• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.2
• /
• pp.147-151
• /
• 1986

A study was carried out to investigate yield, yield components, and change of chemical components in rice plants grown under different concentration of lead compound in nutrient solution of sandy culture. The results obtained are as follows. 1. Increasing lead concentration in culture solutions, pb content in the plant was increased and crop yields were decreased. 2. The critical pb concentration at which yield was declined, was 13.6 ppm. 3. As adding higher concentration of lead in nutrient solutions, concentration of lead in rice plant was significantly increased on leaf blade, and brown rice in pb. 4. Yield loss was closely related to pb content in leaf blade.

• Journal of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.238-243
• /
• 1984

Three component $Ag_2S-PbS-PbMoO_4$ electrodes have been prepared and evaluated for sensitivity to molybdate. The 64.5 : 14.0 : 21.5(w/w%) composition is superior in terms of potentiometric response, stability, rapidity of response and reproducibility. Testing was done over the concentration range of $10^{-1}{\sim}10^{-5}M\;MoO_4^{2-}\;in\;0.1F\;NH_4Ac-NH_4OH$ buffer solution at pH 7.95 with constant ionic strength. $I^-,\;Cl^-,\;Br^-\;and\;CN^-$, etc. interfere.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.383-387
• /
• 2014

In this paper, for a new detection system development with the better accurate dose evaluation and beam distribution imaging using the small field irradiation of linear accelerator, the compound semiconductor based detection sensors were fabricated and the performance evaluation was investigated. The special particle-in-binder sedimentation was used for a large area film sensor fabrication. The detection properties for high energy x-rays were investigated from a dark current, an output current, a rising time, a falling time, and response delay measurement. The experimental results, the $TiO_2$ mixed $HgI_2$ sensor showed the best electrical characteristics than $PbI_2$, PbO, pure $HgI_2$. Linearity, repeatability, and accuracy tests from LINAC were tested, the $TiO_2$ mixed $HgI_2$ sensor showed the better performance than the commercially available dosimetry devices.

• Economic and Environmental Geology
• /
• v.43 no.3
• /
• pp.269-278
• /
• 2010

We investigated characteristics of the coloring material of Dancheong pigments and hope that this study contributes the revival of traditional Dancheong pigments color. For this purpose, we collected Dancheong fragment samples that fell off naturally from old wooden buildings in Gwangju and Jeonnam and analyzed the natural coloring material by XRD and EDS-SEM analysis method. In white pigments of Dancheong fragments, it is confirmed that gypsum$(CaSO_{4}{\cdot}2H_{2}O)$, quartz$(SiO_{2})$, white lead$(PbCO_{3})$ and calcite$(CaCO_{3})$ which have been used for white pigments since ancient times and $TiO_{2}$ which is common used in modern times. In red pigments of Dancheong fragments, it is confirmed that hematite$(Fe_{2}O_{3})$ and red lead$(Pb_{3}O_{4})$, which have been used for red pigments since ancient times and C.I. pigment orange $13(C_{32}H_{24}C_{12}N_{8}O_{2})$ but there is no cinnabar(HgS) which has been used since B.C. 3000 in China. In yellow pigments of Dancheong fragments, it is confirmed that crocoite$(PbCrO_{4})$ and massicot(PbO). In blue pigments of Dancheong fragments, it is confirmed that sodalite$(Na_{4}BeAlSi_{4}O_{12}Cl)$ and nosean $(Na_{8}Al_{6}Si_{6}O_{24}SO_{4})$ as coloring material of blue pigment and C.I. pigments blue $29(Na_{7}Al_{6}Si_{6}O_{24}S_{3})$ which is used in modern times. In green pigments of Dancheong fragments, it is confirmed that calumetite$(Cu(OHCI)_{2}{\cdot}2H_{2}O)$, escolaite(Cr2O3), dichromium trioxide$(Cr_{2}O_{3})$, emerald green$(C_{2}H_{3}As_{3}Cu_{2}O_{8})$, and C.I. pigments green$(C_{32}H_{16}-XCl_{x}Cu_{8})$ which is used in modern time. In black pigments of Dancheong fragments, Chiness ink(carbon black) is confirmed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.374-374
• /
• 2010

본 연구는 Roll-to-Roll Sputtering 장비를 사용하여 제작된 Flexible ITO electrode 필름의 방사선 검출기로의 적용가능성을 알아보기 위해 기존의 Glass ITO electrode의 전기적 특성을 비교 평가하였다. 본 연구는 Flexible ITO electrode와 Glass ITO electrode을 하부전극으로 형성하고, 최근에 X-ray 변환체로 활발히 연구되고 있는 Powder 형태의 반도체물질인 HgI2 와 PbI2를 Binder와 일정한 비율로 혼합하여 3-Rolls-Miller를 사용하여 Powder를 일정한 미세크기로 만들고, 대면적 제작이 용이한 Screen-Printing method을 이용하여 시편을 제작하였다. 제작된 필름은 하부전극의 종류에 따른 X-ray 입사 후의 전기적신호의 차이를 측정하고, HgI2와 PbI2 중 Flexible ITO electrode와 더욱 효율적으로 반응하여 기존의 Glass ITO electrode를 대체할 수 있는 전극을 발견하여 진단용 의료영상의 왜곡 현상을 제거할 수 있는 Flexible 방사선 검출기의 제작의 초석을 제공하는 연구를 목적으로 한다. SEM(Scanning Electron Microscope) 통하여 반도체 물질의 결정구조와 크기를 알아보았고, 하부 전극의 종류에 따른 전기적 신호검출을 위해 제작된 필름의 암전류(Dark current) 와 민감도(Sensitivity)를 측정한 후, SNR (Signal -to- Noise)을 계산하여 평가하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.3
• /
• pp.13-19
• /
• 2018

The soldering property of Pb-containing solder(Sn-Pb) and Pb-free solders(Sn-3.0Ag-0.5Cu and Sn-1.0Ag-0.7Cu-1.6Bi-0.2In) for solar combiner box module was compared. The solar combiner box module was composed of voltage and current detecting modules, diode modules, and other modules. In this study, solder paste printability, printing shape inspection, solder joint property, X-ray inspection, and shear force measurements were conducted. For optimization of Pb-free soldering process, step 1 and 2 were divided. In the step 1 process, the printability of Pb-containing and Pb-free solder alloys were estimated by using printing inspector. Then, the relationship between void percentages and shear force has been estimated. Overall, the property of Pb-containing solder was better than two Pb-free solders. In the step 2 process, the property of reflow soldering for the Pb-free solders was evaluated with different reflow peak temperatures. As the peak temperature of the reflow process gradually increased, the void percentage decreased by 2 to 4%, but the shear force did not significantly depend on the reflow peak temperature by a deviation of about 0.5 kgf. Among different surface finishes on PCB, ENIG surface finish was better than OSP and Pb-free solder surface finishes in terms of shear force. In the thermal shock reliability test of the solar combiner box module with a Pb-free solder and OSP surface finish, the change rate of electrical property of the module was almost unchanged within a 0.3% range and the module had a relatively good electrical property after 500 thermal shock cycles.

• Conservation Science in Museum
• /
• v.2
• /
• pp.57-68
• /
• 2000

This study is a scientific analysis of 12 bronze materials which were excavated from Sanoisa temple in Chongju. Analysis of crystalline shape, size and distribution of the each sample metal suggested that they can be classified as tableware(wrought), vessels for memorial service(casting) and bell bronze, which is the same result as classification based on elemental composition. Most of the tableware are forging wares with composition of 8:2:0 in Cu:Sn:Pb, and vessels for memorial service are casting wares whose composition is 7:1:2 in Cu:Sn:Pb, and bell bronze's composition is Cu:Sn:Pb = 85:10:5/9:1:0. The result clearly shows that composition is closely related with usage and manufacturing method of wares. Trace elements such as Co, Fe and As are the elements with high correlation coefficient with Cu, which means they exist as impurities in Cu, and the content of As showed an increase in the order of tableware, memorial service vessels and bell bronze. In addition, the analysis of lead isotope ratio showed that 3 bronze materials with high lead content were made from the lead coming from Japan and China. The composition of the solder was Cu:Sn:Pb = 83:12:5 where small Pb crystals were distributed evenly.

• Journal of Environmental Science International
• /
• v.10 no.4
• /
• pp.293-298
• /
• 2001

The toxicity values heavy metals were evaluated by immobilization and chronic reproduction impairment tests, using Daphnia magna. Acute tests were evaluated by the inhibition of their mobilization after 24hrs without food addition. The tests of reproductive impairment were investigated for 21 days by food addition and exchange or water. The effect of each concentration was assessed by Probit analysis and t-test. The results obtained from this study were as follows : 1) The change of pH and DO was not significant in the acute tests, while, in the reproductive tests, pH was increased by 0.3~1.4 and DO also increased. 2) The $E_iC_{50}$ values of immobilization to Daphnia magna in artificial fresh water were $0.030mg/{\ell}(Cu),\;0.054mg/{\ell}(Cd),\;0.12mg/{\ell};(Cr),\;0.74mg/{\ell}(Pb),\;3.4mg/ {\ell}(As)$ and the $NOE_iC$ values were $0.010mg/{\ell}(Cu),\;0.018mg/{\ell}(Cd),\;0.010mg/{\ell}(Cr),\;0.10mg/{\ell}(Pb),\;and\;$1.8mg/{\ell}(As)$. 3) The $E_rC_{50}$ values of reproductive impairment to Daphnia magna were $13.8\mu\textrm{g}/{\ell}(Cu),\;2.9\mu\textrm{g}/{\ell}(Cd),\;15.5\mu\textrm{g}/{\ell}(Cr),\;61.7\mu\textrm{g}/{\ell}(Pb),\;759\mu\textrm{g}/{\ell}(As)$, and $NOE_rC$ values were $0.95\mu\textrm{g}/{\ell}(Cu),\;$0.54\mu\textrm{g}/{\ell}(Cd),\;1.2\mu\textrm{g}/{\ell}(Cd),\;$7.4\mu\textrm{g}/{\ell}(Pb),\;110mu\textrm{g}/{\ell}(As)$. The results of tests using OECD artificial culture water were more sensitive than natural water for culturing. The presented data show that an artificial culture water is suitable in the experiment of bioassay for assessing the toxicity of marterials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.563-566
• /
• 2000

The effect of CuO and CuO-B $i_2$ $O_3$ additives on microwave dielectric properties of (P $b_{0.45}$C $a_{0.55}$)[F $e_{0.5}$N $b_{0.5}$)$_{0.9}$S $n_{0.1}$] $O_3$were investigated to decrease the sintering temperature for usage of Low Temperature Co-firing Ceramics (LTCC). The (P $b_{0.45}$C $a_{0.55}$)[F $e_{0.5}$N $b_{0.5}$)$_{0.9}$S $n_{0.1}$] $O_3$ceramics was sintered at 11$65^{\circ}C$. In order to decrease the sintering temperature, CuO and Cuo-B $i_2$ $O_3$ were added in the (Pb,Ca)[(Fe,Nb)Sn] $O_3$ with CuO-B $i_2$ $O_3$. For the addition of 0.4 wt.% CuO, the sintered density and the dielectric constant of the ceramics were revealed the maximum values of the 6.06g/c $m^2$ and 83 respectively and temperature coefficient of resonance frequency ($\tau$$_{f}$) shifted to the positive value. As increasing B $i_2$ $O_3$to the (Pb,Ca)[(Fe,Nb)Sn] $O_3$ with CuO-B $i_2$ $O_3$with 0.2 wt.% CuO, the sintered density, the $\varepsilon$$_{r}$ and the Q was decreased, and $\tau$$_{f}$ was minimized at 0.2 wt.% CuO, and 0.2 wt.% B $i_2$ $O_3$. For this composition, dielectric properties were $\varepsilon$$_{r}$ of 81, Q. $f_{0}$ of 4400 GHz, and $\tau$$_{f}$ of 5 ppm/$^{\circ}C$ at sintering temperature of 100$0^{\circ}C$. the relationship between the microstructure and properties of ceramics was studied by X-ray diffraction(XRD), scanning electron microscopy(SEM).copy(SEM).oscopy(SEM).copy(SEM).EM).

• Korean Journal of Materials Research
• /
• v.7 no.1
• /
• pp.33-39
• /
• 1997

Single phase pero~~skite lead lanthanum titanate thin films were fabricated on $Pt/Ti/SiO_2/Si$ substrates at the temperature of $480^{\circ}C$ by electron cyclotron resonance plasma-enhanced chemical vapor deposition (ECR PECVD) using metal organic sources $Pb(DPM)_2$ pre-flowing treatment in ECIi oxygen plasma before fabricating PLT films 11romote the perovskite nucleation due to stable supplying of the $Pb(DPM)_2$ and providing the F'h-rich atmosphere in the early stage of deposition. $Pb(DPM)_2$ pie-flonring treatment enhanced the properties of PLT films. The charactcristics of the PLT filrris were investigated as a tunction of the flow rate of Ti-source. The PL'i' films were grown in a perovskite structure tvith (100) preferred orientation. The high X-ray diffraction intensity and dielectric constant were obtained from the stoichiometric perovskite $(Pb,La)TiO_3$.