolymer seems to construct strong nano-structured networks with rigid epoxy backbones without sacrificing the tensile and adhesion strengths while increasing impact resistance/toughness and elongation properties. For higher impact peel while maintaining adhesion and tensile strengths, approximately 10-15 wt% MPB loading in epoxy resin was suggested. Consequently, incorporation of functionalized MPB prepolymer into epoxy system is an easy and efficient way for improving some crucial mechanical properties of epoxy resins.

• Natural Product Sciences
• /
• 제29권2호
• /
• pp.91-97
• /
• 2023

Mangosteen peel extract is a xanthone group, that plays an important role in anti-angiogenesis. This study investigated mangosteen peel extract on cerebral neovascularization in type 2 diabetes mellitus (DM) rats. This study used 36 rats, randomized into six groups: C1 (negative control); C2 (high fat diet (HFD) and mangosteen peel extract at 200 mg/kg BW); C3 (HFD and diabetic); E1, E2, and E3 (HFD, diabetic, and extract at 100, 200, and 400 mg/kg BW respectively). All groups were measured body mass index (BMI), homeostasis model assessment-insulin resistance (HOMA-IR) and β cell function (HOMA-B), and histopathological feature of cerebral vascular (CV). There were significant differences in BMI, HOMA-IR, HOMA-B, and the mean number of CV (all p < 0.05) among treatment groups. E1-3 groups had a significantly lower level of blood glucose and HOMA-IR, and a higher level of HOMA-B and BMI (all p < 0.05) which tends to reduce cerebral neovascularization. HOMA-IR independently had a positive effect to induce neovascularization of CV (p < 0.05, R² = 26.8%). These findings suggested that mangosteen peel extract increased β-cell function sensitivity, and effectively suppressed insulin resistance, BMI, and cerebral neovascularization process in type 2 DM rats.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.73-77
• /
• 2008

In this study, we would like to study on the application of roof exposure waterproofing method of joint stability through shiplap rubberized asphalt color sheet to complement problem of fracture, exfoliation and water leakage by existing roof exposure sheet waterproofing material joint weakness. Accordingly, examined basis performance and stability for joint that shiplap rubberized asphalt color sheet through test of that tensile strength, bonding strength, water permeability after bonding, peel resistance after bonding, lengthen resistance after bonding and hang resistance after bonding. The results of this study, waterproofing method to using shiplap rubberized asphalt color sheet is judged to solved fracture, exfoliation and water leakage problems happened in joint by problem was joint of exposure sheet by minimizing gap of joint being integration by shiplap.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.613-614
• /
• 2010

• 접착 및 계면
• /
• 제19권3호
• /
• pp.118-122
• /
• 2018

본 연구에서는 에스터기를 함유하는 직물 접착용 폴리우레탄 핫멜트 접착제를 합성하였다. 분자량 증가를 위하여 서로 다른 3종의 사슬 연장제를 사용하였고, 사슬연장제의 종류에 따른 분자량 변화와 접착물성 변화를 비교하였다. 사슬연장제로써1,4-부탄디올을 사용한 경우 다른 사슬연장제를 사용했을 때 보다 더 높은 박리강도를 나타내었으며, 높은 박리강도를 발휘하는 최적의 분자량이 존재함을 알게 되었다. 또한, 핫멜트 접착제를 다양한 직물 즉, 면, 폴리에스터 그리고 우레탄이 코팅된 폴리에스터에 대하여 접착시킨 후 접착력 측정과 $60^{\circ}C$ 물에 대한 내수성 실험을 수행한 결과 면직물에 대한 박리강도가 가장 큼을 보였고 우레탄 코팅된 폴리에스터 직물에 대해 가장 큰 내수성을 보였다.

• 한국응용과학기술학회지
• /
• 제22권4호
• /
• pp.332-338
• /
• 2005

This study was conducted to prepare acrylic removable protective coatings by emulsion polymerization. Monomers used were n-butyl acrylate, acrylonitrile, butyl methacrylate. Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was 200 rpm. Tensile strength, extension, peel strength, viscosity, and solid contents of the synthesized coatings were examined. The coatings prepared with BA:AN = 60:20 (in weight ratio) satisfied the standard for automobile in terms of extension and peel strength. When the concentration of BMA was in a range of $18{\sim}23$ wt%, the prepared coatings satisfied the standard for automobile in terms of peel strength and water resistance.

• 한국응용과학기술학회지
• /
• 제18권4호
• /
• pp.316-324
• /
• 2001

To prepare an acrylic type pressure-sensitive adhesive, quarternary polymers were synthesized from butyl acrylate (BA), 2-ethyl hexyl acrylate (2-EHA), methyl methacrylate (MMA), and 2-hydroxy ethyl methacrylate (2-HEMA). The quarternary polymers were identified by FT-IR and Molecular weight was measured by Gel Pearmeation Chromatography. Also, viscosity, solid content and peel strength were examined. The peel strength was 160 $g_{f}/25$ mm when the volume ratio of feed monomer to solvent was 1.3:1, and the ratio was relevant to commercial usage. The pot life of adhesive was 30 sec at the 50 m/min of heat treatment rate at, and it indicated that the minimum drying time was 30 sec. In weathering resistance test, peel strength of $160{\sim}180$ $g_{f}/25$ mm after 1000 h, with no residual remains on the adhesive surface.

• 폴리머
• /
• 제32권4호
• /
• pp.313-321
• /
• 2008

UV개시에 의해 광경화형 아크릴 공중합체를 합성하고 제조된 아크릴 점착제(PSA)의 박리 에너지와 물리적 특성을 조사하였다. 이때 acrylic acid(AA)의 함량을 변화시켜 점착제의 물성을 변화시켰으며, 피착제의 표면 거칠기, 표면 요철방향, 점착제의 두께를 변화시킴으로써 박리 에너지의 변화 추이를 조사하였다. 공단량체인 acrylic acid의 함량이 증가함에 따라 표면 거칠기가 낮은 피착제가 높은 박리 에너지를 보였으며 점착제의 두께가 두꺼워 질수록 증가하였다. 또한 피착제 표면의 요철방향이 박리방향과 수평일 때 특히 높은 박리 에너지를 갖는 것으로 나타났다. 이것은 점착제의 두께 감소와 피착제 표면 거칠기의 증가가 wetting의 감소를 초래하지만 박리 시 저항력은 오히려 증가하는 경향을 나타내기 때문일 것이라는 예상과도 잘 일치한다.

• 접착 및 계면
• /
• 제18권4호
• /
• pp.166-170
• /
• 2017

본 연구에서는 2-ethylhexyl acrylate, styrene, butadien, 2-hydroxyethyl acrylate, acrylic acid 등의 단량체 조성과 개시제 함량을 조절하여 아크릴고무 점착제를 합성하였다. 제조된 점착제를 이용하여 점착부여제와 경화제를 변화시켜 초기점착력, 점착력, 유지력, 그리고 내열성을 측정함으로써 그 영향을 조사하였다. 실험 결과 개시제의 함량이 증가하면 분자량이 감소하여 초기점착력과 점착력이 증가하였으나, 유지력과 내열성은 감소하는 것을 확인 할 수 있었다. 점착부여제에 따른 물성 변화는 점착부여제의 함량을 높일수록 일정 수준까지는 점착력이 높아 졌으나, 초기점착력과, 유지력, 내열성에서는 함량변화에 따른 물성변화가 크지 않았다. 경화제 함량에 따른 물성 변화는 경화제의 함량을 높일수록 경화밀도가 증가하여, 초기점착력과 점착력은 감소하였고 반면에 유지력과 내열성은 높아지는 경향을 나타내었다.