• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.11-13
• /
• 2005

An interior permanent magnet synchronous motor (IPMSM) is receiving increased attention for many industrial applications because of its high torque to inertia ratio, superior power density, and high efficiency. IPMSM is necessary to use the accurate information of the inductance for the precise torque control owing to the reluctance torque. This paper presents two method to measure the each-axis Inductance. The first method uses the peak current that is measured by applying the pulsewise voltage on the each position of IPMSM. The second uses the hysteresis loop of the flux and current measured by applying the positive and negative pulsewise voltage alternately on the each-axis.

• Journal of the Korean institute of surface engineering
• /
• v.22 no.4
• /
• pp.207-214
• /
• 1989

The surface morphology and the proferred orientation of the Pb-Sn alloy electrodeposite were investated by the change of electrolysis conditions in pulse current electroplating. The preferred orientation of Pb-phase in alloy deposits was changed in the sequence of (110)longrightarrow(100)or(100)+(111)longrightarrow(111) with increasing peak current density, while that of $\beta$-Sn phase changed from (321)+(301)to(301)+(111) mixed orientation. The surface morphology was closely related to the preferred orientation of alloy electrodeposits. The alloy deposits, which had (100)or(111) for pb-phase and (321)or(100)(301)for $\beta$-Sn sespectively, showed the surface structure of granular crystallites. The alloy deposits whih mixed orientations for both phases had microstructure of closely the closely stacked crysrallites, which was inclined to the surface.

• Korean Journal of Materials Research
• /
• v.14 no.12
• /
• pp.876-884
• /
• 2004

This study was to investigate whether the bioactivity of the anodized and hydrothermally treated Ti-6Al-7Nb alloy were affected by the time of hydrothermal treatment. Anodizing was performed at current density 30 $mA/cm^2$ up to 300 V in electrolyte solutions containing $DL-{\alpha}-glycerophosphate$ disodium salt hydrate $(DL-{\alpha}-GP)$ and calcium acetate (CA). Hydrothermal treatment was done at $300^{\circ}C$ for 30 min, 1 hr, 2 hrs, and 4 hrs to produce a thin film layer of hydroxyapatite (HA). The bioactivity was evaluated from HA formation on the surfaces in a Hanks' solution with pH 7.4 at $36.5^{\circ}C$ for 10, 20, and 30 days. Anodic oxide films were porous with pore size of $1\sim4{\mu}m\;and\;3\sim4{\mu}m$ thickness. The anodic oxide films composed with strong anatase peak with presence of rutile peak, and showed the increase in intensity of anatase peak after hydrothermal treatment. It was shown that the intensity of anatase peak increased with increasing the time of hydrothermal treatment but was no difference in rutile peak. The corrosion voltage was the highest in the group of hydrothermal treatment for 2 hrs (Ecorr: -338.6 mV). The bioactivity in Hank's solution was accelerated with increasing the time of hydrothermal treatment.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.2
• /
• pp.83-87
• /
• 2006

Poly(acrylic acid) (PAA) was identified to possess good mucoadhesive properties ensuring its application to extend the retention times of the formulations at the oral cavity, intended route of administration using the polymer. In the noncross-linked state, PAA will swell and become eroded owing to the presence of salivary flow from the site of application. The formation of cross-links between the polymer chains will allow swelling but prevents the erosion of the dosage form. In the current study, cross-linking was achieved by esterification of the PAA chains with sucrose. The density of crosslinking was modified by changing sucrose concentration and the duration of cure time. The cross-linking density of the polymer hydrogel was assessed by equilibrium swelling studies. The mucoadhesion testing method allowed a comparative study of the hydrogels prepared. An inverse relationship between equilibrium swelling and peak detachment force showed that increased PAA chain density per unit area enhanced the mucoadhesive interaction.

• Nutrition Research and Practice
• /
• v.4 no.6
• /
• pp.507-514
• /
• 2010

Vitamin K intake has been reported as an essential factor for bone formation. The current study was conducted under the hypothesis that insufficient vitamin K intake would affect inflammatory markers and bone mineral density in young adult women. The study was a cross-sectional design that included 75 women in their 20s. Physical assessments, bone mineral density measurements, 24-hr dietary recalls, and biochemical assessments for high sensitivity C-reactive protein (hs-CRP) and percentages of undercarboxylated osteocalcin (%ucOC) were performed. An analysis of vitamin K nutritional status was performed comparing first, second, and third tertiles of intake based on %ucOC in plasma. Vitamin K intake levels in the first, second, and third tertiles were $94.88{\pm}51.48\;{\mu}g$, $73.85{\pm}45.15\;{\mu}g$, and $62.58{\pm}39.92\;{\mu}g$, respectively (P < 0.05). The T-scores of the first and third tertiles were 1.06 and -0.03, respectively, indicating that bone mineral density was significantly lower in the group with lower vitamin K intake (P < 0.05). There was a tendency for different serum hs-CRP concentrations between the first ($0.04{\pm}0.02$) and third tertiles ($0.11{\pm}0.18$), however this was not statistically significant. Regression analysis was performed to identify the correlations between vitamin K nutritional status, inflammatory markers, and bone mineral density after adjusting for age and BMI. Serum hs-CRP concentrations were positively correlated with vitamin K deficiency status (P < 0.05). And bone mineral density, which was represented by speed, was negatively correlated with vitamin K deficiency status (P < 0.05). In conclusion, status of vitamin K affects inflammatory status and bone formation. Therefore, sufficient intake of vitamin K is required to secure peak bone mass in young adult women.

• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.217-223
• /
• 2010

We grew multi-stacked InAs/$In_{0.1}Ga_{0.9}As$ DWELL (dot-in-a-well) structure by metal organic chemical vapor deposition and investigated optical properties by photoluminescence and I-V characteristics by dark current measurement. When stacking InAs quantum dots (QDs) with same growth parameter, the size and density of QDs were changed, resulting in the bimodal emission peak. By decreasing the flow rate of TMIn, we achieved the uniform multi-stacked QD structure which had the single emission peak and high PL intensity. As the growth temperature of n-type GaAs top contact layer (TCL) is above $600^{\circ}C$, the PL intensity severely decreased and dark current level increased. At bias of 0.5 V, the activation energy for temperature dependence of dark current decreased from 106 meV to 48 meV with increasing the growth temperature of n-type GaAs TCL from 580 to $650^{\circ}C$. This suggest that the thermal escape of bounded electrons and non-radiative transition become dominant due to the thermal inter-diffusion at the interface between InAs QDs and $In_{0.1}Ga_{0.9}As$ well layer.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.1053-1064
• /
• 2022

The Thiessen method, which is the current area average precipitation method, has serious structural limitations in accurately calculating the average precipitation in the watershed. In addition to the observation accuracy of the precipitation meter, errors may occur in the area average precipitation calculation depending on the arrangement of the precipitation meter and the direction of the heavy rain. When the watershed is small and the station density is sparse, in both simulation and observation history, the Thiessen method showed a peculiar tendency that the average precipitation in the watershed continues to increase and decrease rapidly for 10 minutes before and after the peak. And the average precipitation in the Thiessen basin was different from the rainfall radar at the peak time. In the case where the watershed is small but the station density is relatively high, overall, the Thiessen method did not show a trend of sawtooth-shaped over-peak, and the time-dependent fluctuations were similar. However, there was a continuous time lag of about 10 minutes between the rainfall radar observations and the ground precipitation meter observations and the average precipitation in the basin. As a result of examining the ground correction effect of the rainfall radar watershed average precipitation, the correlation between the area average precipitation after correction is rather low compared to the area average precipitation before correction, indicating that the correction effect of the current rainfall radar ground correction algorithm is not high.

• Korean Journal of Materials Research
• /
• v.15 no.2
• /
• pp.134-138
• /
• 2005

This study was performed to investigate the surface properties of electrochemically oxidized pure niobium by anodic oxide and hydrothermal treatment technique. Niobium specimens of $10mm\times10mm\times1.0mm$ in dimension were polished sequentially from $\#600,\;\#800,\;\#1000$ emery paper. The surface of pure niobium sperimens was anodized in an electrolytic solution that was dissolved calcium and phosphate in water. The electrolytic voltage was set in the range of 250 V and the current density was $10mA/cm^2$. The specimen was hydrothermal treated in high-pressure steam at $300^{\circ}C$ for 2 hours using an autoclave. And all specimens were immersed in the in the Hanks' solution nth pH 7.4 at $37^{\circ}C$ for 30 days. The surface of specimen was characterized by surface roughness, scanning electron microscope(SEM), energy dispersion X-ray analysis(EDX), X-ray photoemission spectroscopy(XPS) test. The value of surface roughness was the highest in the anodized sample and $0.41{\pm}0.04\;{\mu}m$. The results of the SEM observation show that oxide layers of the multi porosity in the anodized sample were piled up on another, and hydroxyapatite crystal was precipitate from the surface of the hydrothermal treated sample. In the XPS analysis, O, Nb, C peak and small amounts of N peak were found in the polished specimens while Ca and P peak in addition to O, Nb, C and peak were observed in the hydrothermal treated sample.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.3043-3047
• /
• 2012

To investigate the scattering layer effect of a $TiO_2$ multilayer in dye-sensitized solar cells (DSSCs), we designed a new DSSC system, assembled with a CdS-$TiO_2$ scattering layer electrode. A high-magnification SEM image exhibited hollyhock-like particles with a width of 1.5-2.0 ${\mu}m$ that were aggregated into 10-nm clumps in a hexagonal petal shape. The efficiency was higher in the DSSC assembled with a CdS-$TiO_2$ scattering layer than in the DSSC assembled with $TiO_2$-only layers, due to the decreased resistance in electrochemical impedance spectroscopy (EIS). The short-circuit current density ($J_{sc}$) was increased by approximately 7.26% and the open-circuit voltage ($V_{oc}$) by 2.44% over the 1.0 wt % CdS-$TiO_2$ composite scattering layer and the incident photon-to-current conversion efficiency (IPCE) in the maximum peak was also enhanced by about 5.0%, compared to the DSSC assembled without the CdS-$TiO_2$scattering layer.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1674-1681
• /
• 2015

This paper presented an improved analytical method for calculating armature-reaction field in the surface-mounted permanent magnet machines accounting for opening slots. The analytical model is divided into two types of subdomains. The current of the armature is centralized in the center of the slots. The field solution of each subdomain is obtained by applying the interface and boundary conditions of the model. Two 30-pole/36-slot prototype machines with different slot-opening width are used for validation. The FE (finite element) results confirm the validity of the analytical results with the proposed model. The investigation shows that the wider the slot-opening width is, the smaller the peak value of radial and circumferential components of flux density, and the analytical armature-reaction field produced by centralized current in the slots is similar with the armature-reaction field produced by distributed current in the slots in the FE.