• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1178-1182
• /
• 2011

The best methods for distribution controled of LED lighting fixtures is control to designed LED chip array, lens and reflector. However, lens design need distribution design to reflector for low-wattage LED lighting because of difficulty of production and reduction of light efficiency. In addition, it needs maximize of thermal performance to improve the efficiency and reliability of device. As a result, for the height of reflector 40[mm] and Inclination 25[$^{\circ}$], we can see the best distribution properties, and, in the thermal properties, junction temperature MCPCB 62.9 [$^{\circ}C$], FR4 PCB 89.6 [$^{\circ}C$], FR4 PCB from Via-hole is 63.1 [$^{\circ}C$]. it may improve for thermal properties for makes the Via-hole.

• 대한생식의학회:학술대회논문집
• /
• 2003.12a
• /
• pp.144-145
• /
• 2003

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.3
• /
• pp.130-138
• /
• 2010

The thermal reliability of the closed-type BLDC motor for the high speed axial fans is analyzed by a numerical method in this paper. Since the module and the motor part are combined in a closed case, the heat generated from a rotor in the motor and the electronic components in the PCB module can not be effectively removed to the outside. Therefore the module will easily fail by high temperature. The accelerated-life testing was accomplished to formulate the life equation and numerical method is used to predict the inside temperature of the PCB module, which is one of the life equation parameter according to the environment. When the environment temperature of BLDC motor is 21, 35 and 50 $^{\circ}C$, the temperature in the PCB space is predicted as 73.4, 87.5 and 102.4 $^{\circ}C$. Then the life time with the temperature are calculated as 2,239, 863 and 328 hours.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.494-499
• /
• 2007

The thermal reliability of the closed-type BLDC motor for the high speed axial fans is analyzed by a numerical method in this dissertation. Since the module and the motor part are combined in a closed case, the heat generated from a rotor in the motor and the electronic components in the PCB module can not be effectively removed to the outside. Therefore the module will easily fail by high temperature. The accelerated-life testing was accomplished to formulate the life equation and numerical method is used to predict the inside temperature of the PCB module, which is one of the life equation parameter according to the environment. The experiment for measuring the surface heat flux of the electronic components is carried out to apply the boundary condition of numerical study. When the environment temperature of BLDC motor is 21, 35 and $50^{\circ}C$, the temperature in the PCB space is predicted as 73.4, 87.5 and $102.4^{\circ}C$. Then the life time with the temperature are calculated as 2,239, 863 and 328.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1555-1558
• /
• 2005

In this study, we measured cylindricity and Runout of the air bearing spindle, and tested PCB(printed circuit boards) drilling with 0.4mm micro drill at 90,000rpm and 110,000rpm in order to obtain drilling hole error. Results are as follows; The air bearing spindle's Runout was not so high within $10\mu{m}$ from 20,000rpm to 80,000rpm but it grew after 80,000rpm. Drilling hole size error was 9% at 80,000rpm and 12% at 110,000rpm because of spindle's Run out. Drilled hole shape falsified more 110,000rpm than 90,000rpm.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.930_931
• /
• 2009

본 논문에서는 잉크젯 프린팅 기술을 이용하여 FPCB의 미세패턴 전극회로를 구현하였다. 이를 위하여 압전 잉크젯헤드에 의한 잉크드롭제어에 의해 전도성 잉크의 프린팅이 가능하도록 구현하였다. 그 동안 PCB 제작은 포토리소그라픽 공정에 의해 13단계 공정을 통하여 제작함으로써 폐수에 의한 환경오염, 비경제적인 비용, 긴 공정시간을 요구하였지만, 잉크젯 프린팅 기술을 적용함으로써 3단계로 공정간소화, 공정시간 단축, 비용절감의 효과를 얻을 수 있었다. 잉크젯 헤드는 당사에서 제작한 128노즐을 적용하였으며 이러한 결과 다음사양을 얻을 수 있었다. 인쇄 전극의 선폭 50um, 선폭 균일도 <15%, 패턴, 패턴 건조 큐어링 온도는 $150^{\circ}C$ 15분, 인쇄 속도 250mm/s, 720 dpi 분해능의 결과를 얻을 수 있었다.

• ALGAE
• /
• v.27 no.1
• /
• pp.63-70
• /
• 2012

Algae are sensitive to a wide range of pollutants, and are effective bioindicators in ecotoxicity assessments. Here, we evaluated the sub-lethal sensitivity of the marine dinoflagellate Cochlodinium polykrikoides upon exposure to copper (Cu), lead (Pb), bisphenol A (BPA), and Aroclor 1016 (polychlorinated biphenyl, PCB). Toxic effects were assessed by observations of the reduction in cell counts and chlorophyll a levels after exposure to each toxicant. C. polykrikoides displayed dose-dependent, sigmoidal responses when exposed to the tested chemicals. $EC_{50}$-72 h values for Cu, Pb, BPA, and PCB were 12.74, 46.70, 68.15, and $1.07mg\;L^{-1}$, respectively. PCB, which is an endocrine-disrupting chemical, was the most sensitive, proving its toxic effect on the dinoflagellate. This study provides baseline data on the toxic effects of commonly used heavy metals and endocrine-disrupting chemicals to a marine dinoflagellate.

• International Journal of Quality Innovation
• /
• v.2 no.2
• /
• pp.69-92
• /
• 2001

The laser-assisted seeding (LAS) process has potential to replace conventional electroless copper plating in Printed Circuit Board (PCB) manufacturing since it combines the steps of laser drilling and plating into one single process. In the LAS process, the single extra LAS step can metallize a microvia. Thus, the process steps can be greatly reduced and the productivity enhanced, but also the high aspect ratio microvias can be metallized. The objectives of this paper are to study the LAS copper thickness within PCB microvias and the thermal reliability of the microvias produced by this process. It was found that results were satisfactory in both the reliability test and also the LAS copper thickness which both comply with IPC standard, the copper thickness produced by the LAS process is sufficient for subsequent electro-plating process. The reliability of the microvias produced by LAS process is acceptable which are free from any voids, corner cracks, and distortion in the plated copper.

• Journal of the Korea Society for Simulation
• /
• v.14 no.2
• /
• pp.25-34
• /
• 2005

Determination of component mounting sequence on printed circuit board assembly process is a typical NP-hard problem. It is a kind of traveling salesman problems, but it has one more hard to meet constraint of matching component type per mounting position as well as searching the shortest path. An efficient method is developed by separation of crowed area and allowing up to two slots per component type. A simulation model is constructed using Visual C++ for evaluation of the suggested heuristic.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11a
• /
• pp.447-450
• /
• 2002

자동배치 시스템의 논 그리드 방식인 Shape based 방식은 영역처리 방식을 사용하므로 shape들을 메모리에 각각의 객체로서 존재시키려, 이들 객체는 고유의 데이터 크기를 갖기 때문에 메모리가 상당히 적게 소요된다. 그러므로 본 논문에서는 최단경로를 이용하여 여러 목적지에 가장 빠르게 도달 할 수 있는 auction 알고리즘인 그래프감소 기법을 적용하여 Shape based 방식에 의하여 메모리 낭비 없이 빠른 속도로 자동 배치한 수 있는 PCB자동 배치 시스템을 개발하였다. 또한 본 시스템은 이와 같은 방식을 이용하여 PC에서 사용할 수 있도록 IBM Pentium 컴퓨터의 Windows 환경에서 Visual C++언어로 개발하였다.