• Journal of Life Science
• /
• v.26 no.11
• /
• pp.1259-1268
• /
• 2016

In this study, we investigated antimicrobial peptide from the acidified muscle extract of Mytilus coruscus, which mostly inhabits China, Japan, and Korea, to develop a natural product-derived antibiotics substitution in terms of its abuse and restriction. Antimicrobial peptide was purified by $C_{18}$ reversed-phase high-performance liquid chromatography and was detected as having a molecular mass of 6,701 Da by MALDI-TOF/MS. The N-terminal amino acid sequence of the purified peak was obtained from edman degradation, and 20 identified residues shown 100% identity with the N-terminus region of sperm-specific protein and protamine-like PL-II/PL-IV precursor of Mytilus californianus. We also identified 60 open-reading frame (ORF) encoding amino acids with 183 bp of purified peptide based on the obtained amino acid residues. The amino acid sequence of ORF showed 100% and the nucleotide sequence revealed 97.2% identity with the protamine-like PL-II/PL-IV precursor of Mytilus californianus. Synthesized antimicrobial peptide showed antimicrobial activity against gram-positive bacteria, including Bacillus cereus (minimal effective concentration [MEC], $20.8{\mu}g/ml$), Bacillus subtilis (MEC, $0.2{\mu}g/ml$), Streptococcus mutans (MEC, $0.2{\mu}g/ml$), gram-negative bacteria including Pseudomonas aeruginosa (MEC, $5.7{\mu}g/ml$), Escherichia coli (MEC, $2.6{\mu}g/ml$) and fungi, Candida albicans (MEC, $56.3{\mu}g/ml$). In addition, synthesized peptide showed stable activities under heat and salt conditions against gram-positive and gram-negative bacteria, but was inhibited by salt against only C. albicans. With these results, isolated peptide from M. coruscus could be an alternative agent to antibiotics for defending against pathogenic microorganisms, and helpful information to understand the innate immune system of marine invertebrates.

• Journal of Food Hygiene and Safety
• /
• v.35 no.3
• /
• pp.225-233
• /
• 2020

By the standards and specifications for hygiene products, three test methods for formaldehyde are specified for each item type of hygiene product. After derivatization using acetylacetone and 2,4-dinitrophenylhydrazine (2,4-DNPH), formaldehyde is analyzed by spectrophotometer and high-performance liquid chromatography (HPLC). Validation of the three test methods was performed on tissue, diaper lining and waterproof layer, and panty liner products. The results of linearity (R²), limit of detection (LOD), limit of quantification (LOQ), recovery rate (%) and reproducibility (%), showed that all three methods are suitable for analyzing formaldehyde in hygiene products. After derivatization with 2,4-DNPH and cetylacetone, formaldehyde was analyzed at 0, 3, 6, 9, 24 and 48 hours by HPLC. Formaldehyde derivatized with 2,4-DNPH showed no statistically significant change in formaldehyde peak area over time (P>0.05). But, acetylacetone-derivatizated formaldehyde showed a negative correlation coefficient (r) over time (P<0.01). We investigated the residual amounts of formaldehyde in 205 hygiene products distributed in Busan. Among 74 disposable diaper products tested, 73 had low concentrations of formaldehyde (0.13-29.87 mg/kg). Moreover, formaldehyde was not detected in any of 78 tissue, 27 disposable paper towel, 12 disposable dishcloth, 7 paper cup, one brand of paper straw and 6 disposable napkin products.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.730-737
• /
• 2006

High performance liquid chromatographic methods for the simultaneous determination of 12 biogenic amines were developed and contents of biogenic amines in 23 varieties of Korean commercial fermented food were analyzed. Dansyl derivatives of biogenic amine were very stable and had good peak resolution. Except agmatine, the recovery of biogenic amines from soybean paste with extraction of 0.1 N HC1 added biogenic amines to soybean paste was greater 85%. The calibration curve showed good linearity over a concentration range up to 50 ${\mu}g/mL$. In the determination of biogenic amine level in Korean commercial fermented foods, doenjang and chungkukjang (fermented soybean pastes), soy sauce, anchovy and pacific sand lance liquid jeotkal (fermented fish sauce products), and cabbage kimchi had high level biogenic amines. Especially, traditional doenjang had a histamine (HIS) level of 952.0 mg/kg, a tyramine (TYR) level of 1,430.7 mg/kg. Most cheese had low level of biogenic amines, but one Gouda cheese had a tyramine (TYR) level of 97.5 mg/kg. A low level of biogenic amines was detected in wines, beer, yoghurt, and sausage. Putrescine (PUT), cadaverine (CAD), tryptamine (TRY), histamine (HIS), tyramine (TYR), and 2-phenylethylamine (PHE) were mainly formed in fermented foods by the action of microorganism, so their levels were high with a range. On the other hand, spermidine (SPD), spermine(SPM), serotonin (SER), noradrenaline (NOR), and dopamine (DOP) were formed originally via biosynthesis with consequent low level.

• Korean Journal of Poultry Science
• /
• v.33 no.3
• /
• pp.225-231
• /
• 2006

To investigate the effect of feeding rare earth (RE) on the performance of breeder hens a feeding trial with sixteen thousands of 158 day old Ross broiler breeder hens was conducted for thirty weeks. A mixture of RE- chlorides containing mainly La, Ce, and Pr was mixed into corn-soy based diet at two levels, 300 and 600 mg/kg, All the hens were housed in flat layer houses and the ratio of male to female was maintained at one to ten. Dietary supplementation of the of RE at a level of 300 mg/kg made the hens reach egg production peak higher by about 6% and earlier by about two weeks. As a result, it made higher hatchable egg production by 3.5%. It also reduced dramatically the mortality of both male and female breeders(P<0.05). Egg weight was slightly increased but egg qualify was not much influenced by dietary supplementation of RE. Egg albumin hight and Haugh unit were significantly improved while egg shell thickness, egg breaking strength and yolk color were similar to those of the control. Experimental results appeared to show a good possibility that egg fertility and hatchability were improved by feeding RE. Dietary supplementation of RE at a level of 300 mg/kg should be acceptable but not the 600 mg/kg level for breeder hens. Further studies on the effect of RE on egg fertility and hatchability appears to be necessary.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.4
• /
• pp.105-113
• /
• 2003

Successful operation of a reactor can be accomplished when it is operated at proper D depending on the state of degradation. Operation at high D leads to the washout of biomass in the reactor while operation at low D leads to product inhibition due to the accumulation of excess VFA. These appear to limit the production of hydrogen to reach a higher level. Operation by D control was performed to improve the efficiency of hydrogen fermentation of food waste. Although simple organic matters were rapidly degraded in the early stage (day 1-2), proper VFA concentration and pH values were kept in the reactor at D of $4.5d^{-1}$, which was previously reported to be optimum initial D. High butyrate/acetate (B/A) ratios over 3.2 were obtained. Without D control, the reduction of simple organic matters after day 2 caused the decrease of VFA production and the increase of pH. Hydrogen production also decreased, as microbial proliferation was less than microbial loss by washout. However, the reactor performance was dramatically improved at D control from 4.5 to $2.3d^{-1}$. It showed the highest B/A ratios over 2.0 among the reactors on day 4-7. The second hydrogen peak appeared on day 4, resulting in the highest fermentation efficiency (70.8%) among the reactors. It was caused by the enhanced degradation of slowly degradable matters. The COD removed was converted to hydrogen (19.3%), VFA (36.5%), and ethanol (15.0%). Therefore, the strategy using D control, depending on the state of degradation, was effective in improving the efficiency of hydrogen fermentation.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2005

The Korean VLBI Network (KVN) will open a new field of research in astronomy, geodesy and earth science using the newest three Elm radio telescopes. This will expand our ability to look at the Universe in the millimeter regime. Imaging capability of radio interferometry is highly dependent upon the antenna configuration, source size, declination and the shape of target. In this paper, imaging simulations are carried out with the KVN system configuration. Five test images were used which were a point source, multi-point sources, a uniform sphere with two different sizes compared to the synthesis beam of the KVN and a Very Large Array (VLA) image of Cygnus A. The declination for the full time simulation was set as +60 degrees and the observation time range was -6 to +6 hours around transit. Simulations have been done at 22GHz, one of the KVN observation frequency. All these simulations and data reductions have been run with the Astronomical Image Processing System (AIPS) software package. As the KVN array has a resolution of about 6 mas (milli arcsecond) at 220Hz, in case of model source being approximately the beam size or smaller, the ratio of peak intensity over RMS shows about 10000:1 and 5000:1. The other case in which model source is larger than the beam size, this ratio shows very low range of about 115:1 and 34:1. This is due to the lack of short baselines and the small number of antenna. We compare the coordinates of the model images with those of the cleaned images. The result shows mostly perfect correspondence except in the case of the 12mas uniform sphere. Therefore, the main astronomical targets for the KVN will be the compact sources and the KVN will have an excellent performance in the astrometry for these sources.

• Journal of radiological science and technology
• /
• v.37 no.3
• /
• pp.187-193
• /
• 2014

The purpose of this study was to analyze the effect on the selectivity on of high-voltage rectification device that measured the performance of the grid, and the contrast improvement ability (K factor) by measuring the scattered radiation content of the transmitted X-rays. The scattered radiation generated when the X-ray flux comes from the diagnostic X-ray generator that passes through an object. Targeting four different rectifications of X-ray generators, the mean value of the tube voltage and the tube current was measured in order to maximize the accuracy of the generating power dose within the same exposure condition. Using fluorescence meter, the content of the scattered rays that are transmitted through the acrylic was measured depending on the grid usage. When grid is not used, the content of the scattered rays was the lowest (34.158%) with the single-phase rectifier, was increased with the inverter rectifier (37.043%) and the three-phase 24-peak rectification method (37.447%). The difference of the scattered radiation content of each device was significant from the lowest 0.404% to the highest 3.289% while using 8:1 grid, the content of the scattered ray was the lowest with the single content of the scattered ray was the lowest with the single-phase rectifier (18.258%), was increased with the rectifier (25.502%) and the 24-peaks rectification (24.217%). Furthermore, there was difference up to content 7.244% to the lowest content 1.285% within three-phase 24-peaks rectification, inverter rectifications, and single-phase rectifier depending on the selectivity of the grid. Drawn from the statistical analysis, there was a similar relationship between the contrast improvement factor and the K factor. As a result, the grid selectivity and the contrast were increased within the single-phase rectifier rather than the constant voltage rectifier.

• Korean Journal of Remote Sensing
• /
• v.27 no.5
• /
• pp.613-623
• /
• 2011

This study assessed the feasibility to apply Two-band and Three-band reflectance models for chlorophyll-a estimation in turbid productive waters whose scale is smaller and narrower than ocean using a high spatial resolution image. Those band ratio models were successfully applied to analyzing chlorophyll-a concentrations of ocean or coastal water using Moderate Imaging Spectroradiometer(MODIS), Sea-viewing Wide Field-fo-view Sensor(SeaWiFS), Medium Resolution Imaging Spectrometer(MERIS), etc. Two-band and Three-band models based on band ratio such as Red and NIR band were generally used for the Chl-a in turbid waters. Two-band modes using Red and NIR bands of RapidEye image showed no significant results with $R^2$ 0.38. To enhance a band ratio between absorption and reflection peak, We used red-edge band(710 nm) of RapidEye image for Twoband and Three-band models. Red-RE Two-band and Red-RE-NIR Three-band reflectance model (with cubic equation) for the RapidEye image provided significance performances with $R^2$ 0.66 and 0.73, respectively. Their performance showed the 'Approximate Prediction' with RPD, 1.39 and 1.29 and RMSE, 24.8, 22.4, respectively. Another three-band model with quadratic equation showed similar performances to Red-RE two-band model. The findings in this study demonstrated that Two-band and Three-band reflectance models using a red-edge band can approximately estimate chlorophyll-a concentrations in a turbid river water using high-resolution satellite image. In the distribution map of estimated Chl-a concentrations, three-band model with cubic equation showed lower values than twoband model. In the further works, quantification and correction of spectral interferences caused by suspended sediments and colored dissolved organic matters will improve the accuracy of chlorophyll-a estimation in turbid waters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Journal of Preventive Medicine and Public Health
• /
• v.25 no.2 s.38
• /
• pp.141-147
• /
• 1992

This study was carried out not only to determine blood alcohol levels by time but also to examine the changes of working ability and reaction speed after ingestion of alcohol. Fifteen healthy students aged from 21 to 27 volunteered as subjects for this study, Liguor (Sojoo) in concentration of 25% ethyl alcohol was administrated with the amount of 1ml of ethyl alcohol per kg of body weight to the subjects. The concentration of alcohol in the blood were determined by the 'Alcohol Sensor 100' at 5, 30, 60 and 90 minutes after the administration of alcohol. Also, the choice reactiontest, the eye-hand coordination test and kraepelin test were examined at the same time after checking of alcohol concentration in the blood. The results of this study can be summarized as follows. 1. Mean blood alcohol level changes resulting from administration of 1ml of ethyl alcohol per kg of body weight were $0.16%(160{\pm}57mg/100ml,\;0.10%(100{\pm}42mg/100ml),\;0.08%(80{\pm}36mg/100ml)\;and\;0.03%(30{\pm}24mg/100ml)$ at the 3, 30, 60 and 90 minutes after the administration respectively The peak in the concentration of blood alcohol was 5 miniutes after the ingestion according to alcohol examination by the respiration. 2. As for choice reaction test, reaction times became prolonged as blood alcohol levels increased. The reaction time showed a significant changes when the blood alcohol concentration reached 0.08% or more after alcohol ingestion. 3. In eye and hand coordination test, the accuracy of the performance became decreased as blood alcohol levels increased. The difference of accuracy of the test was significantly shown when alcohol levels in the blood reached 0.08% or more after alcohol intake. 4. As for kraepelin test, the abilities of calculation also became lowered as blood alcohol levels increased. The abilities of calculation differed signigicantly from control group when alchool levels of 0.08% and more.