• Journal of Adhesion and Interface
• /
• v.2 no.4
• /
• pp.32-38
• /
• 2001

Effects of the ratio of rubber composition on covulcanization and ozone resistance were studied in this study. Specimens used in this study were rubber compounds(specimen-A) blended with various ratio of NR, SBR, BR, IIR, and EPDM, unsaturated rubber compounds(specimen-B) with NR/BR/SBR, and saturated rubber compounds(specimen-C) with NR/IIR/EPDM. PAD adhesion specimen was prepared from vulcanizing specimen-A and B, and specimen-A and C, respectively. Using same adhesion specimen, peel strength was measured and tested ozone resistance. In specimen-A, peel strength was higher with increasing NR ratio for NR and BR contained blends. In other specimen-A containing NR and SBR, the peel strength was also increased with increasing SBR ratio. NR/BR/IIR/EPDM rubber compounds had also better adhesion property than NR/SBR/IIR/EPDM compounds. As more unsaturated rubber was blended, the peel strength was higher but ozone resistance was worse. Optimum ratio of unsaturated and saturated rubbers for the peel strength and ozone resistance was 60/40.

• Journal of Adhesion and Interface
• /
• v.25 no.1
• /
• pp.162-168
• /
• 2024

The effect of maleinized polybutadiene (MPB) on the mechanical properties of epoxy resins including adhesion strength, elongation and impact peel resistance was investigated in this study, in which MPB is an anhydride-functionalized polybutadiene prepolymer. Different molecular weights (3.1K and 5.6K) of MPB were added to diglycidyl ether bisphenol-A (DEGBA), an epoxy resin, to increase its impact peel strength and elongation. At various loading percent (5, 10, 15, 20 and 25 wt%) of MPB in the epoxy resin, significant improvements of mechanical properties were observed. According to the comparative analysis results, the modified epoxy system with 15 wt% (3.1K) MPB exhibited the highest lap shear strength, about 40% higher than that of neat epoxy. The tensile strength and elongation steadily and simultaneously increased as the loading percent of MPB increased. The impact peel strengths at low (-40℃) and room (23℃) temperatures were substantially improved by MPB incorporation into epoxy resins. Reactive and flexible MPB prepolymer seems to construct strong nano-structured networks with rigid epoxy backbones without sacrificing the tensile and adhesion strengths while increasing impact resistance/toughness and elongation properties. For higher impact peel while maintaining adhesion and tensile strengths, approximately 10-15 wt% MPB loading in epoxy resin was suggested. Consequently, incorporation of functionalized MPB prepolymer into epoxy system is an easy and efficient way for improving some crucial mechanical properties of epoxy resins.

• Natural Product Sciences
• /
• v.29 no.2
• /
• pp.91-97
• /
• 2023

Mangosteen peel extract is a xanthone group, that plays an important role in anti-angiogenesis. This study investigated mangosteen peel extract on cerebral neovascularization in type 2 diabetes mellitus (DM) rats. This study used 36 rats, randomized into six groups: C1 (negative control); C2 (high fat diet (HFD) and mangosteen peel extract at 200 mg/kg BW); C3 (HFD and diabetic); E1, E2, and E3 (HFD, diabetic, and extract at 100, 200, and 400 mg/kg BW respectively). All groups were measured body mass index (BMI), homeostasis model assessment-insulin resistance (HOMA-IR) and β cell function (HOMA-B), and histopathological feature of cerebral vascular (CV). There were significant differences in BMI, HOMA-IR, HOMA-B, and the mean number of CV (all p < 0.05) among treatment groups. E1-3 groups had a significantly lower level of blood glucose and HOMA-IR, and a higher level of HOMA-B and BMI (all p < 0.05) which tends to reduce cerebral neovascularization. HOMA-IR independently had a positive effect to induce neovascularization of CV (p < 0.05, R² = 26.8%). These findings suggested that mangosteen peel extract increased β-cell function sensitivity, and effectively suppressed insulin resistance, BMI, and cerebral neovascularization process in type 2 DM rats.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.73-77
• /
• 2008

In this study, we would like to study on the application of roof exposure waterproofing method of joint stability through shiplap rubberized asphalt color sheet to complement problem of fracture, exfoliation and water leakage by existing roof exposure sheet waterproofing material joint weakness. Accordingly, examined basis performance and stability for joint that shiplap rubberized asphalt color sheet through test of that tensile strength, bonding strength, water permeability after bonding, peel resistance after bonding, lengthen resistance after bonding and hang resistance after bonding. The results of this study, waterproofing method to using shiplap rubberized asphalt color sheet is judged to solved fracture, exfoliation and water leakage problems happened in joint by problem was joint of exposure sheet by minimizing gap of joint being integration by shiplap.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.613-614
• /
• 2010

• Journal of Adhesion and Interface
• /
• v.19 no.3
• /
• pp.118-122
• /
• 2018

In this study, polyurethane hot melt adhesive containing ester groups was synthesized. Three kinds of chain extenders were used to find out the best chain extender. Results showed that adhesive containing 1,4-butanediol as a chain extender exhibited the highest peel strength among them. Also, it was found that there existed the optimum molecular weight of 1,4-butanediol containing adhesive for make the highest peel strength.. Moreover, hot melt adhesive containing 1,4-butanediol chain extender was applied to various kinds of textiles substrate such as cotton, polyester, and urethane coated polyester textiles to study the effects of different substrates on the peel strength and water resistance at $60^{\circ}C$. It was found that cotton substrate showed the highest peel strength and urethane coated polyester substrate showed the highest resistance on $60^{\circ}C$ water.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.4
• /
• pp.332-338
• /
• 2005

This study was conducted to prepare acrylic removable protective coatings by emulsion polymerization. Monomers used were n-butyl acrylate, acrylonitrile, butyl methacrylate. Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was 200 rpm. Tensile strength, extension, peel strength, viscosity, and solid contents of the synthesized coatings were examined. The coatings prepared with BA:AN = 60:20 (in weight ratio) satisfied the standard for automobile in terms of extension and peel strength. When the concentration of BMA was in a range of $18{\sim}23$ wt%, the prepared coatings satisfied the standard for automobile in terms of peel strength and water resistance.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.4
• /
• pp.316-324
• /
• 2001

To prepare an acrylic type pressure-sensitive adhesive, quarternary polymers were synthesized from butyl acrylate (BA), 2-ethyl hexyl acrylate (2-EHA), methyl methacrylate (MMA), and 2-hydroxy ethyl methacrylate (2-HEMA). The quarternary polymers were identified by FT-IR and Molecular weight was measured by Gel Pearmeation Chromatography. Also, viscosity, solid content and peel strength were examined. The peel strength was 160 $g_{f}/25$ mm when the volume ratio of feed monomer to solvent was 1.3:1, and the ratio was relevant to commercial usage. The pot life of adhesive was 30 sec at the 50 m/min of heat treatment rate at, and it indicated that the minimum drying time was 30 sec. In weathering resistance test, peel strength of $160{\sim}180$ $g_{f}/25$ mm after 1000 h, with no residual remains on the adhesive surface.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.313-321
• /
• 2008

Acrylic pressure sensitive adhesive(PSA) was prepared by UV radiation curing and the peel energy and physical properties of PSA were investigated. The increase of amount of acrylic acid leads to improve the peel energy, associated with the substrate having smooth surface and high layer thickness. The high peel energy is obtained when the direction of irregularity in substrate is horizontal with the peeling direction. This is attributed to the increase of resistance to peeling in spite of decrease of wetting and the result corresponds to our supposition.

• Journal of Adhesion and Interface
• /
• v.18 no.4
• /
• pp.166-170
• /
• 2017

In this study, acrylic rubber pressure sensitive adhesives was polymerized with 2-ethylhexyl acrylate, styrene, butadiene, 2-hydroxyethyl acrylate, and acrylic acid by controlling the initiator content. The initial tackiness, peel strength, holding power, and heat resistance of the PSAs were investigated by changing the content of tackifier and curing agent. The results showed that the initial tackiness and peel strength increased as the content of tackifier increased, whereas the holding power decreased. Also, the results exhibited that that the initial tackiness, peel strength, and heat resistance decreased as the content of curing agent increased, whereas the holding power and decreased.