• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.720-723
• /
• 1996

The recent summer power peak crisis has been caused by excessive use of cooling loads at daily peak time in summer. The yearly load shape of KEPCO has gradually became very steep valley. Under this situation, more efficient DSM(Demand Side Management) tools are fully required for summer peak clipping and shaving. In this paper, the KEPCO's Jeju-Do model project for DSM, especially for Demand Controller, is presented. Demand Controller was evaluated to have the very high economical efficiency against the investment in equipment, as compared with another DSM tools. There were some serious problem to apply Demand Controller to many customers in the aspect to synchronization with KEPCO's watthour meter. But these problems have solved by Keyin's new Demand Controller using vision algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.10
• /
• pp.13-18
• /
• 2007

• MALSORI
• /
• no.60
• /
• pp.67-84
• /
• 2006

The purpose of this study is to find some acoustic parameters on frequency domain to distinguish the Korean nasals, $/m,\;n,\;{\eta}/$ from each other. The new parameters are devised on the basis of LTAS (Long Term Average Spectrum). The maximum peak amplitude and the relevant formant frequency are measured in low and high frequency range, respectively. The frequency of spectral valley and its energy level are also obtained in the specific frequency range of the spectrum. Spectral slope, total energy value in specific frequency range, statistical distribution of spectral energy like centroid, skewness, and kurtosis are suggested as new parameters as well. The parameters that show statistically significant differences across nasals are summerized as follows. 1) in syllable initial positions: the total energy value from 1,500 to 2,200 Hz(zeroENG); 2) in syllable final positions: the peak amplitude of the first formant(peak1_a), the formant frequency with maximum peak amplitude from 4,000 to 8,000 Hz(peak2_f), the maximum peak amplitude of the formant frequency from 4,000 to 8,000 Hz(peak2_a), and the total energy value from 1,500 to 2,200 Hz(zeroENG).

• Proceedings of the KOSOMBE Conference
• /
• v.1989 no.05
• /
• pp.15-18
• /
• 1989

This paper presents a new algorithm for P-wave detection in the ECG signal. We detect the peak and valley point using significant point extraction algorithm with 9-point derivative. Because P-wave duration is changed according to heart-rates, we search for the R-peak and calculate the R-R interval time prior to the determination of P-wave duration threshold values in order to actively adapt to the change of P duration. We determine the parameters for P-wave detection and then P-peak, P-onset and P-offset are detected by these parameters. The results obtained from the proposed algorithm have detected successively P-wave almost more than 90%.

• Geomechanics and Engineering
• /
• v.13 no.3
• /
• pp.411-429
• /
• 2017

A Spectral Element Method for 3D seismic wave propagation simulation is derived based on the three-dimensional fluctuating elastic dynamic equation. Considering the 3D real terrain and the attenuation characteristics of the medium, the topographic effect of Wenchuan earthquake is simulated by using the Spectral Element Method (SEM) algorithm and the ASTER DEM model. Results show that the high PGA (peak ground acceleration) region was distributed along the peak and the slope side away from the epicenter in the epicenter area. The overall distribution direction of high PGA and high PGV (peak ground velocity) region is parallel to the direction of the seismogenic fault. In the epicenter of the earthquake, the ground motion is to some extent amplified under the influence of the terrain. The amplification effect of the terrain on PGA is complicated. It does not exactly lead to amplification of PGA at the ridge and the summit or attenuation of PGA in the valley.

• Food Science and Biotechnology
• /
• v.18 no.4
• /
• pp.855-860
• /
• 2009

Physicochemical properties of starches isolated from 3 new potato cultivars developed by Potato Valley Ltd. were investigated and compared to those of starch isolated from 'Superior' being distributed prominently in Korea. Significant differences were observed in physicochemical properties such as granule size, amylose content, phosphorus content, water binding capacity, swelling power, solubility, and in vitro digestibility of starches from different potato cultivars. Thermal properties were evaluated using differential scanning calorimetry (DSC), and onset gelatinization temperatire ($T_o$), peak temperature ($T_p$), and enthalpies of gelatinization (${\triangle}H$) of different potato cultivars ranged as $58.0{\pm}0.3-61.7{\pm}0.4^{\circ}C,\;63.7{\pm}0.2-$ $66.5{\pm}0.0^{\circ}C$, and $15.6{\pm}0.5-17.0{\pm}0.3$ J/g, respectively. Pasting properties were evaluated using a rapid visco analyzer (RVA), and pasting temperature, peak viscosity, and final viscosity of different potato cultivars ranged as $65.0{\pm}0.1-68.9{\pm}0.1^{\circ}C$, $8,163.7{\pm}196.3-9,035.7{\pm}6.4$ cp, and $4,397.7{\pm}166.7-7,025.0{\pm}271.3$ cp, respectively. Especially, 'Gogu valley' starch showed the highest values in the amylose and phosphorus content among tested potato cultivars and higher water binding capacity, swelling power, and solubility than those of other tested starches. And it also showed high pasting temperature, peak viscosity, trough viscosity, and final viscosity as compared to other tested starches.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.1
• /
• pp.59-65
• /
• 2018

A new single-stage flyback power converter with PFC for electrolytic capacitor-less LED driver is proposed in this study. This method minimizes the peak-to-average ratio of the LED driving pulsating current by adding the LED driving current near the LED current valley area, as well as the third harmonic component injection into the input current. The reduced peak current value of the LED drive current minimizes the thermal stress of the LED itself, thereby increasing the reliability of the LED, as well as achieving a long lifetime. Simulation and experimental results show the usefulness of the proposed topology.

• Journal of The Geomorphological Association of Korea
• /
• v.15 no.2
• /
• pp.95-109
• /
• 2008

This work is to describe the geomorphological features of Dongcheon-gugok in the Eastern Part of Gyeongsang Province, and attempt to develop a basic data for traditional natural heritage. The bedrocks of the study area is typically sedimentary rocks of Gyeongsang Series. Dongcheon-gugok in the study area is almost distributed in the valley of Taebaek Mountain range in Gyeongbuk Province. These valleys almost belong to tributaries of Nakdong River, and are characterized by narrow meandering valley in the moutainous region. Dongcheon-gugok in the study area is located in these valleys with steep slopes or rocky cliffs. And there are pools, point-bar with sands and gravels, riffles, etc in the river valley. Ancesters named these landscape with Jeolbyuk(rocky cliff), Bong(peak), Dam(pool), Tan(ripple), Cheonsa(point-bar), Pok(waterfall), Dae(hill), etc.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.2
• /
• pp.79-86
• /
• 2011

Cold-air drainage and pooling occur in most mountain valleys at night. Local climates with cold-air pooling could affect phenology and distribution of crop plants. A high resolution infrared imaging radiometer was used to visualize the cold-air drainage and thermal belt formation over a small mountainous watershed (ca. $10{\times}5{\times}1$ km for the maximum length${\times}$width${\times}$depth). Thermal images on $640{\times}480$ pixels were scanned across the Akyang valley (south of Mt. Jiri National Park) by the radiometer installed at a local peak ('Hyongjebong', 1,117 m a.s.l.) at dawn of 17 May 2011, when the synoptic condition was favorable for the surface cooling and cold-air drainage. Major findings are: (1) Cold-air drainage and accumulation was clearly identified by the lowest brightness temperature mainly at the valley bottom. (2) So-called 'thermal belt' with higher brightness temperature was found partway up the valley sidewalls and showed up to $5^{\circ}C$ departure from the valley bottom temperature. (3) Digital thermography showed feasibility for validation of the high definition geospatial temperature models currently in use for the plot-specific agrometeorological service.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.2
• /
• pp.134-137
• /
• 2019

A wide-bandwidth current controller is required for fast charging/discharging of super capacitor applications. Peak current mode is generally used to accomplish fast charging/discharging because this mode has fast response characteristics. However, the peak current mode control must have a slope compensation function to restrain sub-harmonics oscillation. The slope must be changed accordingly if the controlled output voltage is varied. However, changing the slope for every changed output voltage is not easy. The other solution, selecting the slope as the maximum value, causes a slow response problem to occur. Therefore, we propose a hybrid mode controller that uses a peak current and a newly specified valley current. Through the proposed hybrid mode control, the sub-harmonic oscillation does not occur when the duty is larger than 0.5 because of the fast response.