• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.5
• /
• pp.335-341
• /
• 2018

The KDE (Kernel Density Estimation) technique in GIS (Geographic Information System) has been widely used as a method for determining whether a phenomenon occurring in space forms clusters. Most human-generated events such as traffic accidents and retail stores are distributed according to a road network. Even if events on forward and rear roads have short Euclidean distances, network distances may increase and the correlation between them may be low. Therefore, the NKDE (Network-based KDE) technique has been proposed and applied to the urban space where a road network has been developed. KDE is being studied in the field of business GIS, but there is a limit to the microscopic analysis of economic activity along a road. In this study, the NKDE technique is applied to the analysis of urban phenomena such as the density of shops rather than traffic accidents that occur on roads. The results of the NKDE technique are also compared to pedestrian networks and road centerline networks. The results show that applying NKDE to microscopic trade area analysis can yield relatively accurate results. In addition, it was found that pedestrian network data that can consider the movement of actual pedestrians are necessary for accurate trade area analysis using NKDE.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.7-15
• /
• 2010

The walkway level of service (LOS) is conceptualized using pedestrian flow rate, speed, and density according to the Korean Highway Capacity Manual (KHCM). However, as it is based on the data of commuters at peak hours, it needs to be reevaluated considering various trip purposes and a pleasant pedestrian environment. Thus, the authors aimed to investigate and analyze the characteristics of each group: pedestrians during the peak hour and those during the non-peak hour. Then they were verified statistically for the walkway evaluation criteria. In this study, the authors investigated pedestrian speed and flow in a complex transit center walkway with diverse trip purposes by peak and non-peak hour. Then the authors statistically verified the differences between the groups. A model was built for estimating pedestrian density by speed and flow; it was used to calculate the walkway capacity (67.3p/m/m) corresponding to LOS E. The authors established new criteria for LOS, applying the LOS from the HCM. These standards can then be used as the design standards for pedestrian walkways.

• Journal of Korean Society of Transportation
• /
• v.34 no.2
• /
• pp.168-179
• /
• 2016

This study describes an improved model for estimating pedestrian LOS (Level of Service) by utilizing the space occupied by pedestrians. The method introduced the concept of conflict along the bi-directional pedestrian flow which enables calculating conflict area and average travel time in walking. Especially, the method incorporates the idea of generalized density concept which can consider effective walking area and pedestrian flow rates that might vary during the analysis period. After establishing methodology, adjustments of pedestrian LOS criteria in term of walking space occupied by pedestrians were performed. As a result, walking-occupied space at capacity level is 0.68 and corresponding pedestrian flow rate was calculated as 80 persons/min/m, while different pedestrian-occupied spaces were ordered to classify LOS at the points where the gradient changes. Furthermore, the statistical verification of service levels has shown that there is significant difference among all LOS categories at 5% significance level.

• Journal of Korea Multimedia Society
• /
• v.21 no.4
• /
• pp.499-512
• /
• 2018

The application of analytical techniques for the rational determination of problems arising from management science and corporate management. In a way that is the opposite of the repair plan that can predict accurate results is increasing utilization of the complex-based analysis methodology. In this study, we examined the application of physical space and the methodological utilization of the pedestrian model analysis that applied the simulation to the Health Checkup Center. The conclusions are as follows. First, the spatial analysis and measurement for empirical research has confirmed that the efficiency assessment through the pedestrian model simulation can lead to an objective evaluation. Second, it seems to be able to reduce the queue through a change in the number of services of the low-pressure and the hearing laboratory, the recovery room with a high proportion of male disturbances and relatively long use time. The third, the spatial density analysis and the time required to reduce the density change in comparative analysis, and the spatial layout changes, the increase in the capacity of 80 people, approximately 16 minutes to shorten the process duration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.259-268
• /
• 2016

The core strategy of transit oriented development (TOD) is to promote high density mixed land use around railway stations. Case studies in advanced countries show that provision of policies for comprehensive maintenance of pedestrian facilities around railway station spheres is being pursued with efficacy. In spite of the importance placed on integrated pedestrian maintenance, domestic construction of integrated pedestrian infrastructure around railway station spheres lacks direction. Thus, there is a clear need for an evaluation standard that can provide the foundation for judgments on TOD improvement. This research proposes a network model that consolidates the interior of the station as well as its surrounding areas to determine the ease of pedestrian flow for effective TOD evaluation. The model considers the railway station and surrounding areas as an assembled network of pedestrian flow. The path chosen by the pedestrian is defined as the optimal degree of inconvenience, and expands on Wardrop's User Equilibrium (1952). To assess the various circumstances that arise on pedestrian facilities including congestion of the pedestrian pathway, constrained elevator capacity, and wait at the crosswalk, a variational inequality based pedestrian equilibrium distribution model is introduced.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.26-36
• /
• 2020

The use of existing macroscopic research of pedestrian behavior on the walking link as data is limited in determining an individual pedestrian's moving route and the level of service. In macroscopic studies, it is difficult to make quantitative indices, such as pedestrian flow rate, occupied space, density, and speed for determining the level of service on pedestrian roads. Therefore, the microscopic pedestrian route is required to establish appropriate pedestrian policies. In this study, the Yeok-Sam subway station network was examined using a micro-simulation VISSIM, which was then calibrated and validated statistically. The Pedestrian Road's Level of Service of Yeok-Sam subway station area was evaluated using the pedestrian speed as the evaluating index on the Korean highway capacity handbook.

• Journal of Korean Society of Transportation
• /
• v.20 no.1
• /
• pp.91-99
• /
• 2002

The purpose of in this paper is to estimate the capacity and to suggest the level of service for pedestrian walkway. To estimate the pedestrian walkway capacity, Pedestrian density and speed were collected at the walkways in the subway station and the sidewalks. The simple linear repression of pedestrian density and speed models were developed for the relationships between the pedestrian flow rate and the pedestrian speed. The analysis results are as follow : First. the ranges of capacity for walkway were found minimum 106p/m/m and maximum 126p/m/m. The capacity of walkway was suggested to 106p/m/m for 2001 KHCM. Second, it found that the range of the critical speeds were between 40m/minute and 43m/minute and the range of the critical densities were between 2.65 p/$m^2$ and 2.85 p/$m^2$. Third, the range of level of service are similar to that of the 2,000 US HCM. This study suggests that occupancy, density and speed at Los E use 0.38$m^2$/p, 2.6 p/$m^2$ and 40m/minute respectively.

• Journal of the Korean Regional Science Association
• /
• v.38 no.2
• /
• pp.59-72
• /
• 2022

In line with increasing interest of climate change and pedestrian rights, the city of Seoul has been implementing car-free pedestrian street policies. The government and the private sector agreed to introduce carfree streets, expecting to increase the urban vibrancy and attract customers in the streets. However, studies that empirically analyze the effects of the policy are insufficient, and there are no studies that reevaluate the car-free pedestrian street policy after the COVID-19 outbreak. Therefore, this study evaluates the car-free pedestrian street policy at the commercial street, the Jongno 52-gil, using the synthetic control method. As a result of the analysis, it was found that the car-free pedestrian street policy was valid for enhancing urban vibrancy. Also, it was found that proper time interval is required to assess the policy since the peak increase of policy was observed in 3 months after the policy implementation. However, less than a year, the increase of the de facto population density on the Jongno 52-gil was revealed to be insignificant. In addition, the Jongno 52-gil was more vulnerable in the decrease of the de facto population density in the COVID-19 period than the synthetic control region. The results of this study suggest that long-term population inflow measures and flexible counterplan to contagious diseases are necessary in the car-free pedestrian street policy.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.26-36
• /
• 2008

Currently, the pedestrian signal timing model has no consideration on the characteristics of different land use patterns and pedestrian behaviors during pedestrian signal timing calculation. This study intended to propose pedestrian signal timing models that could reflect the inherent characteristics of pedestrian and land use patterns. For this study, three major variables affecting the length of signal timing were identified: walking speed, perception-reaction time, and density-delay time. Then, the representative values of each variable were estimated through the field studies. By combining this information, several pedestrian signal timing models were developed. The data in this paper can be used for future references, and the walking environments for pedestrians could be improved by applying the models suggested in this paper.

• International Journal of High-Rise Buildings
• /
• v.11 no.4
• /
• pp.315-320
• /
• 2022

With the rapid development of urbanization the problems of pedestrian-level wind comfort and natural ventilation of tall buildings are becoming increasingly prominent. The velocity at the pedestrian level ($\overline{MVR}$) and variation of wind pressure coefficients $\overline{{\Delta}C_p}$ between windward and leeward surfaces of tall buildings were investigated systematically through numerical simulations. The examined parameters included building density ρ, height ratio of building α_H, width ratio of building α_B, and wind direction θ. The linear and quadratic regression analyses of $\overline{MVR}$ and $\overline{{\Delta}C_p}$ were conducted. The quadratic regression had better performance in predicting $\overline{MVR}$ and $\overline{{\Delta}C_p}$ than the linear regression. $\overline{MVR}$ and $\overline{{\Delta}C_p}$ were optimized by the NSGA-II algorithm. The LINMAP and TOPSIS decision-making methods demonstrated better capability than the Shannon's entropy approach. The final optimal design parameters of buildings were ρ = 20%, α_H = 4.5, and α_B = 1, and the wind direction was θ = 10°. The proposed method could be used for the optimization of pedestrian-level wind comfort and natural ventilation in a residential area.