• Progress in Medical Physics
• /
• v.25 no.2
• /
• pp.116-121
• /
• 2014

Next future, The bio technology will be a rapidly developing. This paper is the scattering beam measurement of the red blood cell (RBC) and the fabrication of the micro cell biochip using the bio micro electro mechanical system (Bio-MEMS) process technology. The Major process method of Bio-MEMS technology was used the buffered oxide etchant (BOE), electro chemical discharge (ECD) and ultraviolet sensitive adhesives (UVSA). All experiments were the 10 times according to the process conditions. The experiment and research are required the ultraviolet expose, the micro fluid current, the cell control and the measurement of the output voltage Vpp (peak to peak) waveform by scattering angles. The transmitting and receiving of the laser beam was used the single mode optical fiber. The principles of the optical properties are as follows. The red blood cells were injected into the micro channel. The single mode optical fiber was inserting in the guide channel. The He-Ne laser beam was focusing in the single mode optical fiber. The transmission He-Ne laser beam is irradiating to the red blood cells. The manufactured guide channel consists of the four inputs and the four outputs. The red blood cell was allowed with the cylinder pump. The output voltage Vpp waveform of the scattering beam was measured with a photo detector. The receiving angle of the output optical fiber is $0^{\circ}$, $5^{\circ}$, $10^{\circ}$, $15^{\circ}$. The magnitude of the output voltage Vpp waveform was measured in the decrease according to increase of the reception angles. The difference of the output voltage Vpp waveform is due differences of the light transmittance of the red blood cells.

• Journal of Korea Water Resources Association
• /
• v.45 no.10
• /
• pp.1035-1041
• /
• 2012

This paper is on the decision of design magnitude for flood control of urban basin, based on flooding characteristic values. In Korea, a design magnitude for flood control is established based on peak discharge of the outlet of basin. However, this method is inappropriate in an urban basin because sewerage only can flow out as much as it could and other discharge overflow to basin. In order to calculate a design magnitude for flood control of an urban basin, flooding characteristic values (peak discharge of pipe, average flooded depth, maximum flooded depths of an important point, flooded area, flooded volume, flooded time) were used as a tool. Using the Gwanghwamun Square as an example, a methodology was proposed that used XP-SWMM 2010 model as a platform to predict urban flood disaster. It can help other local government and residents to better understand, prepare for and manage a flood in urban environments.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.108-116
• /
• 2002

This paper presents the measurements and evaluation of voltage waveforms due to human electrostatic discharge(ESD). The principle of operation and design rule of a new device for measuring the ESD fast transient voltages with very fast rise time were described. Peak values and rise time of ESD voltages derived from a charged human body under a variety of experimental conditions were examined. The frequency bandwidth of the proposed voltage measuring system ranges from DC to 400[㎒]. The ESD voltage waveform is nearly equal to the ESD current waveform and the peak amplitude of ESD current waveform is roughly proportional to the ESD voltage in each experimental conditions. A rapid approach results in a discharge voltage with a faster initial rise time than for a slow approach. The voltages caused by direct finger ESDs have an initial slope with a relatively long, 10∼30[ns] rise time, but the amplitude is small. On the other hand, the voltages caused by direct hand/metal ESDs have a steep initial s1ope with 1 ∼3[ns] rise time, but an initial spike is very big. As a consequence, it was found that the ESD voltage and current waveforms strongly depend on the approach speed and material of intruder. These measurement results would be useful to design the ESD protective devices.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.8
• /
• pp.5-12
• /
• 2021

Climate change caused by global warming increases the frequency of occurrence of super typhoons and causes various types of sediment disasters such as debris flows in the mountainous area. This study is to evaluate the behavior of debris flow according to the multiplier value of the precipitation characteristics and the quantity of debris flow according to the typhoon category. For the analysis of the debris flow, the finite difference method for time elapse was applied. The larger the typhoon category, the higher the peak value of the flow discharge of debris flow and the faster the arrival time. When the precipitation characteristic multiplier is large, the fluctuation amplitude is high and the bandwidth is wide. When the slope angle was steeper, water discharge increased by 2~2.5 times or more, and the fluctuation of the flow discharge of debris flow increased. All of the velocities of debris flow were included to the class of "Very rapid", and the distribution of the erosion or sedimentation velocity of debris flows showed that the magnitude of erosion increased from the beginning, large-scale erosion occurred, and flowed downstream. The results of this study will provide information for predicting debris flow disasters, structural countermeasures and establishing countermeasures for reinforcing resilience in vulnerable areas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6B
• /
• pp.503-512
• /
• 2009

Watershed models, which are a tool for water cycle mechanism, are classified as the distributed model and the lumped model. Currently, the distributed models have been more widely used than lumped model for many researches and applications. The lumped model estimates the parameters in the conceptual and empirical sense, on the other hand, in the case of distributed model the first-guess value is estimated from the grid-based watershed characteristics and rainfall data. Therefore, the distributed model needs more detailed parameter adjustment in its calibration and also one should precisely understand the model parameters' characteristics and sensitivity. This study uses Jungnang basin as a study area and $Vflo^{TM}$ model, which is a physics-based distributed hydrologic model, is used to analyze its parameters' sensitivity. To begin with, 100 years frequency-design rainfall is derived from Huff's method for rainfall duration of 6 hours, then the discharge is simulated using the calibrated parameters of $Vflo^{TM}$ model. As a result, hydraulic conductivity and overland's roughness have an effect on runoff depth and peak discharge, respectively, while channel's roughness have influence on travel time and peak discharge.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.5
• /
• pp.81-89
• /
• 1995

One of the most difficult problem to estimate the flood inflow is how to understand the effective rainfall. The effective rainfall is absolutely influenced by the condition of soil moisture in the watershed just before the storm event. DAWAST model developed to simulate the daily streamflow considering the meteologic and geographic characteristics in the Korean watersheds was applied to understand the soil moisture and estimate the effective rainfall rather accurately through the daily water balance in the watershed. From this soil moisture and effective rainfall, concentration time, dimensionless hydrograph, and addition of baseflow, the rainfall-runoff model for flood flow was developed by converting the concept of long-term runoff into short-term runoff. And, real-time flood forecasting model was also developed to forecast the flood-inflow hydrograph to the river and reservoir, and called RETFLO model. According to the model verification, RETFLO model can be practically applied to the medium and small river and reservoir to forecast the flood hydrograph with peak discharge, peak time, and volume. Consequently, flood forecasting and warning system in the river and the reservoir can be greatly improved by using personal computer.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.99-105
• /
• 2010

The concentration and size analysis of in-situ suspended particulate material were measured using an optical instrument, LISST-100, in the bottom layer at the three inlets of the Seomjin River Estuary, mouth of Gwangyang bay, and Gwangyang bay-side of the Namhae Bridge. In the Seomjin river estuary and mouth of Gwangyang bay-side of the Namhae Bridge, the in-situ mean grain size of the suspended material changed from a uni-modal distribution with a dominant peak at a coarse fraction to a bi-modal distribution with a secondary peak at the finer particles. Seomjin River. The interactions between suspended particulate concentration and beam attenuation coefficient of suspended particulate matters depended on the supply of finer and coarser particles in the mouth of Gwangyang Bay and Seomjin River. So, interactions reflected difference of the concentration, mean size and sorting of suspended particulate matters. The difference of interaction showed dynamic behaviors to the resuspension and deflocculation processes increased river discharge. This showed that it may be possible to use the interactions between the suspended particle concentration and beam attenuation coefficient to monitor the temporal and spatial distributions of in-situ particles.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2780-2782
• /
• 1999

Many electronic ballasts for low pressure discharge lamps as fluorescent lamps are produced and commercialized. However, the electronic ballasts for high pressure lamps are now in progress to because of poor reliability and high cost of production. To obtain the confidence of electronic ballasts, it is necessary to prolong the life time of output switches. A variable frequency driver for inverter switches that can control the magnitude of output current with temperature of switches was designed and simulated. A conditions for circuit design are 22kHz : standard frequency, $100^{\circ}C$: standard temperature, $I_{peak}$ : 0.76A, and $V_{peak}$ : 184V, respectively. By simulation, as the temperature exceed a standard temperature, the frequency was increased up to 40kHz. However, the current and voltage that flow through switchs were decreased to 0.507A and 121V at $150^{\circ}C$, respectively.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1350-1351
• /
• 2008

대기압 플라즈마를 발생시키는 것은 종래의 저기압 플라즈마를 발생시키는 것 보다 대단히 어렵다. 하지만, 대기압 플라즈마는 진공장치가 필요 없고, 제작방식이 비교적 간편하며 살균, 의료, 표면처리 등 다양한 응용이 가능해서 그 잠재력이 매우 크다. 본 연구에서는 유전체가 없는 두 전극사이에서 대기압 저온 마이크로 플라즈마를 발생시켰으며, submicrosecond pulse 파형으로 glow discharge를 유지할 수 있었다. 플라즈마 소스의 전극 간격은 200[${\mu}m$]이고 방전개시전압은 약 450${\sim}$600[V]이다. 플라즈마를 발생시키기 위한 feeding gas는 He 100%이다. 본 연구에서 개발된 대기압 플라즈마는 소비전력이 2[W]미만으로 온도는 조건에 따라 40$^{\circ}C$미만으로 발생 가능하다. 또한 스펙트럼 분석 시 777nm인 산소원자의 peak이 다른 원자 혹은 분자들의 peak보다 월등히 높다.

• Journal of Korea Water Resources Association
• /
• v.30 no.1
• /
• pp.75-82
• /
• 1997

The stream morphologic characteristics of Wonju stream with small watershed are developed with a regular correlation referred to the Horton-Strahler's lows of stream order. Using Manning's formula and the discharges simulated by NWS-PC rainfallrunoff model that has been applied to the adjacent basin for model calibration and verification, the hydraulic characteristics at Wonju bridge are investigated. The peak discharge and the time to peak of unit hydrograph are analyzed by the calculated geomorphologic parameters. Rather primitive as this study is, these results are provided to be used for geomorphologic instantaneous unit hydropraph of ungaged basins including this study area. Through the reestablishment of rating curve and hydrograph with continuous field observations, the hydrologic and hydraulic characteristics of Wonju stream must be presented.