• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.4
• /
• pp.362-368
• /
• 2023

Multilayered actuators using Pb(Mg_1/3Nb_2/3)O₃-Pb(In_1/2Nb_1/2)O₃-PbTiO₃ (PMN-PIN-PT) crystals have demonstrated excellent properties, but are costly and lack mechanical strength. Textured PMN-PIN-PT ceramics exhibit robust mechanical strength and comparable properties to their single crystals form. However, the development of multilayered actuators using textured PMN-PIN-PT ceramics has not been achieved until now. This study presents the development of a multilayered actuator using textured 0.37PMN-0.29PIN-0.34PT ceramics with an Ag_0.9/Pd_0.1 inner electrode, co-fired at 950℃. A random 0.37PMN-0.29PIN-0.34PT ceramics multilayered actuator was also developed for comparison. The multilayered actuator consisted of 9 ceramic layers (36 ㎛ thickness) with an overall actuator thickness of 0.401 mm. The textured and random 0.37PMN-0.29PIN-0.34PT ceramics-based multilayered actuators achieved displacements of 0.61 ㎛ (0.15% strain) and 0.23 ㎛ (0.057% strain) at a low applied peak voltage of 100 V. These results suggest that the developed multilayered actuator using high-performance textured 0.37PMN-0.29PIN-0.34PT ceramics has the potential to replace expensive single crystal-based actuators cost-effectively.

• Journal of the Korean Society of Radiology
• /
• v.83 no.3
• /
• pp.508-526
• /
• 2022

Parkinson's disease (PD) is a movement disorder that develops due to degenerative loss of dopaminergic cells in the substantia nigra of the midbrain. Recent advances in MRI techniques have demonstrated various imaging findings that can reflect the underlying pathophysiological processes occurring in Parkinson's disease. Many imaging studies have shown that such findings can assist in the diagnosis of Parkinson's disease and its differentiation from atypical parkinsonism. In this review, we present MRI techniques that can be used in clinical assessment, such as nigrosome imaging and neuromelanin imaging, and we provide the detailed imaging features of Parkinson's disease reflecting nigrostriatal degeneration.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.955-962
• /
• 2005

This study was conducted to examine the nutrient digestibility and ruminal fermentation characteristics in sheep fed diets containing four substitution levels of E. ulmoides leaves for rice straw. For the experiment, they were given a basal diet consisting of rice straw and concentrate at a 3:7 ratio (DM basis). The treatments were designed as a 4$\time$4 Latin square design with four sheep (50.2$\pm$1.6 kg body weight). Sheep were allotted in one of four treatments, which were designed to progressively substitute Eucommia ulmoides for 0, 3, 5 and 10% of rice straw in the basal diet. The digestibility of crude fat was significantly (p<0.05) improved by 12.5 to 17.5% in 3% and 5% air dried Eucommia ulmoides leaves compared with that in control. The digestibility of crude fiber in the 3, 5 and 10% treatments was significantly (p<0.05) higher than that of the control. Dry matter intake was highest (p<0.05) in sheep fed 10% air dried E. ulmoides). Retained nitrogen in the 3, 5 and 10% treatments was increased up to 97%, 173% and 192%, respectively, compared to that in control (p<0.05). Organic matter utilization was higer in 3% and 5% treatments than control (p<0.05). Purine derivatives and microbial nitrogen synthesis were significantly increased by the dietary substitution of 5 % E. ulmoides leaves (p<0.05) compared with control and the 3% treatment. Ruminal concentration of total-VFA was significantly (p<0.05) higher in sheep fed all levels of air dried Eucommia ulmoides than those of control. It is concluded that air-dried E. ulmoides leaves given to ruminants can increase nutrient digestibility and palatability and improve ruminal fermentation. Therefore, the 5 and 10% substitution of E. ulmoides for roughage are highly recommended to be used in practice.

• Journal of radiological science and technology
• /
• v.37 no.4
• /
• pp.331-339
• /
• 2014

To test feasibility of proton arc therapy (PAT) in the treatment of para-aortic lymph node tumor and compare its dosimetric properties with advanced radiotherapy techniques such as intensity modulated radiation therapy (IMRT) and conventional 3D conformal proton beam therapy (PBT). The treatment plans for para-aortic lymph node tumor were planned for 9 patients treated at our institution using IMRT, PBT, and PAT. Feasibility test and dosimetric evaluation were based on comparisons of dose volume histograms (DVHs) which reveal mean dose, $D_{30%}$, $D_{60%}$, $D_{90%}$, $V_{30%}$, $V_{60%}$, $V_{90%}$, organ equivalent doses (OEDs), normal tissue complication probability (NTCP), homogeneity index (HI) and conformity index (CI). The average doses delivered by PAT to the liver, kidney, small bowel, duodenum, stomach were 7.6%, 3%, 17.3%, 26.7%, and 14.4%, of the prescription dose (PD), respectively, which is higher than the doses delivered by IMRT (0.4%, 7.2%, 14.2%, 15.9%, and 12.8%, respectively) and PBT (4.9%, 0.5%, 14.12%, 16.1% 9.9%, respectively). The average homogeneity index and conformity index of tumor using PAT were 12.1 and 1.21, respectively which were much better than IMRT (21.5 and 1.47, respectively) and comparable to PBT (13.1 and 1.23, respectively). The result shows that both NTCP and OED of PAT are generally lower than IMRT and PBT. This study demonstrates that PAT is better in target conformity and homogeneity than IMRT and PBT but worse than IMRT and PBT for most of dosimetric factor which indicate that PAT is not recommended for the treatment of para-aortic lymph node tumor.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.169-181
• /
• 2007

Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.

• Korean Journal of Ecology and Environment
• /
• v.45 no.4
• /
• pp.474-481
• /
• 2012

This study was performed to investigate the degree of long-term pollution at the mainstream of the Han River by comparing the concentration of BOD and COD from 1975 to 2011. The long-term annual average BOD and COD concentration at the mainstream of the Han River showed an increasing trend as it flowed downstream from Paldang Dam to Gayang. The concentration of BOD ($r^2$=0.646) and COD ($r^2$=0.260) showed a consistent decreasing trend for 37 years. In the case of Paldang Dam, BOD has maintained a decreasing trend, whereas the COD value showed an increasing trend after the 1990s. Therefore, a control of non-biodegradable materials in areas around Paldang Dam is required. The result of the seasonal variations of BOD and COD is as follows: spring>winter>summer and fall (p<0.001). The time series analysis revealed a strong correlation for every 12-month period. Also, the amount of water discharge at Paldang Dam has to be systematically controlled because the amount of water discharge from the dam influences the water quality at the mainstream of the Han River.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.3
• /
• pp.194-198
• /
• 2007

Yield and ginsenoside contents of ginseng (Panax ginseng C. A. Meyer) is affected by light intensity and quality, and the color and the thickness of PE shading net when PE net is utilized for shading material. This study was carried out to investigate the effect of light quality on root yield and ginsenoside contents off-year-old ginseng by using polyethylene shading net with each blue and yellow color, Spectral irradiance under blue and yellow shading net showed the peak at 498 nm and 606 nm, respectively, which made distinct difference in light quality. Heat injury ratio of blue shading net was increased distinctly more than that of yellow shading net in summer season because of higher transmitted quantum (23%)and air temperature (0.3 $^{\circ}$C) in blue shading net than those of yellow shading net. Chlorophyll content and leaf area under yellow shading net were higher than those of blue shading net, and its heat injury ratio was lower than those of blue. These effects may led to 48% higher increase of root yield under yellow shading net than that under blue shading net. The content of total ginsenoside in taproot was not significantly differed between blue and yellow shading net, while the content in lateral and fine root was significantly increased in blue shading net compared to yellow shading net. PDM ratio of blue shading net showed more significant increase in lateral root than that of yellow shading net. All of Rb$_1$/Rg$_1$ ratio in three parts of root under blue shading net was higher than that of yellow shading net, but there were no significant increase in the ratio of lateral root.

• Clinical and Experimental Pediatrics
• /
• v.46 no.9
• /
• pp.883-888
• /
• 2003

Purpose : The etiology of hemolytic anemia can be classified as either cellular or extracellular defects of red blood cells. The aim of this study was to investigate the clinical and laboratory findings of hemolytic anemia concerning its etiological classification. Methods : Clinical and laboratory findings of the patients with hemolytic anemia treated from January 1987 to May 2002 at Severance Hospital were analyzed retrospectively. They were divided into two groups based on the types of red cell defects(group I : erythrocytic defect, group II : extraerythrocytic defect). Results : Twenty one cases were included in group I, thirty four cases in group II, and three cases were unclassified. In group I, nineteen cases(90.5%) were diagnosed as hereditary spherocytosis and were proved to have red cell membrane disorders while two cases(9.5%) were shown to have red cell enzyme deficiencies. In group II, thirteen cases(38.2%) were noted as autoimmune hemolytic anemia, eleven cases(32.4%) as traumatic or microangiopathic hemolytic anemia, four cases(11.8%) as drug induced hemolytic anemia, two cases(5.9%) were related with systemic lupus erythematosus and one case(2.9%) with malignancy. Hemoglobin at the time of diagnosis(7.5 g/dL vs. 6.2 g/dL, P<0.05) and the incidence of splenomegaly(85.7% vs. 18.2%, P<0.05) were higher in group I though blood urea nitrogen(9.0/0.4 mg/dL vs. 27.8/1.6 mg/dL, P<0.05) was higher in group II. Conclusion : Comparing the clinical features of pediatric hemolytic anemia, we concluded as following : In cases associated with extraerythrocytic defect, blood tests revealed significant initial lower hematocrit with higher level of BUN and Cr while cases with erythrocytic defect, splenomegaly were more common noted.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.1
• /
• pp.20-29
• /
• 2010

Naringin has antioxidant and antihyperlipidemic properties, however, phenolic compounds including naringin are unstable in the presence of light, heat and oxygen. Beta-cyclodextrin ($\beta$-CD) is a cyclic heptamer composed of seven glucose units that enhances the stability and solubility of molecules through the formation of inclusion complexes. This study was conducted out to compare the effects of CD-naringin (CD-N) inclusion complexes with naringin on lipid metabolism in high fat-fed animals. Male C57BL/6 mice were fed either CD-N (0.048%, w/w) or naringin (N, 0.02%, w/w) in a 20% high-fat (HFC, 15% lard, 5% corn oil, w/w) diet for 10 weeks. Orlistat (Xenical, 0.01%, w/w) was used as a positive control (PC). There were no differences in body weight, food intake, liver and heart weights, plasma triglyceride(TG), leptin, adiponectin, resistin, IL-$1{\beta}$ and IL-6 concentrations, and hepatic $\beta$-oxidation, carnitine palmitoyl transferase(CPT), glucose-6-phosphate dehydrogenase (G6PD) and malic enzyme activities between the HFC and CD-N groups or between the HFC and N groups. However, both CD-naringin and naringin supplementation les to a significant reduction in the epididymal and perirenal white adipose tissue weights, plasma free fatty acid, insulin and blood glucose concentrations, hepatic cholesterol and TG contents and hepatic fatty acid synthase (FAS), phosphatidate phosphohydrolase (PAP) and HMG-CoA reductase activities compared to the HFC group. The plasma HDL-cholesterol concentration was significantly higher in CD-N and N groups than in HF and PC groups. These results indicate that both CD-naringin and naringin supplementation effectively improved plasma and hepatic lipid metabolism without differences between CD-N and naringin groups.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.1
• /
• pp.1-8
• /
• 1994

The purpose of this study was to evaluate the effect of the canal filling sealer to resin cement When posts were cemented in the endodontically treated teeth, 86 incisors were used. The coronal portion of the teeth were removed at the cemento-enamel junction, every tooth was done treatment of canal. And the teeth was divided was into 12 groups. G : I a n : 7 Treatment : Z.P.C (1 day after Z.O.E. sealer) G : I b n : 7 Treatment : All-Bond (3 day after sealer) G : II a n : 8 Treatemt : Z.P.C (3 day after sealer) G : II b n : 7 Treatemt : All-Bond (3 day after sealer) G : III a n : 8 Treatemt : Z.P.C (7 day after sealer) G : III b n : 8 Treatemt : All-Bond (7 day after sealer) G : IV a n : 7 Treatemt : Z.P.C (1 day after Apexit sealer) G : IV b n : 7 Treatemt : All-Bond (1 day after sealer) G : V a n : 7 Treatemt : Z.P.C (3 day after sealer) G : V b n : 7 Treatemt : All-Bond (3 day after sealer) G : VI a n : 7 Treatemt : Z.P.C (7 day after sealer) G : VI a n : 7 Treatemt : All-Bond (7 day after sealer) Ready made stainless steel Para-post(PD-K-3) was cemented with Z.P.C. in subgroup a, and cemented with All-Bond & composite resin cement in subgroup b to depth 7mm. After 5 days at cementation of post, teeth with cemented posts were mounted on a retention jig and the failure loads of the specimens were measured by an Instron Universal Testing Machine. The results were as follows. 1. The results of failure loads were $15.5{\pm}7.1kg$ in group I b, $21.6{\pm}5.4kg$ in group II b and $20.1{\pm}18.1kg$ in group III b, and there was no statistically significant , difference between each group(p>0.05). 2. The results of failure loads were $19.0{\pm}6.7kg$ in group IV b, $17.3{\pm}6.5kg$ in group V b.and $18.9{\pm}7.9kg$ in group VI b and there was no significant difference between each other(p>0.05). 3. In same condition, the failure load of subgroup a was largely higher the subgroup b. But there was no significant difference between each other(p>0.05).