• Journal of Biomedical Engineering Research
• /
• v.22 no.6
• /
• pp.511-518
• /
• 2001

In vitro corrosion resistance of the commercially used 76.5wt.%Pd-17.6%Cu-7.2%Ga and 77.3%Pd-6.0%Ga dental Prostheses high-Palladium system alloys in cast, degassing and porcelain-firing heat treatment conditions were evaluated by the potentiodynamic polarization technique in the de-aerated 0.9%NaCl and a modified Fusayama electrolyte. From the corrosion rate experimental results, we found that there is a small difference in the corrosion resistance depending on the microstructure. However. it was so small that there is no significant problem as a dental material. The 77.3%Pd-6.0%Ga showed better corrosion resistance than the 76.5%Pd-11.6%Cu-7.2%Ga dental Prostheses high-palladium system alloys. These experimental observations in 76.5%Pd-11.6%Cu-7.2%Ga alleys are mainly due to a rapid quenching and Cu in the alloy which accelerate the eutectic reaction with a segregation and Precipitates in the microstructure. On the ocher hand, 77.3%Pd-6.0%Ga alloys, which are solid-solution matrix, show much better col·lesion resistance compared with that of 76.5%Pd-11.6%Cu-7.2%Ga alloys.

• Physical Therapy Korea
• /
• v.30 no.1
• /
• pp.68-77
• /
• 2023

Background: The weakness of the gluteus medius (GM) is associated with various musculoskeletal disorders. The increasing GM activity without synergistic dominance should be considered when prescribing pelvic drop exercise (PD). Isometric hip extension or flexion of the non-weight bearing leg using thera-band at the ankle during PD may influence hip abductor activities. Objects: To determine how isometric hip extension or flexion of the non-weight bearing leg using thera-band at the ankle during PD influences the activities of three subdivisions of GM (anterior, GMa; middle, GMm; posterior, GMp), tensor fasciae latae (TFL), contralateral quadratus lumborum (QL), and GMp/TFL, GMm/QL activity ratios in patients with GM weakness. Methods: Twenty-three patients with GM weakness were recruited. Three types of PD were performed: PD, PD with an isometric hip extension of the non-weight bearing leg (PDE), and PD with an isometric hip flexion of the non-weight bearing leg (PDF). Surface electromyography (SEMG) was used to measure hip abductor activities. One-way repeated-measures analysis of variance was used to assess the statistical significance of muscle activities and muscle activity ratios. Results: GMa, GMm, and GMp activities were significantly greater during PDF than during PD and PDE (p < 0.001, p = 0.001; p = 0.001, p = 0.005; p = 0.004, p = 0.004; respectively). TFL activity was significantly greater during PDE than during PD and PDF (p < 0.001, p < 0.001, respectively). QL activity was significantly greater during PDF than during PD (p = 0.003). GMp/TFL activity ratio was significantly lower during PDE than during PD and PDF (p = 0.001, p = 0.001, respectively). There were no significant differences in the GMm/QL activity ratio. Conclusion: PDF may be an effective exercise to increase the activities of all three GM subdivisions while minimizing the TFL activity in patients with GM weakness.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.774-780
• /
• 2019

An efficient Pd-coated $La_{0.1}Sr_{0.9}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LSCF-1928) catalyst for total oxidation of methane under landfill gas at low tmeperature has been developed. Synergism was observed between Pd coating and LSCF-1928 substrate. When Pd coating on LSCF-1928, we used electroless plating method and conformed characteristic of catalyst through TPR(Temperature Programmed Reduction) analysis, XRD(X-ray Diffraction) analysis, SEM(Scanning Electron Microscope). The results demonstrated that the Pd coated LSCF-1928 catalysts showed higher performance than non-Pd LSCF-1928. Pd coated LSCF-1928 had low total oxidation temperature of methane (< $475^{\circ}C$) which is lower than total oxidation temperature of methane about non-Pd LSCF-1928 catalysts (= $475^{\circ}C$). Also, $O_2$ conversion rate was higher than non-Pd LSCF-1928 at same temperature.

• Journal of the Korean Chemical Society
• /
• v.46 no.1
• /
• pp.57-63
• /
• 2002

The hydropurification reaction of CTA (crude terephthalic acid) was carried out with hydrogen over PdRu/CCM (carbon-carbonaceous composite material) catalyst in a batch reactor at high temperature. The first order kinetics of hydropurification is confirmed with the linear dependence of ln(4-CBA; 4-carboxybenzaldehyde) with reaction time. The reaction condition studied is thought to represent the hydropurification well because of the linear dependence of catalytic activity on the catalyst weight. The p-toluic acid (p-tol) in solid and liquid increases with the conversion of reaction or the decrease of 4-CBA. However, the benzoic acid (BA) concentration does not depend much on the conversion. The AT (alkali transmittance) does not depend on the 4-CBA when the concentration is higher than about 0.2% which shows the 4-CBA, in itself, does not cause the coloring effect. The AT of PTA depends inversely with the concentration of 4-CBA when the 4-CBA is less than about 0.15%. This may show the coloring materials are removed in parallel with the hydrogenation of 4-CBA. The (0.3%Pd-0.2%Ru)/CCM shows larger residual catalytic activity than a commercial catalyst, 0.5%Pd/C, after using in a commercial reactor even though the former has smaller fresh activity than the latter. The palladium and ruthenium in PdRu/CCM show the synergetic effect in activity when the ruthenium concentration is about $0.2{\sim}0.35$ wt%. It may be supposed that the PdRu/CCM catalyst can be a promising candidate to replace the commercial Pd/C catalyst.

• Economic and Environmental Geology
• /
• v.26 no.3
• /
• pp.327-335
• /
• 1993

Phase relations in the system Pd-Sb-Te were investigated at $1000^{\circ}$, $800^{\circ}$, and $600^{\circ}C$, using the sealed-capsule technique; the quenched products were studied by reflected light microscopy, X-ray diffraction, and electron microprobe analysis. At $1000^{\circ}C$, the solid phases Pd, $Pd_{20}Sb_7$, $Pd_8Sb_3$, $Pd_{31}Sb_{12}$, and $Pd_5Sb_2$ are stable with a liquid phase that occupies most of the isothermal diagram. Additional solid phases at $800^{\circ}C$ are $Pd_5Sb_3$, PdSb, $Pd_8Te_3$, $Pd_7Te_3$, and a continuous $Pd_{20}Te_7-Pd_{20}Sb_7$ solid solution becomes stable. At $600^{\circ}$, $PdSb_2$, $Pd_{17}Te_4$, $Pd_9Te_4$, PdTe, $PdTe_2$, $Sb_2Te_3$, and Sb and continuous PdSb-PdTe and $PdTe-PdTe_2$ solid solutions are stable. All the solid phases exhibit solid solution, mainly by substitution between Sb and Te to an extent that varies with temperature of formation. The maximum substitution (at.%) of Te for Sb in the Pd-Sb phases is: 44.3 in $Pd_8Sb_3$, 52.0 in $Pd_{31}Sb_{12}$, 46.2 in $Pd_5Sb_2$ at $800^{\circ}C$; 15.3 in $Pd_5Sb_3$, 68.3 in $PdSb_2$ at $600^{\circ}C$. The maximum substitution (at.%) of Sb for Te in the Pd-Te phases is 34.5 in $Pd_5Sb_3$ at $800^{\circ}C$, and 41.6 in $Pd_7Te_3$, 5.2 in $Pd_{17}T_4$, 12.4 in $Pd_9Te_4$, and 19.1 in $PdTe_2$ at $600^{\circ}C$. Physical properties and X-ray data of the synthetic $Pd_9Te_4$, PdTe, $PdTe_2$, $Pd_8Sb_3$, PdSb, and $Sb_2Te_3$ correspond very well with those of telluropalladinite, kotulskite, merenskyite, mertieite II, sudburyite, and tellurantimony, respectively. Because X-ray powder diffraction data consistently reveal a 310 peak ($2.035{\AA}$), the $PdSb_2$ phase is most probably of cubic structure with space group $P2_13$. The X-ray powder pattern of a phase with PdSbTe composition, synthesized at $600^{\circ}C$, compares well with that of testibipalladite. Therefore, testibiopalladite may be a member of the $PdSb_2-Pd(Sb_{0.32}Te_{0.68})$ solid solution series which is cubic and $P2_13$ in symmetry. Thus the ideal fonnula for testibiopalladite, presently PdSbTe, must be revised to PdTe(Sb, Te). Borovskite($pd_3SbTe_4$) has not been found in the synthetic system in the temperature range $1000^{\circ}-600^{\circ}C$.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.360-366
• /
• 2006

We have performed density functional theory calculations for the surface structure of O/Pd(100)-p($2{\times}2$), formed by the adsorption of oxygen atoms of 0.25 ML. The oxygen atoms adsorb preferentially at the fourfold hollow site, and the calculated O-Pd bond length is $2,15{\AA}$, The first interlayer spacing ($d_{12}$) of Pd(100) expands by +0.8% due to the oxygen adsorption, which differs from the experimental value of +3.6% reported by a previous LEED study. Assuming that the LEED sample was possibly contaminated by hydrogen atoms, we also examined the effect of hydrogen impurities on the surface structure. Hydrogen atoms adsorbed on O/Pd(100)-p($2{\times}2$) are found to result in large expansions of $d_{12}$ of Pd(100). Our analysis estimates the amount of hydrogen atoms remaining on the LEED sample as -0.3 ML.

• Journal of Periodontal and Implant Science
• /
• v.51 no.2
• /
• pp.124-134
• /
• 2021

Purpose: The aim of this study was to assess the association between the clinical status of rheumatoid arthritis (RA) and periodontitis (PD) in patients diagnosed with PD and to evaluate the impact of RA treatment on the severity of PD. Methods: The study included 148 participants with PD, of whom 64 were also diagnosed with RA (PD+RA group), while 84 age-matched participants were rheumatologically healthy (PD-only group). PD severity was assessed by the following periodontal parameters: clinical attachment loss, probing pocket depth (PPD), bleeding on probing (BOP), alveolar bone loss, and number of missing teeth. RA disease characteristics and impact of disease were evaluated by the Disease Activity Score 28 using C-reactive protein, disease duration, RA treatment, the RA Impact of Disease tool, and the Health Assessment Questionnaire. Outcome variables were compared using parametric and non-parametric tests and associations were evaluated using regression analysis with the calculation of odds ratios (ORs). Results: Participants in the PD+RA group had higher mean PPD values (2.81 ± 0.59 mm vs. 2.58 ± 0.49 mm, P=0.009) and number of missing teeth (6.27±4.79 vs. 3.93±4.08, P=0.001) than those in the PD-only group. A significant association was found between mean PPD and RA (OR, 2.22; 95% CI, 1.16-4.31; P=0.016). Within the PD+RA group, moderate to severe periodontal disease was significantly more prevalent among participants with higher RA disease activity (P=0.042). The use of biologic disease-modifying antirheumatic drugs (bDMARDs) was associated with a lower BOP percentage (P=0.016). Conclusions: In patients with PD, RA was associated with a higher mean PPD and number of missing teeth. The severity of PD was affected by the RA disease clinical activity and by treatment with bDMARDs, which were associated with a significantly lower mean BOP percentage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.8
• /
• pp.1147-1153
• /
• 2000

A total of 9,540 pigs were evaluated for their growth performance to provide information on the development of different feeding strategies to support maximum rate of protein deposition (PD). Large variations in growth performance and protein deposition rate were found in the population used in this study (ADG from 701 to 974 g/day; ADFI from 1,726 to 2,498 g/day; Feed/gain from 2.10 to 2.90; Backfat thickness from 12.4 to 20.5 mm and PD rate from 103 to 153 g/day). It was found that ADG was positively correlated to PD ($R^2=0.9362$, p<0.0001) while FCR was negatively correlated to PD ($R^2=0.4031$, p<0.0001). Backfat thickness was negatively correlated to PD ($R^2=0.7024$, p<0.0001) and to ADG ($R^2=0.5096$, p<0.0001). The estimated lysine requirement based on PD rate also showed large variation (12.37 to 18.38 g/day true ileal digestible lysine on average between 25 and 100 kg), thus strongly indicated the need of separate feeding strategies for each group of pigs. When pigs were divided into three categories according to estimated whole body PD rate, the group of pigs with the highest PD rate grew faster by 6.3 and 13.9% than pigs with intermediate and low PD rate, respectively. Feed utilization was also more efficient in pigs with a high PD rate. It appeared that pigs with high PD rate maintained higher PD rate especially in the later stage of their life. Pigs with high PD rate require an extra amount of 1.2 and 2.4 g/true digestible lysine per day and 0.4 and 0.8% more lysine in the diet than pigs with intermediate and low PD rate during the growing-finishing period respectively. Results of this study suggest that there is a need for separate feeding strategies for individual group of pigs with different PD rate. It should be noted that average value for each group presented in this report is not the adequate amount for an animals potential for maximum PD rate. With recent development in growth modeling and access to computer technologies to facilitate computation, pork producers can easily estimate pigs protein deposition rate and thus can make their own feeding strategies.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.270-274
• /
• 2017

Formic acid has been known as one of key sources of hydrogen. Among various monometallic catalysts, hydrogen can be efficiently produced on Pd catalyst. However, the catalytic activity of Pd is gradually reduced by the blocking of active sites by CO, which is formed from the unwanted indirect oxidation of formic acid. One of promising solutions to overcome such issue is the design of alloy catalyst by adding other metal into Pd since alloying effect (such as ligand and strain effect) can increase the chance to mitigate CO poisoning issue. In this study, we have investigated formic acid deposition on the bimetallic $Pd/Pd_3Fe$ core-shell nanocatalyst using DFT (density functional theory) calculation. In comparison to Pd catalyst, the activation energy of formic acid dehydrogenation is greatly reduced on $Pd/Pd_3Fe$ catalyst. In order to understand the importance of alloying effects in catalysis, we decoupled the strain effect from ligand effect. We found that both strain effect and ligand effect reduced the binding energy of HCOO by 0.03 eV and 0.29 eV, respectively, compared to the pure Pd case. Our DFT analysis of electronic structure suggested that such decrease of HCOO binding energy is related to the dramatic reduction of density of state near the fermi level.

• Journal of the Korean Magnetics Society
• /
• v.23 no.4
• /
• pp.122-125
• /
• 2013

Perpendicular magnetic anisotropy (PMA) is the phenomenon of magnetic thin film which is preferentially magnetized in a direction perpendicular to the film's plane. Amorphous multilayer with PMA has been studied as the good candidate to realization of high density STT-MRAM (Spin Transfer Torque-Magnetic Random Access Memory). The current issue of high density STT-MRAM is a decrease in the switching current of the device and an application of amorphous materials which are most suitable devices. The amorphous ferromagnetic material has low saturated magnetization, low coercivity and high thermal stability. In this study, we presented amorphous ferromagnetic multilayer that consists of an amorphous alloy CoSiB and a nonmagnetic material Pd. We investigated the change of PMA of the $[CoSiB\;t_{CoSiB}/Pd\;1.3nm]_5$ multilayer ($t_{CoSiB}$ = 0.1, 0.2, 0.3, 0.4, 0.5, 0.6 nm, and $t_{Pd}$ = 1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6 nm) and $[CoSiB\;0.3nm/Pd\;1.3nm]_n$ multilayer (n = 3, 5, 7, 9, 11, 13). This multilayer is measured by VSM (Vibrating Sample Magnetometer) and analyzed magnetic properties like a coercivity ($H_c$) and a magnetization ($M_s$). The coercivity in the $[CoSiB\;t_{CoSiB}\;nm/Pd\;1.3nm]_5$ multi-layers increased with increasing $t_{CoSiB}$ to reach a maximum at $t_{CoSiB}$ = 0.3 nm and then decreased for $t_{CoSiB}$ > 0.3 nm. The lowest saturated magnetization of $0.26emu/cm^3$ was obtained in the $[CoSiB\;0.3nm/Pd\;1.3nm]_3$ multilayer whereas the highest coercivity of 0.26 kOe was obtained in the $[CoSiB\;0.3nm/Pd\;1.3nm]_5$ mutilayer. Additional Pd layers did not contribute to the perpendicular magnetic anisotropy. The single domain structure evolved in to a striped multi-domain structure as the bilayer repetition number n was increased above 7 after which (n > 7) the hysteresis loops had a bow-tie shapes.