• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.5
• /
• pp.908-916
• /
• 2000

This study was undertaken to purify the anticoagulant polysaccharide from Pachymeniopsis elliptica. The anticoagulant compound (PE-2IVc-2-1) was isolated from the crude polysaccharide (PE-2) by the sequential steps such as ultrafiltration (PE-2IV), anion-exchange chromatography of DEAE-Toyopearl 650C(PE-2IVc), size-exclusion chromatography of Sepharose CL-6B (PE-2IVc), and HPLC Shodex OHpak column chromatography (PE-2IVc-2-1). The apparent molecular weight of purified polysaccharide (PE-2IVc-2-1) was approximately 710 kDa. It was mainly composed of galactose (48.6%) and 3,6-anhydrogalactose (44.0%) with 27.1% of sulfate residue, in addition a trace amount of xylose (3.6%), glucose (1.1%), mannose (1.1%), arabinose (0.8%) and fucose (0.8%). The IR spectrum of the polysaccharide showed the characteristic bands of S=O(1116.74 and 1143.17 $cm^{-1}$) and C-O-S (828.19 $cm^{-1}$) stretching, respectively. The anticoagulant effect of PE-2 in ex vivo was proportional to the concentration of intravenously injected dose, up to 100 mg/kg.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.2043-2052
• /
• 1994

This paper proposes a new parallel ASIC architecture for real-time image processing to reduce inter-processing element (inter-PE) communication overhead, called a Sliding Memory Plane (SliM) Image Processor. The Slim Image Processor consists of $3\times3$ processing elements (PEs) connected by a mesh topology. With easy scalability due to the topology. a set of SliM Image Processors can form a mesh-connected SIMD parallel architecture. called the SliM Array Processor. The idea of sliding means that all pixels are slided into all neighboring PEs without interrupting PEs and without a coprocessor or a DMA controller. Since the inter-PE communication and computation occur simultaneously. the inter-PE communication overhead, significant disadvantage of existing machines greatly diminishes. Two I/O planes provide a buffering capability and reduce the date I/O overhead. In addition, using the by-passing path provides eight-way connectivity even with four links. with these salient features. SliM shows a significant performance improvement. This paper presents architectures of a PE and the SliM Image Processor, and describes the design of an instruction set.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.182-188
• /
• 2008

The compounds of recycled polyethylene(PE) and fly-ashes were prepared. Polymers used were sorted PE from mixed plastics of household waste and Low Density Polyethylene(LDPE) and Linear Low Density Polyethylene(LLDPE) recycled from the scrap of packaging film plants. Fly-ashes were from the power plant and from the household waste incinerator. The tensile strength of recycled LDPE and LLDPE compounds decreased and the flexural modulus increased with greater amount of the power plant fly-ash. Anthracite fly-ash gave rise to slightly higher tensile and flexural strength of the LLDPE mixtures than bituminous coal fly-ash presumably due to higher content of unburned carbon. The incinerator fly-ash introduced to household waste PE enhanced both tensile strength and flexural modulus of the compounds. When LDPE and household waste PE were used together, the synergistic effect of incinerator fly-ash to household waste PE was offset by reduced crystallization of LDPE due to the filler particle. The compounds of household waste PE and incinerator fly-ash might be applied to structural materials for such as sewage pipe, which reduces the waste treatment cost and conserve the environment and resources.

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.252-257
• /
• 2001

This studies were carried out to investigate the physical properties and quality of sweet persimmon fruits which packaged with polyethylene for improvement of quality and storage. The fruits which packed 5 fruits a pack by 0.06mm PE film was maintained freshness during 120 days of storage, but those which packaged a fruit was maintained freshens during 150 days of storage, and quality of fruits was excellent during storage. It was more excellent quality of fruits packaged 5 fruits a pack with 0.08 and 0.10mm PE film than quality of those packaged by 0.06mm PE film. Hardness of fruits were decreased during storage, and the color of fruits was changed. But the fruits which packaged each with 0.08mm PE film was maitained freshens during 180 days of storage, and the quality of fruits was excellent during storage. The hardness and color of fruits were net changed during storage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.2
• /
• pp.228-233
• /
• 2001

This study was carried out to characterize the enzymatic properties and effectiveness on the firmness of pectinesterase(PE) and polygalacturonase(PG) which are present in carrot cell wall, and to determine the blanching condition of raw carrot. Crude enzyme was extracted from carrots and used as PE and PG. The optimum pH of PE and PG activity were 7.0 and 5.0, respectively. NaCl enhanced PE and PG activities, particularly at 0.15 M and 0.10 M, respectively. Although the optimum temperature of PG ($70^{\circ}C$) was higher than that of PE ($50^{\circ}C$), PE ($Z-value=8.76^{\circ}C$) was more heat-stable than PG($Z-value=6.67^{\circ}C$). Blanching condition was determined as at $55^{\circ}C$ for 60 min in 0.03 M $CaCl_2$, 0.1 M NaCl and pH 7.0 from measuring firmness after blanching at various temperature ($50~70^{\circ}C$) and time (5~60 min).

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.331-338
• /
• 2008

Coal-tar enamel, blown asphalt and polyethylene have been used as wrapping materials of steel pipe in Korea. Currently, every manufacturer produces wrapped steel pipes with different materials and methods, and little research has been performed to get on wrapping methods and materials. In this research, properties of wrapping material of steel pipe used for water supply have been evaluated. All of the materials tested in this work were found to meet the standard. Among the wrapping materials of steel pipe tested, blown asphalt and coal-tar enamel were reasonable in price, and their mechanical properties were excellent. The quality of the wrapped steel pipes was being melted easily in organic solvent. When coated thick, the load of the steel pipes was higher than necessary. Tensile strength of cathode exfoliation and PE 3-layer wrapping method was excellent. The pulling intensity of T-Die PE 3-layer was stronger than PE fluidized in PE wrapping method. Cathode exfoliation area was smaller than PE fluidized. Mechanical property and thermo-property of T-Die PE 3-layer were excellent and its anti-chemical property was great. Liquid epoxy can change the property of coating materials depending on the hardening condition and resin selection. Polyurethane used in this test showed a less adhesive strength with steel pipes than epoxy. Moisture absorbance rate was higher than Epoxy's, however. To utilize polyurethane as wrapping materials, basic property of the matter should be improved followed by finding the best suited coating condition. The method of PE 3-layer by extrude method appeared to be the best in this study. However, identification of other wrapping materials requires further additional tests.

• The korean journal of orthodontics
• /
• v.36 no.6
• /
• pp.451-464
• /
• 2006

The purpose of this study was to search for an appropriate method of coating $TiO_2$ on orthodontic appliances. $TiO_2$ thin films were deposited on orthodontic wires and brackets using sol-gel, CVD (Chemical Vapor Deposition) and PE-CVD (Plasma Enhanced-CVD) methods. The roughness of $TiO_2$-coated surfaces was investigated via scanning electron microscope (SEM) and adhesive strength of $TiO_2$ thin films was measured by adhesive tape pull test. Methylene blue degradation test was carried out to evaluate the photocatalytic activity of $TiO_2$ and the corrosion resistance of $TiO_2$ thin films against fluoride solution was also analyzed by observing the surfaces of $TiO_2$-coated wires and brackets via SEM after immersion in sodium fluoride solution. Through the comparison of properties and photocatalytic activity of $TiO_2$ thin films according to the coating methods, the following results were obtained. Smoother surfaces of $TiO_2$ thin films were generated by CVD or PE-CVD methods than through the sol-gel method or the control. Adhesive strength of the $TiO_2$ thin films was highest in PE-CVD and gradually became lower in the order of CVD, then the sol-gel method. Photocatalytic activity of $TiO_2$ thin films on methylene blue was the highest in PE-CVD and gradually became lower in the order of CVD, then the sol-gel method. Corrosion resistance of $TiO_2$ thin films against fluoride solution was stronger in CVD and PE-CVD methods than in the sol-gel method. The results of this study suggest that the CVD or PE-CVD methods is more appropriate than the sol-gel method for $TiO_2$ coating on orthodontic wires and brackets.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.625-633
• /
• 2021

This paper describes a scalable architecture for flexible hardware implementation of Montgomery modular multiplication. Our scalable modular multiplier architecture, which is based on a one-dimensional array of processing elements (PEs), performs word parallel operation and allows us to adjust computational performance and hardware complexity depending on the number of PEs used, N_PE. Based on the proposed architecture, we designed a scalable Montgomery modular multiplier (sMM) core supporting eight field sizes defined in SEC2. Synthesized with 180-nm CMOS cell library, our sMM core was implemented with 38,317 gate equivalents (GEs) and 139,390 GEs for N_PE=1 and N_PE=8, respectively. When operating with a 100 MHz clock, it was evaluated that 256-bit modular multiplications of 0.57 million times/sec for N_PE=1 and 3.5 million times/sec for N_PE=8 can be computed. Our sMM core has the advantage of enabling an optimized implementation by determining the number of PEs to be used in consideration of computational performance and hardware resources required in application fields, and it can be used as an IP (intellectual property) in scalable hardware design of elliptic curve cryptography (ECC).

• Electrical & Electronic Materials
• /
• v.2 no.1
• /
• pp.52-64
• /
• 1989

본 연구에서는 고분자-고분자 및 고분자-금속-고분자의 구조를 갖는 2층고분가물질에 관한 전도전류특성이 조사되었다. 그 결과 2층고분자시료의 전도전류는 인가전압의 극성에 따라 차이가 있었으며 폴리에틸렌과 산화폴리에틸렌으로 구성되는 2층시료 PE-OxPE의 경우 OxPE의 산화도가 증대될 수록 전도전류값이 증가하는 것으로 나타났다. 또한 2충시료 PE-EVA에 대한 전도전류의 극성효과는 (+)극으로부터의 전하주입성이 뛰어난 EVA의 특성에 기인한다. 2층 고분자시료의 중간에 금속(Al)이 삽입된 PE-Al-EVA계의 전도전류특성은 Maxell-Wagner모델에 의한 이론에 대체로 부합되지만 이때의 전도전류는 PE-EVA의 구조보다 낮게 관측되었다.

• Korean journal of food and cookery science
• /
• v.18 no.5
• /
• pp.522-528
• /
• 2002

The effects of packaging materials, Ny/PE, PET/PE/Al, PET/PE/LDPE/CPP, and PET/Al/Ny/CPP, and packaging methods, atmospheric and vacuum packaging on physicochemical properties of onion Kimchi and rosemary-onion Kimchi were investigated. The maximun swelling days of packaging materials were increased more in rosemary-onion Kimchi than in onion kimchi, and they were in the order of PET/Al/Ny/CPP, PET/PE/Al, PET/PE/LDPE/CPP, and Ny/PE. The pH and reducing sugar contents of onion Kimchi and rosemary-onion Kimchi were decreased during storage. and those of lion Kimchi and rosemary-onion Kimchi packaged in PET/Al/Ny/CPP were higher than those in different packaging materials. Titratible acidity and vitamin C content of rosemary-onion Kimchi were lower than those of onion Kimchi, but there were no differences in the L and b values between two groups.