• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1812-1816
• /
• 2004

The stereoselective synthesis 4′,6′-dually branched carbocyclic nucleosides was accomplished in this study. The introduction of a methyl group in the 6′$({\alpha})$-position was accomplished by Felkin-Anh controlled alkylation. The construction of the required 4′$({\alpha})$-quaternary carbon was carried out using a [3,3]-sigmatropic rearrangement. Bis-vinyl 6 was successfully cyclized using a Grubbs' catalyst II. The natural bases (adenine, cytosine) were efficiently coupled using a Pd(0) catalyst. When the synthesized compounds were examined for their activity against several viruses such as the HIV-1, HSV-1, HSV-2 and HCMV, the cytosine analogue 13 exhibited good antiviral activity against the HCMV.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1520-1524
• /
• 2005

This paper describes the racemic and stereoselective synthetic route for a novel 4'$\alpha$-phenyl and 6'$\alpha$-methyl doubly branched carbocyclic nucleosides from an acyclic 2-hydroxy acetophenone. The installation of phenyl group at the 4'-position of carbocyclic nucleoside was successfully accomplished via a sequential [3,3]-sigmatropic rearrangement. The stereoselective introduction of a methyl group in the 6'$\alpha$-position was accomplished by Felkin-Anh controlled alkylation. Bis-vinyl 11 compound was successfully cyclized using a Grubbs’ catalyst II to desired carbocycles. The natural bases (adenine and cytosine) were efficiently coupled using a Pd(0) catalyst. Although all the synthesized compounds were examined for their activity against several viruses such as HIV-1, HSV-1, HSV-2 and HCMV, only cytosine analogues 17 exhibited weak antiviral activity against HCMV.

• YAKHAK HOEJI
• /
• v.49 no.1
• /
• pp.20-24
• /
• 2005

The synthesis of 4',5'-doubly branched carbocyclic nucleosides was accomplished in this study. The selective methylation in the 5'-position was made by Felkin-Anh controlled Grignard addition. The construction of the required 4'-quaternary carbon was carried out by using a [3,3]-sigmatropic rearrangement. Bis-vinyl 6 was successfully cyclized using a Grubbs' catalyst II. The natural pyrimidine bases (cytosine, uracil, thymine) were efficiently coupled using a Pd(0) catalyst. When the synthesized compounds were examined for their activity against several viruses such as the HIV-1, HSV-1, HSV-2 and HCMV, the cytosine analogue 13 exhibited weak antiviral activity against the HCMV.

• Macromolecular Research
• /
• v.17 no.8
• /
• pp.563-567
• /
• 2009

In order to improve the thermomechanical performance of polyketone, a third monomer (4-methylstyrene) was added to the copolymerization system. The terpolymer of CO, styrene, and 4-methylstyrene was synthesized in the presence of multi component catalysts containing palladium acetate and rare earth metal phosphonates. The products were characterized by infrared spectroscopy (IR), and nuclear magnetic resonance spectroscopy (NMR). The effects of the different components, including the third monomer, palladium acetate, 2,2'-bipyridyl, rare earth phosphonate, p-toluene-sulphonic acid, and p-benzoquinone, were also studied. The highest catalytic activity of 965.51 g/(gPd h) was obtained with a catalyst containing palladium acetate and rare earth phosphonate.

• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.77-82
• /
• 2010

Highly conductive yarn was successfully obtained using electroless nickel plating method with palladium activation. In the presence of palladium seed on surface of fibers as a catalyst, continuos nickel layer produced on surface of fibers by reducing $Ni${2+}$ ion in the electroless plating bath to $Ni^0$. It was found that the Pd-activation using $SnCl_2$ and $PdCl_2$ to deposit palladium seeds on the surface of fibers plays a key role in the subsequent electroless plating of nickel. It also found that electroless nickel plating on the fibers can induce the nickel-plated $ELEX^{(R)}$ fibers to improve the electrical conductivity of the fibers. The thickness of nickel coating layer on the Pd-activated $ELEX^{(R)}$ fibers and specific conductivity of the fiber were increased through electroless plating time. The temperature of nickel plating bath was very effective to enhance the nickel deposition rate.

• Journal of Hydrogen and New Energy
• /
• v.18 no.4
• /
• pp.406-412
• /
• 2007

An experimental study on the design of a catalytic combustor for 1.6 kW MCFC system has been performed. The roles of the catalytic combustor are to completely burn anode off-gas and to supply sufficient $CO_2$ to cathode channels. In order to avoid hot spot or fuel slippage, flow uniformity at the catalyst inlet was achieved by installing two crossing perforated plates between the catalyst and the mixing chamber with minimal pressure drop. A Pd/Ce/Ni-$Al_2O_3$ catalyst was used for complete combustion of the off-gas at GHSV=36,000.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.80-84
• /
• 1991

Lignocellulosic biomass including acetosolv ricestraw and spruce lignin were liquefied and converted into liquid hydrocarbons by catalytic hydroliquefaction reaction. These experimental works were carried out in 1-liter-capacity autoclave using 50% tetralin and m-cresol solution respectively as soluble solvent and Ni. Pd. Fe and red mud as catalyst. $H_2$ gas was supplied into the reactor for escaltion of deoxhydroenolysis reaction. Catalyst concentrations were 1 % of raw material based on weight. The ratio between raw materials and soluble solvent are 1g and 10cc. The reaction conditions are 400-$700^{\circ}C$ of reaction temperature, 10-50 atms of reaction pressure. The highest yield of hydrocarbon, so called "product oil" showed 32% and 5.5% of lowest char formation when red mud was used as catalyst. The product oil yields from those of other catalysts were in the range of 20-29%. The influence of different initial hydrogen pressures was examined in the range d 30-50 atms. A minimum pressure of 35 atms was necessary to obtain a complete recovery of souble solvent for recycling.

• Korean Journal of Materials Research
• /
• v.28 no.6
• /
• pp.365-369
• /
• 2018

We perform density functional theory calculations to study the CO and $O_2$ adsorption chemistry of Pt@X core@shell bimetallic nanoparticles (X = Pd, Rh, Ru, Au, or Ag). To prevent CO-poisoning of Pt nanoparticles, we introduce a Pt@X core-shell nanoparticle model that is composed of exposed surface sites of Pt and facets of X alloying element. We find that Pt@Pd, Pt@Rh, Pt@Ru, and Pt@Ag nanoparticles spatially bind CO and $O_2$, separately, on Pt and X, respectively. Particularly, Pt@Ag nanoparticles show the most well-balanced CO and $O_2$ binding energy values, which are required for facile CO oxidation. On the other hand, the $O_2$ binding energies of Pt@Pd, Pt@Ru, and Pt@Rh nanoparticles are too strong to catalyze further CO oxidation because of the strong oxygen affinity of Pd, Ru, and Rh. The Au shell of Pt@Au nanoparticles preferentially bond CO rather than $O_2$. From a catalysis design perspective, we believe that Pt@Ag is a better-performing Pt-based CO-tolerant CO oxidation catalyst.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.482-488
• /
• 2001

Platinum group metals (pgm) are useful to many industries such as chemical, dental and medical, petroleum, refining, electrical and electronic, and automotive. Researchers at the South Dakota School of Mines and Technology and PGM Recovery Ltd. have developed jointly an environmentally sound and metallurgically efficient process for extracting these metals from secondary sources. Once these metals have been dissolved in the leach liquor, the individual metals mainly platinum, palladium, and rhodium, should be separated in order to recover the individual metals with high purity. During this investigation, solvent extraction has been chosen as the method used to achieve the separation and extraction of platinum, palladium, and rhodium from the leach liquor. There were three solutions used throughout this procedure: 1) Synthetic solution (200 ppm Pt 80 ppm Pd 20 ppm Rh; 300 ppm Pt, 180 ppm Pd 50 ppm Rh), and 2) Auto catalyst leach liquors (100 ppm Pt, 30 ppm Pd, 20 ppm Rh). The solvents investigated included Lix 84(2-hydroxy-5-nonylacetonphenone oxime in a mixture with 5-dodecylsalicyloxime), Lix 84-I, ACORGA CLX-50 (diester of pyridine 3,5 dicarboxylic acid), and di-hexyl sulfide. The extraction values achieved using ACORGA CLX-50, Lix 84, and Lix 84-I were respectively Pt (25%, 0% 0%), Pd (100%, 99.8%, 95.3%), and Rh (99.1%, 35.5%, 4.25%). The stripping processes for the Lix 84, and Lix 84-I were proven to be more involved than others. The solutions were required to be simultaneously heated and stirred. The percentages acquired through these processes yielded unsatisfactory results. The stripping procedure for the ACORGA CLX-50 was easier to execute, yet the percentage recovered from this process was also unsatisfactory. Overall the di-hexyl sulfide has proved to be the most successful organic for this procedure. The average percent extracted for palladium was excellent with 99.9% - 100% with very little Platinum and rhodium extracted. The ability of stripping palladium in ammonia solution was also found to be excellent.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.910-914
• /
• 2018

Since catalyst technology is one of the promising technologies to improve the working performance of next generation energy and electronic devices, many efforts have been made to develop various catalysts with high efficiency at a low cost. However, there are remaining challenges to be resolved in order to use the suggested catalytic materials, such as platinum (Pt), gold (Au), and palladium (Pd), due to their poor cost-effectiveness for device applications. In this study, to overcome these challenges, we suggest a useful method to increase the surface area of a noble metal catalyst material, resulting in a reduction of the total amount of catalyst usage. By employing block copolymer (BCP) self-assembly and nano-transfer printing (n-TP) processes, we successfully fabricated sub-20 nm Pt line and cross-bar patterns. Furthermore, we obtained a highly ordered Pt cross-bar pattern on a Ni thin film and a Pt-embedded Ni thin film, which can be used as hetero hybrid alloy catalyst structure. For a detailed analysis of the hybrid catalytic material, we used scanning electron microscope (SEM), transmission electron microscope (TEM) and energy-dispersive X-ray spectroscopy (EDS), which revealed a well-defined nanoporous Pt nanostructure on the Ni thin film. Based on these results, we expect that the successful hybridization of various catalytic nanostructures can be extended to other material systems and devices in the near future.