• Herbal Formula Science
• /
• v.21 no.2
• /
• pp.165-172
• /
• 2013

Objectives : This experiment was performed in order to study the effect of Maekmundong-tang on dyspnea patients. Methods : This study involved 14 dyspnea patients from March 1, 2012 to May 31, 2012. Lung capacity of the patients is evaluated with Peak flow meter. Results : Maekmundong-tang administration was revealed effect on dyspnea patients' lung capacity. Conclusions : It was found that Maekmundong-tang administration was effective on dyspnea patients' lung capacity. The mean degree of improvement was 21.79(L/min). It was shown that the more mild dyspnea level was, the more effective and short-term administration more effective.

• Water Engineering Research
• /
• v.5 no.2
• /
• pp.81-99
• /
• 2004

Long term streamflow regime under virtual climate change scenario was examined. Rainfall forecast simulation of the Canadian Global Coupled Model (CGCM2) of the Canadian Climate Center for modeling and analysis for the IPCC SRES B2 scenario was used for analysis. The B2 scenario envisions slower population growth (10.4 billion by 2010) with a more rapidly evolving economy and more emphasis on environmental protection. The relatively large scale of GCM hinders the accurate computation of the important streamflow characteristics such as the peak flow rate and lag time, etc. The GCM rainfall with more than 100km scale was downscaled to 2km-scale using the space-time stochastic random cascade model. The HEC-HMS was used for distributed hydrologic model which can take the grid rainfall as input data. The result illustrates that the annual variation of the total runoff and the peak flow can be much greater than rainfall variation, which means actual impact of rainfall variation for the available water resources can be much greater than the extent of the rainfall variation.

• Speech Sciences
• /
• v.6
• /
• pp.145-161
• /
• 1999

21 normal Korean native speakers participated as subjects to investigate the acoustic and aerodynamic study of Korean fricatives and affricates and to make good use of the results for the patients with articulation problems. Their productions of [sa], [s'a], [ca], [$c^{h}a$], [c'a], [asa], [as'a], [aca], [$ac^{h}a$], and [ac'a] were analyzed with CSL and AP II instruments. The results are as followings: (1) Fricatives showed higher frequency in minimum and maximum frequency and longer duration than affricates. (2) Fricatives showed higher peak flow rate and longer rise time than affricates. (3) When we compared the different phonemes with each other, their differences were usually statistically significant, but when we compared CV and VCV syllables, they did not show significant difference, even VCV's showed higher and longer values than CV syllables. (4) Normaly, lax fricatives and affricates showed lower frequency and higher peak flow rate, shorter frication duration, and longer rise time.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.4 s.97
• /
• pp.452-456
• /
• 2005

Cyclone is widely adopted in the vacuum cleaner, because of the simple structure, the high dust collection efficiency and its transparency feature, which can be shown to the customer. At past times, cyclone performance was represented by collection efficiency, flow rate, pressure drop etc. At recent times the noise problem is getting important as cyclone comes into home-appliances. In this paper, pressure drop of cyclone and it's noise were measured at the variation of the cyclone structure and the main sources of cyclone peak noise was found by experimental and numerical analysis. In addition, the structure for peak noise reduction was suggested and it is beneficial both pressure drop and noise reduction.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.266-268
• /
• 2015

In this paper, we write about EDISON program. We study about where to use this program. We can use this program for FEA naturally. But we study that using this program in class. Many students can't understand many mechanics of materials' problem. They want to see image such as change of beam. It can help students to understand many problem. We can use ANSYS or Abaqus. But EDISON program is better for students because of it is freeware. In this paper, I write two problem. One is peak stress of basic beam, another is shearing stress flow of I-beam. On the basis of this, EDISON program will be widely used.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.03a
• /
• pp.61-66
• /
• 1998

Since a gas turbine is made use of generating electricity for peak time, it is a very important to operate a peak time load with safety. The main components of a gas turbine are the compressor, the combustion chamber and the turbine. So, there also must be modeled a component of gas turbines for the control with safety but it is not easy. In this paper we acquire a transfer function based on the operations data of Gun-san gas turbine and study to apply Neural-Network 2-DOF PID controler to control loop of gas turbine to reduce phenomena caused by integral and derivative actions through simulation. We obtained satisfactory results to disturbances of subcontrol loop such as, fuel flow, air flow, turbine extraction temperature.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.89-92
• /
• 2004

Cyclone is widely apoted in the vacuum cleaner, because of it's simple structure, the dust collection efficiency is high and its transparency feaure which can be shown to the customer. At past times, cyclone performance is represented by collection efficiency, flow rate, pressure drop etc. At recent times the noise problem is getting important as cyclone comes into home-appliances. In this paper, cyclone's pressure drop and noise is measured at the variation of the cyclone structure and the main sources of cyclone peak noise is found by experiments and numerical analysis. In addition, the structure for peak noise reduction is suggested and it is beneficial both pressure drop and noise reduction.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.4
• /
• pp.81-88
• /
• 1990

The flow in a river reach where is influenced by tidal motion is characterized by unsteady flow. The flood analysis in the river reach needs depending upon the theory based on the complete unsteady flow equations. In this study the unsteady flow model which is called CRIUM (Channel Routing by Implicit Unsteady Flow Model) was developed and was applied to the Mankyong and Dongjin river in order to analyze the flood characteristics. The results, which were calibrated and verified by the flood records to be measured in the two rivers, show that unsteady flow mode] can be used for the derivation of the flood hydrograph. The peak flood discharges were estimated as 4,960 and $2,870m^3$/sec in 100 year frequency at the estuary of the Mankyong and Dongjin river, respectively. In addition, it was analyzed that the river reaches were not influenced by tidal motion when the discharge magnitude was larger than approximately $3,000m^3$/sec.

• Journal of the Korean Society of Safety
• /
• v.26 no.2
• /
• pp.83-88
• /
• 2011

Annually, many parts of the Korea have been damaged from the localized heavy rain and/or typhoons which peak between June and September, which result in extensive financial and human loss. Especially, because the most area of Gangwon province is composed of the steep slope mountains, the damages by the debris flow or land-sliding are more frequent and the frequency has been increased. To analyze the characteristics and causes of these debris flow disasters, lots of study are recently being conducted through database of weather, hydrologic, soil etc using a GIS or remote sensing. In this study, we applied GIS method to analyze the risk of the debris flow area. With the statistical analysis and infinite slope stability model(SINMAP), the debris flow risk level of the mountain slope was generated. As a result, the GIS statistical analysis showed high correlation that former model of SINMAP in determining the debris flow risk area.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.409-414
• /
• 2013

본 연구는 2차원 Compression Corner에서의 초음속 유동의 특성에 관한 수치적 해석을 목적으로 한다. 고속 유동에 관한 연구에 따르면 Compression corner에서 Peak pressure와 Recirculation region이 Flow velocity와 Corner angle에 의하여 크게 영향을 받는 다는 것을 알게 되었다. 지정된 Mach number에서 Corner angle을 $8^{\circ}{\sim}24^{\circ}$로 변화시켜 가면서 Supersonic flow에서 유동해석을 하였다. EDISON을 사용한 Compression Corner 유동해석 결과를 건국대학교 In-house code 'k-flow'를 이용한 결과, 실험 결과와 비교분석하였다.