• 대한음성학회:학술대회논문집
• /
• 대한음성학회 1996년도 10월 학술대회지
• /
• pp.390-398
• /
• 1996

Acoustic analysis study was performed on 20 normal subjects by speaking nonsense syllables composed of Korean bilabial stops(/p, $p^{*}$/, ph/) and their Preceding and/or following vowel /a/(that is, [pa, $p^{*}a$, pha, apa, $ap^{*}a$, apha]) with an ultraminiature pressure sensor in their mouths. Speech materials were phonated twice, once with a moderate voice, another time with a loud voice. The acoustic signal and intraoral pressure were recorded simultaneously on computer. By these procedures, we were to measure the intraoral pressure, closure duration and VOT of Korean bilabial stops, and to compare the values one another according to the intensity of phonation and the position of the target consonants. Intraoral pressure was measured by the peak intraoral pressure value of its wave; closure duration by the time interval between the onset of intraoral pressure build-up and the burst meaning the release of closure; Voice onset time(VOT) by the time interval between the burst and the onset of glottal vibration. Heavily aspirated bilabial stop consonant /ph/ showed the highest intraoral pressure value, unaspirated /p$^{*}$/, the second, slightly aspirated /p/, the lowest. The syllable initial bilabial stops showed higher intraoral pressure than word initial stops, and the value of loudly phonated consonants were higher than moderate consonants. The longest closure duration period was that of /$p^{*}$/ and the shortest, /p/, and the duration was longer in word initial position and in the moderate voice. In VOT, the order of the longest to shortest was /ph/, /p/, /$p^{*}$/, and the value was shorter when the consonant was in intervocalic position and when it was phonated with a loud voice.

• Geomechanics and Engineering
• /
• 제30권5호
• /
• pp.401-411
• /
• 2022

To obtain the dynamic mechanical properties, fracture modes, energy and brittleness characteristics of Furong Baijiao coal rock, the dynamic impact compression tests under 0, 4, 8 and 12 MPa confining pressure were carried out using the split Hopkinson pressure bar. The results show that failure mode of coal rock in uniaxial state is axial splitting failure, while it is mainly compression-shear failure with tensile failure in triaxial state. With strain rate and confining pressure increasing, compressive strength and peak strain increase, average fragmentation increases and fractal dimension decreases. Based on energy dissipation theory, the dissipated energy density of coal rock increases gradually with growing confining pressure, but it has little correlation with strain rate. Considering progressive destruction process of coal rock, damage variable was defined as the ratio of dissipated energy density to total absorbed energy density. The maximum damage rate was obtained by deriving damage variable to reflect its maximum failure severity, then a brittleness index BD was established based on the maximum damage rate. BD value declined gradually as confining pressure and strain rate increase, indicating the decrease of brittleness and destruction degree. When confining pressure rises to 12 MPa, brittleness index and average fragmentation gradually stabilize, which shows confining pressure growing cannot cause continuous damage. Finally, integrating dynamic deformation and destruction process of coal rock and according to its final failure characteristics under different confining pressures, BD value is used to classify the brittleness into four grades.

• 한국도로학회논문집
• /
• 제14권2호
• /
• pp.93-99
• /
• 2012

선행 차량과의 상대속도에 따른 차두거리 분포에 관한 연구를 위해 연속류 도로 중 국도에 설치된 차량검지기(VDS, Vehicle Detection System)의 교통정보 수집자료를 분석하였다. 수집자료를 차선별, 방향별로 정렬하여 선행 차량과 후행 차량 사이의 속도차이인 상대속도와 검지기 통과시간 및 차량의 속도를 이용하여 차두거리를 산출하였다. 모든 시간대를 대상으로 산출된 상대속도와 차두거리의 분석을 통해 두 변수간의 관계를 분석한 결과 고르게 분포하고 있는 것으로 나타났고 동일차량군 주행에서 차두거리의 중간값은 약 40m이며, 이는 자료구축 및 분석부분에서 언급한 A~D영역을 분류함에 있어 기준이 될 수 있었다. 시간대에 따른 차두거리 분포에 대한 분석을 위해 수집된 모든 자료의 교통량을 통해 첨두교통량을 산정하고 이를 기준으로 첨두시간과 비첨두시간을 분류하여 차두거리 분포의 차이를 분석하였다. 첨두시간은 비첨두시간에 비해 상대적으로 앞 차량과의 속도 차이가 적고 차두거리가 좁은 것으로 나타났기 때문에 선행차량과 같은 주행 패턴으로 추종한다고 할 수 있고 비첨두시간는 차두거리가 상대적으로 넓은 것으로 나타났다. 이는 운전자의 행태를 나타낼 수도 있는 것으로 차두거리가 좁을수록 공격적인 운전을 하며 본인의 총 통행시간을 줄이고자 하는 욕구가 크다고 미루어 짐작할 수 있겠다. 하지만 여가통행과 비첨두시간의 경우는 첨두시간에 비해 차두거리가 넓은 것으로 미루어보아 시간적 압박이 적어 상대적으로 여유로운 운전행태를 보인다고 할 수 있겠다.

• 한국운동역학회지
• /
• 제21권4호
• /
• pp.487-494
• /
• 2011

The purpose of this study was to evaluate the effects of metatarsal pad (MP) compared with barefoot and MP with using different insoles on gait. 15 healthy females who had no history of injury in the lower extremity with an average age of 22.7 year(SD=1.35), height of 160 cm(SD=3.4), weight of 48.8 kg(SD=5.52) and average foot size of 232.5 mm(SD=6.8) participated in this study as the subjects. The subjects walked on a treadmill under four different experimental conditions: 1) walking with barefoot, 2) walking wearing MP 3) walking wearing a soft insole with MP(SIMP), 4) walking wearing a rigid insole with MP(HIMP). During walking, foot pressure data such as force, contacting area, peak pressure, and mean pressure was collected using Pedar-X System(Novel Gmbh, Germany) and EMG activity of lower limb muscles such as tibialis anterior(TA), lateral gastrocnemius(LG), rectus femoris(RF), and musculus biceps femoris(MBF) was gathered using Delsys EMG Work System(Delsys, USA). Collected data was then analyzed using paired t-test in order to investigate the effects of each of experimental conditions. As a result of the analysis, when MP and HIMP were equipped, overall contacting area was increased while the force, peak pressure and the mean pressure were decreased. Especially, when the SIMP was equipped, every data were significantly decreased. In case of EMG, wearing MP, SIMP and HIMP made three muscles(TA, LG, RF)'s activity decrease. A result of the analysis will be able to apply for manufacturing functional shoes, diabetes shoes, senior shoes and lower extremity orthosis. Significance of the study due to a metatarsal pad and the insole is to analyze the changes in muscle strength.

• 대한간호학회지
• /
• 제26권1호
• /
• pp.148-164
• /
• 1996

The effect of circumvaginal muscle(CVM) exercises to improve sexual function in married women has not been investigated by currently acceptable research methods, nor have appropriate instruments and techniques to carry out such investigation been available. The purpose of this research was to study the effect of CVM exercise on sexual function, and of measuring CVM function after CVM exercises. The research tools used were a modified Derogates Sexual Function Inventory questionnaire and a pressure sensitive intravaginal balloon device. This research was conducted in Kwangju-city and Chonnam province, Korea from July, 1994 to July, 1995. The research used a non-equivalent control pre-post test quasi-experimental design. Forty-five healthy married female volunteers, aged 30-58, and were randomly assigned by age using the matching fixed-length blocks to two groups. The experimental group consisted of 21 women who were assigned a 25-minute per day CVM home exercise program for six weeks. The control group of 24 women did not do the CVM home exercises. The CVM home exercise was developed by Dougherty(1989a) and adopted to Korea by Lee (1993). Data were analyzed by $x^{2-}$test, Paired t-test, Spearman product-moment correlation using SAS /P $C^+. The results are summarized as follows : 1. There were no significant differences in the characteristics of the subjects between the experimental and control groups before the CVM home exercises. 2. Hypothesis 1 that married women who participated in CVM home exercises would have higher mean scores on the sexual function(SF) than in those who did not participate in home exercise was supported. 3. Hypothesis 2 that married women who participated in CVM home exercises would have higher vaginal pressure on SF than in those who did not participate in home exercises was supported (mean maximum pressure, t＝－7.338, P＜.0001, peak maximum pressure, t＝－11.164, P＜.0001). 4. Hypothesis 3 that the more often(number of days) and the more frequent (numbers of time per day) that married women do CVM home exercise, the higher their mean scores on SF and vaginal pressures was supported（r＝0.233, P＜.01 ; r＝0.352, P＜.05）. A six week CVM home exercise program using a tape recording showed that SF can be improved. Results of this study showed that married women who exercise on a regular basis for six weeks improve their sexual function and increase the mean vaginal pressure and peak maximum pressure (tested by electronic monitor). In conclusion, CVM exercise is effective in increasing SF.SF.

• 한국재료학회지
• /
• 제12권11호
• /
• pp.870-874
• /
• 2002

$Mg_2$$SiO_4$: Dy, Tb pellets were made by using a sintering process, including pressing and heat treatment. In the present study, the optimum parameters of the sintering for the $Mg_2$$SiO_4$: Dy, Tb pellets obtained such as the pressing pressure, the sintering temperature and the sintering time were in terms of thermoluminescence. Experimental results showed that the main peak of the glow curve for $Mg_2$$SiO_4$: Dy, Tb thermoluminescence dosimeter was clearly correlated with the energy of the UV and with the grain size. The intensity of the TL glow curve increased and its main peak position shifted to lower temperature with increasing UV irradiation time.

• Nuclear Engineering and Technology
• /
• 제26권3호
• /
• pp.389-400
• /
• 1994

FLECHT SEASET 실험 데이터를 사용하여 대형 냉각재 상실 사고시 재관수 첨두 피복재 온도에 대한 RELAP5 /MOD3/KAERI의 예측능력을 평가하였으며, 관련 불확실성을 통계적으로 정량화 하였다. 중력구동 재관수 실험및 광범위한 재관수율, 시스템 압력, 초기 피복재 온도, 연료봉 출력을 포괄하는 강제구동 재관수 실험들로 구성된 18개의 실험이 평가에 사용되었다. 평가 결과 재관수 첨두 피복재 온도에 대해 평균 7.56 K 낮게 예측하였으며 이를 포함한 관련 불확실성의 상한은 95% 신뢰도 수준에서 약 99 K로 정량화 되었다.

• 대한기계학회논문집B
• /
• 제28권2호
• /
• pp.181-188
• /
• 2004

The frequency characteristics in an axial flow fan operating at a design and three off-design operating conditions have been investigated by measuring the velocity fluctuation of a tip leakage vortex and a wake flow. Two hot-wire probe sensors rotating with the fan rotor. a fixed and a moving ones, were introduced to obtain a cross-correlation coefficient between two sensors as well as the fluctuating velocity. The results show that the spectral peaks due to the fluctuating velocity near the rotor tip are mainly observed in the reverse flow region of higher flow rates than those in the peak pressure operating condition. However, no peak frequency presents near the rotor tip for near stall condition. Detailed wake flow just downstream of the rotor blade was also measured by the rotating hot-wire sensor. The peak frequency of a high velocity fluctuation due to Karman vortex shedding in the wake region is mainly observed at the higher flow rate condition than that in the design point.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.119-119
• /
• 1999

GaN-based 물질들은 blue와 UV 영역의 LED, LD와 같은 광소자가 상용화되었을 뿐만아니라 HBT, FET와 같은 전기소자로도 널리 응용될 시점이지만 아직까지 해결되지 않은 문제점들이 있다. 그 중에 하나가 바로 GaN의 격자상수와 일치하는 기판이 없어 발생하는 dislocation인데, 이를 해결하기 위한 방법으로 새로운 기판이나, buffer, 또는 새로운 성장방법(ELOG) 등을 시도하고 있으나 dislocation density는 아직 높은 (107~1010cm-2) 상태이다. 이에 본 연구에서는 dislocation을 줄이기 위한 방책으로 InxGa1-xN를 새로운 buffer층으로 사용하여 GaN 박막을 MBE 방법으로 성장하였다. InxGa1-xN를 선택한 이유는 GaN와의 격자상수차이가 In0.12Ga0.88N일 경우 거의 일치한다는 보고가 있으며, 특히 InGaN의 melting point는 GaN의 성장온도 보다는 약간 높기 때문에 GaN 박막을 성장할 때와 식힐 때의 InGaN 원자결합은 약하게 작용되며, 결국 이는 열적인 stress를 줄여주게 된다. 이와 같이 성장된 GaN 박막은 그 결정성을 XRD로 분석하였고, 표면과 계면을 SEM으로 관찰하였다. 그리고 그 광학적 특성을 저온 PL로서 조사하였다. 그 결과를 살펴보면 35$^{\circ}$ 근방에서 GaN(0002) peak가 나온 것으로 보아 wurtzite 구조가 성장됨을 XRD로부터 확인하였다. 그리고 저온 (12K) PL에서는 3.470eV의 D$^{\circ}$X peak뿐만 아니라 3.258eV에 해당하는 peak를 얻었는데, 이는 InxGa1-xN buffer layer의 vapour pressure가 높은 (<50$0^{\circ}C$)에 도달하게 됨으로써 dissociation이 일어나면서 초기 성장이 이루어졌고 이는 다시 계면에서의 inter-diffusion을 발생시킨 것으로 보여진다.

• Geomechanics and Engineering
• /
• 제20권6호
• /
• pp.547-556
• /
• 2020

An understanding of the influence of MR (Magmatic Rock) thickness on the surrounding rock behaviors is essential for the prevention and management of dynamic disasters in coal mining. In this study, we used FLC3D to study the breaking and instability laws of surrounding rock with different MR thicknesses in terms of strata movement, stress and energy. The mechanism of dynamic disasters was revealed. The results show that the thicker the MR is, (1) the smaller the subsidence of the overlying strata is, but the subsidence span of the overlying strata become wider, and the corresponding displacement deformation value of the basin edge become smaller. (2) the slower the growth rate of abutment pressure in front of the working face is, but the peak value is smaller, and the influence range is larger. The peak value decreases rapidly after the breaking, and the stress concentration coefficient is maintained at about 1.31. (3) the slower the peak energy in front of coal wall, but the range of energy concentration increases (isoline "O" type energy circle). Finally, a case study was conducted to verify the disaster-causing mechanism. We anticipate that the research findings presented herein can assist in the control of dynamic hazards.