• The Korean Journal of Emergency Medical Services
• /
• v.23 no.3
• /
• pp.29-40
• /
• 2019

Purpose: This study was conducted to identify the effects of educational intervention on pre-test and post-test tidal volume, endotracheal peak pressure, and ventilation interval measurements during single-rescuer respiratory-assistant therapy by paramedic students. Methods: The present study, with a quasi-experimental design, included a pre-test and post-test nonequivalent control group. A total of 62 paramedic students (31, experimental group; 31, control group) participated in this study. The intervention lasted 80 minutes. Data were collected from each student before the intervention and two weeks after the intervention, between September 3 and 21, 2018. The collected data were analyzed using IBM SPSS Statistics for Windows, Version 25.0. Results: Tidal volume (p<.001) and endotracheal peak pressure (p=.002) measurements after the intervention were significantly different between the two groups. Analysis of covariance was used to control the variance (the pretest value of endotracheal peak pressure) in order to identify the effect of the intervention in the two groups. Endotracheal peak pressure was not significantly different between the two groups. Conclusion: Education and training of paramedic students in emergency medical services on single-rescuer respiratory-assistant therapy is necessary for the emergency care of patients with respiratory arrest.

• Journal of Ginseng Research
• /
• v.13 no.1
• /
• pp.37-41
• /
• 1989

Reactive metabolites generated by benzo(a)pyrene(BP) monooxygenase(AHH) interact with nucleophiles in DNA and cause mutation and carcinogenesis. We studied the effect of Panax ginseng C.A. Meyer, which induce epoxide hydratase(EH) activity without concomitant induction of AHH activity, on the binding of BP metabolites to DNA in uitro in Sprague Dawley rats. DNA-BP metabolite adducts can be resolved into at least five distinct peaks by elution of a Sephadex LH-20 column with a water methanol gradieNt. These peaks are arbitrarily designated A(most polar) through I(least polar). Of the 5 peaks tentatively assigned to 7,8 biol-9,10-oxide(A),7,8·oxide(B),4,5-oxide(C), and further metabolites of 9-OH-BP(D & E), peaks A, C, D, and I were reduced to 70, 85, 80, and 30% of controls, respectively, and there was no significant change in peak B. In connection with this DNA binding study, BP metabolizing enzymes including AHH, EH, demethylase(DM) activity and cyt. P-450 contents were also investigated in order to compare the BP treated control with ginseng and BP treated test groups. The results showed that the EH activity was increased by 139% over the BP control, the Cyt. P-450 content was increased by 180% over the control value, and DM and AHH activities were also increased to some degree for the BP test group, but there was no significant effect of the ginseng treatment.

• Geomechanics and Engineering
• /
• v.24 no.2
• /
• pp.179-191
• /
• 2021

In this study, the strength and failure mechanism of red sandstones with combined defects were investigated by uniaxial compression tests on red sandstones with different crack angles using two-dimensional particle flow code numerical software, and their mechanical parameters and failure process were studied and analyzed. The results showed that the mechanical characteristics such as peak strength, peak strain, and elastic modulus of the samples with prefabricated combined defects were significantly inferior than those of the intact samples. With increasing crack angle from 15° to 60°, the weakening area of cracks increased, elastic modulus, peak strength, and peak strain gradually reduced, the total number of cracks increased, and more strain energy was released. In addition, the samples underwent initial brittle failure to plastic failure stage, and the failure form was more significant, leading to peeling phenomenon. However, with increasing crack angle from 75° to 90°, the crack-hole combination shared the stress concentration at the tip of the crack-crack combination, resulted in a gradual increase in elastic modulus, peak strain and peak strength, but a decrease in the number of total cracks, the release of strain energy reduced, the plastic failure state weakened, and the spalling phenomenon slowed down. On this basis, the samples with 30° and 45° crack-crack combination were selected for further experimental investigation. Through comparative analysis between the experimental and simulation results, the failure strength and final failure mode with cracks propagation of samples were found to be relatively similar.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4902-4909
• /
• 2012

In this paper, the TOU tariff's based building indoor temperature control algorithm in cooling systems is proposed using control horizon method. A control horizon switching method and linear programming algorithm is used for optimal control, and both TOU and peak tariffs are included to calculate the energy costs. Simulation results show that the reductions of energy cost and peak power can be obtained using proposed algorithms.

• Transactions of the Society of Information Storage Systems
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2014

Plasmonic lithography is the latest technique to overcome diffraction limit of previous optical lithography. In the plasmonic lithography, the nano gap between nano metal wave guide and photoresist should be in sub-wavelength region. SIL-based plasmonic lithography is the one of the solutions to maintain small air gap. However, the nano gap control is so sensitive that a little disturbance is able to have a large effect on the nano gap control. So, we analyzed the characteristics of disturbance, and then modified the previous controller to suppress the disturbance. We applied two peak filters which were fixed one and adaptively changeable one. We experimentally confirmed the improvement of the nano gap control, which reduced nano gap error by 30 %. The proposed control will improve the quality of lithography pattern.

• Journal of Power Electronics
• /
• v.13 no.1
• /
• pp.122-138
• /
• 2013

Adaptive control of a peak current mode controlled (PCM) boost converter supplied by a PEM fuel cell is described in this paper. The adaptive controller with reference model and signal adaptation is developed in order to compensate the deviation of the response during the change of the operating point. The procedure for determining the adaptive algorithm's weighting coefficients, based on a combination of the pole-zero placement method and an optimization method is proposed. After applying the proposed procedure, the optimal adaptive algorithm's weighting coefficients can be determined in just a few iterations, without the use of a computer, thus greatly facilitating the application of the algorithm in real systems. Simulation and experimental results show that the dynamic behavior of a highly nonlinear control system with a fuel cell and a PCM boost converter, can fairly accurately be described by the dynamic behavior of the reference model, i.e., a linear system with constant parameters.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.9
• /
• pp.273-278
• /
• 2014

Recent use of electricity during peak hours electricity supply-demand imbalance is inevitable that limit power use force. Therefore, in this paper, a circuit of parallel power operation equipment for peak power reduction which saves the power to electricity storage device during the non-peak power time and supply from the storage power during the expected power shortages time is designed Through this circuitry, the peak power of the commercial power supply with the parallel operation and connection of the commercial power supply and the power supply of the inverter from electricity storage that is a key feature of PRS(Peak power Reduction System) can be controlled. In addition, in order to increase the efficiency, a Transless Power Circuit DC-AC inverter is developed. Moreover, a variable impedance control is applied to the storage of electric power of an Uninterruptible Power Supply associated with a commercial power source.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.827-832
• /
• 2005

Bacillus subtilis JM3 protease from naturally fermented anchovy sauce was partially purified in 40-60% ammonium sulfate fraction. To accelerate fermentation of anchovy sauce, 2 and 4% crude B. subtilis JM3 proteases were added to 6 month-ripened anchovy sauce, and their hydrolysis degrees and amino-nitrogen contents were investigated at different storage times. Low molecular weight (LMW) peptide was purified by ultrafiltration ana gel permeation chromatography from anchovy sauce manufactured with B, subtilis JM3 protease. Anchovy sauces with 2 and 4% proteases increased hydrolysis rate by 27 and 32%, respectively. Amino-nitrogen contents of anchovy sauces fermented with 2 and 4% proteases were twofold higher than that of control. Control showed five peptide peaks on Bio-Rad P2 gel permeation chromatography spectrum, whereas anchovy sauces with 2 and 4% B. subtilis JM3 proteases showed six and seven peaks, respectively. ACE inhibitory activity was highest in peak 6 (43.75%) of anchovy sauce with 2% protease, followed by peak 5 (34.82%) of control. DPPH radical-scavenging effect was higher than 50% in all samples. Cytotoxicity was highest in peak 3 (44.12%) of control, fellowed by peak 5 (42.04%) of anchovy sauce with 4% protease.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.19-22
• /
• 1993

Demand side management (DSM) is the planning and implementation of those utility designed to influence customer use of electricity in ways that will produce desired changes in the utility's load shape. It is conspicuous that the peak load control of DSM is efficiently adopted. In this paper, the package type air conditioner(A/C) mounted radio controlled switch. During the summer of 1990 KEPCO conducted tests in Seoul areas to determine the economic feasibility of interrupting A/C units for short periods of time during peak load periods. These tests were performed between July 30 and September 20 and were limited to the hours of between 1 and 6 p.m. These tests indicated that each A/C contributes approximately 4.5kW to the system peak and can be switched off 10 minutes out of each 1/2 hour without causing the customer any discomfort. Switching each A/C off for 10 minutes out of each 1/2 hour results in a peak load demand reduction of one kW per unit.

• Annals of Clinical Neurophysiology
• /
• v.25 no.1
• /
• pp.32-37
• /
• 2023

Background: Type 2 diabetic mellitus (T2DM) is an emerging global pandemic which is associated with lots of co-morbidities and reported vascular dysfunctions. T2DM associated vascular dysfunctions leads to vasculopathy in the form of altered peripheral vascular dynamics. Cold stress test (CST) is a reliable sympathetic reactivity test used for assessing vascular dysfunctions. In this study we are trying to quantify vascular dysfunctions in T2DM patients non invasively by various parameters of photoplethysmography (PPG) of cold stress test. Methods: Case control study had done in referral health center AIIMS, Raipur. Parameters are recorded by finger-PPG before, during and after CST (1 min) in 2 groups, control (n = 20 healthy volunteers) and case (n = 20 diagnosed T2DM patients). Results: Due to cold stress, PPG parameter peak amplitude was significantly decreased in both healthy and T2DM groups (p <0.001 and p <0.001, respectively). However, recovery trend of amplitude was significantly slow in T2DM compared to healthy subjects. Another PPG parameter peak to peak interval was significantly higher in healthy group compared to T2DM patients. Conclusions: This study showed that T2DM patients has significant deranged pulse volume parameters like amplitude and peak to peak interval can be used to objectively quantify the vasculopathy in T2DM patients by using sympathetic reactivity to cold stress.