• The Korean Journal of Ecology
• /
• 제13권2호
• /
• pp.143-148
• /
• 1990

During the autumn of 1985, the stem cortex of Salix pseudo-lasiogyne on the street sides in Seoul city was collected by a cork borer. The contents of S, Pb and Cd in this sample were determined. The ranges of S, Pb and Cd contents in all the samples were 0.98-3.46$\mu$/g, 0.77-1.81$\mu$g/g and 0.12-0.28$\mu$/g, respectively. Areas which slowed the highest level of S, Pb and Cd in the stem cortex were Yongon-dong, Yongdungp o, Ulchiro, Ch ongnyangni, Shinch on and Suyu-dong, Yongdungp o, Ulchiro and Ch ongnyangni, and Yongon-dong, Yongdungp o and Ch ongnyangni, respectively

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.53-56
• /
• 2009

At room-temperature, a facile, seedless, and environmentally benign green route for the synthesis of star like PbS nanoclusters at 7 min in aqueous solution of 1-ethyl-3-methylimidazolium ethyl sulfate, [EMIM] [$EtSO_{4}$], room-temperature ionic liquid (RTIL), via ultrasonic irradiation is proposed. The X-ray diffraction studies display that the products are excellently crystallized in the form of cubic structure. An energy dispersive X-ray spectroscopy (EDX) investigation reveals the products are extremely pure. The absorption spectra of the product exhibit band gap energy of about 4.27 eV which shows an enormous blue shift of 3.86 eV that can be attributed to very small size of PbS nanoparticles produced and quantum confinement effect. A possible formation mechanism of the PbS nanoparticles using ultrasonic irradiation in aqueous solution of the RTIL is presented.

• 한국환경과학회지
• /
• 제6권1호
• /
• pp.61-67
• /
• 1997

미생물에 의한 흡착법으로 중금속을 효과적으로 제거, 회수할 수 있다. 알콜 발효 후 부산물로 생성되는 폐 Saccharomyces cerevisiae는 비교적 가격이 저렴하고, 중금속 생체흡착에 유용한 자원으로 이용될 수 있다. 생체흡착 실험에 사용된 미생물은 부유 및 alginate에 고정화된 S. cerevisiae로 수행하였다. 회분식 실험에서 생체흡착량은 Pb > Cu > Cd의 순으로 이루어졌다. Pb 이온의 흡착 평형은 Freundlich와 Langinuir 모델로 설명하였고, Freundlich 모델이 실험자 료와 잘 부합되었다 고정화된 S. cerevisiae를 이용한 혼합용액( Pb, Cu, Cr 및 Cd )흡착 실험에서 각 중금속들은 선택적 흡착 특성을 나타내었다. 고정화 미생물을 고정층 반응기에 충진하여 혼합 중금속 용액의 생체흡착 실험을 수행한 결과 Pb 이온이 가장 많이 흡착을 하였다. 고정화된 미생물에 흡착된 Pb의 탈착실험에서 0.1M의 HCI 및 $H_2SO_4$가 효과적이었다.

• Electronic Materials Letters
• /
• 제14권6호
• /
• pp.700-711
• /
• 2018

CdS synthesized by the chemical bath method at $70^{\circ}C$, has been used as an electron transport layer in the planar structure of the perovskite solar cells. A two-step spin process produced a mixed halide perovskite of $CH_3NH_3PbI_{3-x}Cl_x$ and a mixture of $PbCl_2$ and $PbI_2$ was deposited on CdS, followed by a sub-sequential reaction with MAI ($CH_3NH_3I$). The added $PbCl_2$ to $PbI_2$ in the first spin-step affected the structure, orientation, and shape of lead halides, which varied depending on the content of Cl. A small amount of Cl enhanced the surface morphology and the preferred orientation of $PbI_2$, which led to large and uniform grains of perovskite thin films. In contrast, the high content of Cl produces a new phase PbICl in addition to $PbI_2$, which leads to the small and highly uniform grains of perovskites. An improved surface coverage of perovskite films with the large and uniform grains maximized the performance of perovskite solar cells at 0.1 molar ratio of $PbCl_2$ to $PbI_2$. The depth profiling of elements in both lead halide films and mixed halide perovskite films were measured by Rutherford backscattering spectroscopy, revealing the distribution of chlorine along with the thickness, and providing the basis for the mechanism for enhanced preferred orientation of lead halide and the microstructure of perovskites.

• 공업화학
• /
• 제7권3호
• /
• pp.453-463
• /
• 1996

$NH_4Cl$을 염소화제로 사용하여 시약 PbS와 Pb함유 자연광물인 방연광의 염소화 반응에 대해 조사하였다. 방연광의 적정 염소화 반응조건은 반응온도 $425^{\circ}C$, 방연광에 대한 $NH_4Cl$의 무게비 4.0, 반응시간 2시간이었다. 이 조건하에서 방연광중의 PbS는 $NH_4Cl$에 의해 효과적으로 $PbCl_2$로 염소화되었으며 그 전화율은 90%였다. 방연광의 염소화 반응에서 염소화제로 사용한 $NH_4Cl$은 $NH_3$와 HCl로 효과적으로 분리되었으며 양론적으로 90%의 $NH_3$를 회수할 수 있었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권7호
• /
• pp.652-659
• /
• 1996

Sintering characteristics and electrical properties of xPb(Mg$_{1}$8/Te$_{1}$8/Mn$_{1}$4/Nb$_{1}$2/) $O_{3}$-(1-x) Pb (Zr$_{1}$2/ $Ti_{1}$2/) $O_{3}$ (x=0.075, 0.1, 0.125) ceramics are investigated. A sintering temperature of ceramics could be reduced to 950.deg. C by a reaction between PbO and B site compound material. The physical properties of 0.1Pb(Mg, Te, Mn, Nb) $O_{3}$ - 0.9Pb(Zr, Ti) $O_{3}$ bulk ceramic with 3wt% glass frit(0.857PbO-0.143W $O_{3}$) were following : den = 7.95 g/cm$^{3}$, T$_{c}$=340.deg. C, .epsilon.$_{33}$= 754, k$_{31}$=0.3 and Q.=1780. The 3-layer piezoelectric transformer by using a tape casting method showed a good monolithic structure, and its voltage setup ratio was 2.5 times higher than that of a single device by using bulk ceramics.s.s.

• 한국환경과학회지
• /
• 제10권4호
• /
• pp.269-273
• /
• 2001

Biosorption of Pb was evaluated for plants, Persicaria chinensis, Oenanthe javanica and Salvinia natnas. The adsorption equilibrium was reached in about 1hr for Pb and the highest adsorption capacity was 150mg Pb/g biomass at S.natans. Pb adsorption process showed a pseudo second order irreversible reaction. The highest initial adsorption rate was 2000mg pb/g biomass/hr at O.javanica. In spite of pH variation, Pb adsorption capacity by was selection, Pb was selectively adsorved. The selectivity of mixture solution showed the adsorption order of Pb>Cu>Cr>Cd. The Pb adsorption capacity of P. chinensis pretreated with NaOH was increased by 30% in comparison with that of no treatment.

• 대한전기학회논문지
• /
• 제41권5호
• /
• pp.508-516
• /
• 1992

In this study, dielectric and piezoelectric properties of 0.05Pb(AlS12/3TWS11/3T)OS13T-0.95Pb(ZrS10.52TTiS10.48T)OS13T system ceramics were investigated with respect to the variations of MnOS12T and FeS12TOS13T additions amounts. The results obtained in this study are summarized as follows: 1. As the amounts of MnOS12T and FeS12TOS13T are increased, tetragonality(c/a) and apparent density were decreased but grain size was increased, also the limits of solubility were revealed because pores were formed at the amounts of 0.3wt% MnOS12T and 0.5wt% FeS12TOS13T. 2. AS the increasing of amounts of MnOS12T and FeS12TOS13T, the temperature of phase transition(TS1cT) was decreased, and pemeability had maximum value at the amount of 0.3wt% MnOS12T but were sharply decreasd for the increasing FeS12TOS13T amounts. 3. As the amounts of MnOS12T and FeS12TOS13T are increased, the electro-mechanical coupling factor(kS1pT) was decreased from 60% to 41%, 19% respectively, but mechanical quality factor(QS1mT) had maximum values 720 for amount of 0.3wt% MnOS12T and 320 the amount of 0.5wt% FeS12TOS13T.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.93-96
• /
• 2002

원자층증착법으로 제조한 청색 CaS:Pb 박막 형광체에 대한 열처리 및 전자빔 조사 효과찰 연구하였다. CaS:Pb 형광 박박의 열처리는 500 - $700^{\circ}C$ 온도범위에서 급속 열처리 공정으로 수행하였고, 1 kV, $20{\mu}A/cm^{2}$ 조건의 전자빔을 연속적으로 조사하여 열화를 가속시킨 후 처리 전, 후의 재료 및 cathololuminescence (CL) 특성을 비교 분석하였다. 원자층증착법으로 성장한 CaS:Pb 박막은 화학적 조성과 결정성이 우수하여 후속 열처리에 의해 발광특성이 크게 증가하는 경향을 보이지 않았으며, 전자빔에 의한 열화 정도는 판매되고 있는 형광체에 비하여 오히려 적었다. CL 강도가 초기값의 50%로 감소할 때까지 전자빔을 조사한 후에도 주목할만한 결정성 및 조성의 변화는 관찰되지 않았으나 전자빔 조사에 의해 표변에 두께 10 nm 내외의 탄소오염층이 형성됨을 알 수 있었다.

• Environmental Engineering Research
• /
• 제10권3호
• /
• pp.112-121
• /
• 2005

The effectiveness of quicklime-based stabilization/solidification (S/S) in immobilizing lead (Pb) was assessed by performing semi-dynamic leaching tests (ANS16.1). In order to simulate landfill leaching conditions, the ANS 16.1 test was modified by using 0.014 N acetic acid (pH = 3.25) instead of distilled water. Artificial soil samples as well as field soil samples contaminated with Pb were tested. The effectiveness of quicklime treatment was evaluated by determining diffusion coefficients ($D_e$) and leachability indices (LX). A model developed by de Groot and van der Sloat was used to elucidate the controlling Pb leaching mechanisms. Overall, upon quicklime treatment Pb leachability was significantly reduced in a]l of the samples tested. The mean LX values were higher than 9 for an artificial soil sample containing 30% kaolinite treated with 10% quicklime and for a field soil sample treated with 10% quicklime, which suggests that S/S treated soils can be considered acceptable for "controlled utilization". Moreover, quicklime treatment was more effective in artificially contaminated soil with high kaolinite content (30%), indicating the amount of clay plays an important role in the success of the treatment. The controlling Pb leaching mechanism was found to be diffusion, in all quicklime treated samples.