• 제목/요약/키워드: PbI2

검색결과 519건 처리시간 0.035초

건설용 재료로서 상동광산광미의 활용성 검토 (Availability Review of Tailings from the Sangdong Tungsten Mine as a Material for Construction)

  • 김용직;김영진;최연왕;김상철
    • 한국건설순환자원학회논문집
    • /
    • 제1권3호
    • /
    • pp.204-210
    • /
    • 2013
  • 상동지역 중석광 광미의 품질 특성을 파악하기 위해 XRD 및 PSA를 사용하여 광물학적인 특성을 검토하였다. XRD분석 결과 상동지역 중석광 광미내에는 석영(quartz), 녹니석(chlorite), 회장석(anorthite) 그리고 코디에라이트(cordierite) 등이 함유되어 있는 것으로 파악되었다. 또한, 상동지역 중석광 광미의 용출 특성을 파악하기 위해 광미를 혼합한 모르터를 제작하여 KSLT의 규정에 의해 실험한 결과 폐기물 관리법 시행규칙에 제시된 유해물질 함유 기준값 보다 낮은 결과를 나타내었으며, 특히, 고루슬래그 미분말의 혼합률이 증가할수록 중금속의 농도는 감소함을 알 수 있다.

능동형 박막 광도파로 칼슘 이온 센서의 개발 (Development of Active thin Film Optical Waveguide $C^{2+}$ -ion Sensor)

  • 이수미;강신원
    • 전자공학회논문지SC
    • /
    • 제37권4호
    • /
    • pp.49-54
    • /
    • 2000
  • 고분자 이온 감응막을 광도파로로 이용한 새로운 형태의 센서소자를 제작하여 칼슘이온의 농도 변화에 따른 그 특성을 평가하였다. 광도파로 소자는 실리카 유리기판에 기존의 반도체 사진식각법 (photolitho-graphy)을 이용하여 도파로가 형성되어질 부분을 에칭한 후 감지막을 스핀코팅법으로 코팅하여, 그 자체를 도파로로 이용한 고속 응답의 새로운 형태의 센서소자를 제작하였다. 도파로로 사용된 감지막은 칼슘이온에 대해 특이성을 가지는 변색성 이온감응물질인 ETH5294, 중성이온감응물질인 K23El, anionic site인 NaTm(CF/sub 3/)/sub 2/PB, 가소제인 DOP 및 PVC-PVAC-PVA 폴리머를 THF 용매에 녹여 스핀 코팅법으로 제작하였다. 여러 가지 변수에 따른 센서의 특성을 평가하기 위하여 도파로의 두께(즉, 감지막의 두께), 변색성 이온감응물질의 농도, 각 모드 변화에 따른 센서의 감응특성을 비교 평가하였다. 제작된 센서는 칼슘이온에 대해 1×10­6∼1M의 측정 범위를 가지며, 1×10­⁴∼1×10­¹M 영역에서 선형성을 가지며, 기존의 광학적 측정 방법인 분광분석법에 비해 높은 감도를 나타냄을 확인하였다.

  • PDF

무연 BaTiO3-(Bi0.5K0.5)TiO3 PTCR 세라믹과 PTCR 특성에 미치는 Nb2O5의 효과 (Lead-free BaTiO3-(Bi0.5K0.5)TiO3 PTCR Ceramics and Effects of Nb2O5 on Its PTCR Characteristics)

  • 정영훈;박용준;이미재;이영진;백종후;최진수;이우영
    • 한국재료학회지
    • /
    • 제18권9호
    • /
    • pp.475-481
    • /
    • 2008
  • Positive temperature coefficient of resistivity (PTCR) characteristics of (1-x)$BaTiO_3-x(Bi_{0.5}K_{0.5})TiO_3$ ceramics doped with $Nb_2O_5$ were investigated in order to develop the Pb-free PTC thermistor available at high temperatures of > $120^{\circ}C$. The PTCR characteristics appearing in the ($B_{i0.5}K_{i0.5})TiO_3$ (< 5 mol%) incorporated $BaTiO_3$ ceramics, which might be mainly due to $Bi^{+3}$ ions substituting for $Ba^{+2}$ sites. The 0.99$BaTiO_3-0.01(Bi_{0.5}K_{0.5})TiO_3$ ceramics showed good PTCR characteristics of a low resistivity at room temperature (${\rho}_r$) of $31{\Omega}{\cdot}cm$ a high ${\rho}_{max}/{\rho}_{min}$ ratio of $5.38{\times}10^3$, and a high resistivity temperature factor (${\alpha}$) of $17.8%/^{\circ}C$. The addition of $Nb_2O_5$ to 0.99$BaTiO_3-0.01(Bi_{0.5}K_{0.5})TiO_3$ ceramics further improved the PTCR characteristics. Especially, 0.025 mol% $Nb_2O_5$ doped 0.99$BaTiO_3-0.01(Bi_{0.5}K_{0.5})TiO_3$ ceramics exhibited a significantly increased ${\rho}_{max}/{\rho}_{min}$ ratio of $8.7{\times}10^3$ and a high ${\alpha}$ of $18.6%/^{\circ}C$, along with a high $T_c$ of $148^{\circ}C$ despite a slightly increased ${\rho}_r$ of $31{\Omega}{\cdot}cm$.

Fabrication of PZT Film by a Single-Step Spin Coating Process

  • Oh, Seung-Min;Kang, Min-Gyu;Do, Young-Ho;Kang, Chong-Yun;Nahm, Sahn;Yoon, Seok-Jin
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.193-193
    • /
    • 2011
  • To obtain ceramic films, the sol-gel coating technique has been broadly used with heat treatment, but crack formation tend to occur during heat treatment in thick sol-gel films. We prepared PZT thin films by sol-gel method with single-step spin coating process. The PZT solution have been synthesized using lead acetate ($Pb(CH_3COO)_2$), zirconium acetylacetonate ($Zr(OC_3H_7^n)_4$), and titanium diisopropoxide bis(acetylacetonate) 75wt% in isopropanol ($Ti(OC_3H_7^i)_2(OC_3H_7^n)_2$) as starting materials and n-propanol was selected as a solvent. The poly(vynilpyrrolidone) (PVP) was added with 0, 0.25, 0.5, 0.75, and 1 molar ratios to control viscosity of solution. We investigated influence of the viscosity on thickness, microstructure, and electrical properties of final PZT films. Thermo-gravimetric analysis and differential scanning calorimeter (TGA/DSC) was carried out from room temperature to $800^{\circ}C$ in order to measure pyrolysis temperature. Structural characteristics were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Ferroelectric and dielectric properties were measured by RT66A (Radiant) and impedance analyzer (Agilent), respectively. The thicknesses of PZT films depended on incorporation of an excess amount of PVP. Finally, we obtained PZT films of good quality without crack formation via single-step spin coating.

  • PDF

자연 정화작용 연구: I. 갯벌과 농지 상층수중 유 ${\cdot}$ 무기 원소의 거동에 관한 예비 연구 (Self-purification Mechanisms in Natural Environments of Korea: I. A Preliminary Study on the Behavior of Organic/Inorganic Elements in Tidal Flats and Rice Fields)

  • 최강원;조영길;최만식;이복자;현정호;강정원;정회수
    • 한국해양학회지:바다
    • /
    • 제5권3호
    • /
    • pp.195-207
    • /
    • 2000
  • 우리나라 갯벌과 농지내 유 ${\cdot}$ 무기 원소의 거동을 이해하기 위해 제한된 환경의 실험실 수조에서 예비실험을 수행하였다. 총 6개의 아크릴 투명 수조에 갯벌 퇴적물 3종 SW1&2(anoxic, silty mud), SW3&4(anoxic, mud), SW5&6(suboxic, mud)과 농지 토양 3종 FW1&2(벼 포기 포함), FW3&4(벼 포기 제외), FW5&6(간척 농지,펴 포기 제외)을 채운 후 오염물질(구리, 비소, 카드뮴, 크롬, 납, 수은, Glucose+Glutamic acid)이 주입된 해수와 담수를 각각 SW 및 FW수조에 넣고, 2주일에 걸쳐 상층수 및 표층 퇴적물/토양을 채취 ${\cdot}$ 분석하였다. 분석 결과 FW와 SW상층수 중 질산염 이온의 농도는 각각 700${\sim}$800 ${\mu}$M, 2${\sim}$5 ${\mu}$M로 FW에서 현저히 높았고, 인산염 이온의 농도는 각각 3${\sim}$4 ${\mu}$M, 1${\sim}$2 ${\mu}$M(SW1 제외)로 FW에서 약간 높았다. 특이하게 SW1에서 인산염 이온은 시간이 지남에 따라 수 십 ${\mu}$M에 이르는 높은 농도로 증가하였다. 한편, 표층 퇴적물/토양 중 박테리아 세포 수는 FW1&3에서 평균 2.5${\times}$10$^9$cells/g dry sediment으로 SW의 평균 3.0${\times}$10$^8$cells/g dry sediment 보다 약 10배가 높았다. FW5 토양 중 박테리아 세포 수(3.5${\times}$10$^8$cells/g dry sediment)는 SW 퇴적물 중 숫자와 유사하였다. SW 퇴적물 중 MUF-Phosphate 활성도는 100-200 nM/ml/hr이지만 FW5&6을 제외한 FW 토양에서는 약 2,000 nM/ml/hr로 현저히 크게 나타났다. ${\beta}$-D-Cellobiose, ${\alpha}$-D-Glucose, 그리고 ${\beta}$-D-Glucos의 활성도 또한 FW 퇴적물에서 큰 값을 보였다. 그러나 FW5&6 토양 중 효소활성도는 SW 퇴적물에서의 값과 유사했다. 수조 상층수 중 Cu, Cd, As 농도는 모든 FW, SW수조에서 시간이 지남에 따라 일관성 있게 감소하였고, 제거속도는 Cu가 다른 원소에 비해 빨랐다. 제거속도는 FW 3개 수조 중 FW5&6에서 세 원소 모두 가장 느렸고, SW 3개 수조 중에서는 SW1&2에서 가장 빨랐다. SW와 FW간 제거속도 차이는 세 원소 모두 명확치 않았다 Cr은 FW에서 전반적으로 감소하는 경향을 보였지만 SW에서는 실험 초기에 감소하다 24시간 이후에는 증가 후 일정한 양상을 보였다. Pb은 FW에서 전반적으로 감소했지만 SW에서는 초기에 급격히 증가 후 다시 급격히 감소하는 양상을 보였다 Pb 또한 Cu, Cd, As와 마찬가지로 SW1&2에서 제거속도가 가장 빠르게 나타났다. FW 상층수 중 Hg는 시간에 따라 급격히 감소했고, 제거속도는 Fw5&6에서 가장 느렸다. 이러한 결과에 근거할 때 벼가 자라고 있고 이분해성 유기물이 풍부한 FW1&2, FW3&4 토양과 상층수에서는 유기물의 분해 활동이 활발하였지만, 벼가 경작되지 않는 FW5&6과 SW 에서는 유기물이 상대적으로 결핍되어 유기물의 분해활동이 적었을 것으로 판단된다. 한편, 수조에 인위적으로 유기물을 첨가한 경우 박테리아 세포수는 SW1에서 164시간 동안 4배 증가하였으나 SW3과 SW5에서는 각각 2.7배, 1.5배 그리고 FW1&3&5의 경우 각각 약 2배, 1.7배, 0.6배 정도만 증가하였다. Cu, Cd, As등 친 유기성 원소들의 시간에 따른 농도 감소 그리고 이들 원소(Hg 포함) 농도 감소 속도가 유기물이 적은 FW5&6에서 상대적으로 느리게 나타난 결과 등은 이들 금속들이 부유 입자 표면의 유기물과 결합 ${\cdot}$ 침적되어 퇴적물로 제거되었기 때문에 나타난 결과로 생각된다. 한편, SW1&2에서 이들 원소의 제거 속도가 빨랐고 인산염 이온의 농도가크게 증가했던 원인은 SW3&4에 비해 상대적으로 공극이 큰 퇴적물로 채워진 SW1&2 퇴적물의 공극수 중 황화수소, 인산염 이온 등이 퇴적물 상층수로 쉽게 확산 ${\cdot}$ 공급되었고, 그 결과 Cu, Cd, As 등 금속 이온이 황화수소 이온과 결합 ${\cdot}$ 제거된 까닭으로 생각된다. 종합적으로 수조 상층수중 유 ${\cdot}$ 무기 원소의 거동은 주로 입자 표면의 유기물과 퇴적물/토양에서 공급된 황화물에 의해 조절된 것으로 생각된다.

  • PDF

경상분지내 삼산지역 열수동광상에 관한 지화학적 연구 (The Geochemistry of Copper-bearing Hydrothermal Vein Deposits in Goseong Mining District (Samsan Area), Gyeongsang Basin, Korea)

  • 최상훈;소칠섭;권순학;최광준
    • 자원환경지질
    • /
    • 제27권2호
    • /
    • pp.147-160
    • /
    • 1994
  • 경상분지 백악기 퇴적암류와 화산암류내 열극을 충진한 열수 맥상광체들로 구성된 삼산지역 동광상들은 구조운동에 수반되어 2회에 걸쳐 형성된 석영 및 방해석맥들로 구성된다. 변질대에 산출되는 견운모에 대한 K-Ar 연령은 약 82Ma로서, 지역주변에 암주상으로 산출되는 화강섬록암의 관입활동 등 후기 백악기 화성활동과 관련된 것임을 지시한다. 주 광화시기인 광화 I기 석영맥내에는 황철석, 유비철석, 황동석, 섬아연석, 방연석, 적철석 및 Pb-Bi-Ag-Sb계 유염광물등의 광석광물들이 녹렴석, 녹니석 등의 맥석광물들과 함께 산출되며, 광화 I기는 광물들의 산출조직과 공생관계 등에 의하여 3개의 substage (early, main, late)로 구분된다. 본역내 광상들에서의 주된 동광화작용은 약 12~3wt. % NaCl 상당 염농도를 갖는 광화유체로 부터 약 $330^{\circ}C$에서 약 $280^{\circ}C$ 에 걸쳐 진행되었으며, 초기 광화유체의 비등현상으로부터 ${\leq}100{\sim}200bar$의 광화작용시 압력이 확인된다. 주광화시기인 광화 I기중 광화유체의 ${\delta}^{34}S_{H_2S}$값이 초기 8‰에서 후기 2.3‰로 점차 감소함은 광화유체의 비등과 천수혼입에 수반되어 산소분압이 점진적으로 증가한 결과로 해석된다. 유체내 산소 및 수소 안정동위원소 연구결과, 이들 동위원소 값이 광화작용의 진행과 함께 점차 감소함은 상대적으로 낮은 water/rock 비값을 갖는 환경하에서 동위원소 교환반응을 이뤄 평행상태에 이른 광화초기 열수계내에 광화작용의 진행과 함께 산화상태의 차갑고 동위원소적 교환반응이 거의 이뤄지지 않은 천수의 혼입이 점증 하였음을 지시한다.

  • PDF

황토, 갯벌 및 머드의 중금속 흡착율에 관한 실험적 연구 (An Experimental Study on the Adsorption rates of Heavy Metals by Yellow Loess, Tidal Plat Sediment and Mud)

  • 이인숙;이미영;이택중;김현정;이병창;정명상;방은옥;송현실;황혜경;이중호;조영채
    • 환경위생공학
    • /
    • 제19권2호
    • /
    • pp.15-22
    • /
    • 2004
  • Yellow loess, Tidal plat sediment, and mud are blown to be high in adsorption though they have great distinction according to the ratio of clay minerals content and their kinds. Thus one of the samples for this study can be obtained by drying of Yellow loess, Tidal plat sediment, and the mud which is semifinished products that are from the progress of heat treatment and making homogeneity which can be found everywhere in our county. Another sample can be prepared by reducing pollutants with the adsorbent and by homing heavy metals of their on. With the samples, noxious heavy metals such as Pb, Cd, and essential trace elements such as Cu, Fe, Mn by each concentration is tested for adsorption according to pH, the kinds of adsorbents and the amount of injection. With the help of these steps, this study shows that the adsorbents, which are green, reducing the additional pollution and low in price, can be found. It also shows that the optimal condition for removing pollutants can be found and the basic materials for treating water can be offered. The results were as follows ; Yellow loess shows the rates of adsorption by more than 50% and Tidal plat sediment and Mud show it by more than 90%. Thus Tidal plat sediment and Mud are higher than Yellow loess the rates of adsorption. The pH should be treated in natural condition because the rates of adsorption of Pb, Cd, Cu, Mn excepting Fe in mud is higher in pH 7 than in pH 3 of Yellow loess, Tidal plat sediment, and Mud. The drying adsorbents are good to use because the rates of adsorption of heavy metals has tendency to be higher in the drying method than in the burning method. It is considered that the more the mont of the injection of the adsorbent is , the higher the rates of adsorption is, and one gram is reasonable for the amount of the injection of Tidal plat sediment and mud. Yellow loess is suitable for the treatment of the water that includes low concentration of heavy metals because it has the lower rate of adsorption as the concentration of noxious heavy metals is higher. It is thought that Tidal plat sediment and Mud is proper for the treatment of the water that includes high concentration of heavy metals because the rates of adsorption has not been changed as the concentration of heavy metals increases.

都市環境色彩改善方案에 관한 硏究 -아파트 表面色을 對象으로- (A Study on the Improvement Suggestions for Color in Urban Environment -with special regard to the surface color of apartment building in Seoul-)

  • 김대수;조정송
    • 한국조경학회지
    • /
    • 제18권3호통권39호
    • /
    • pp.115-135
    • /
    • 1990
  • The purpose of this study was to suggest an improvement proposal for colors in urban environment with special regard to the surface color and their situations of apartment buildings in Seoul. For this goal, 167 cases of different color types of apartment buildings were surveyed. And, the survey was performed in the view of color by areas, by localtion, by builder, by paint year, by built year, by appearance of building, and by surface texture to prove the influencing factors on the surface colors. These collected data analyzed and compared with the existing studies to find out the changing trend of colors. The results are as follows : 1) The use of neutral gray($26.4{\%}$) and warm color(YR, Y, GY; 56.4%) were dominant and the usage trend of higher 'value'(87.4%) and lower 'saturation'(73.0%) was obvious. Especially, the use of PB and P was noticeable. 2) In comparing the existing studies, the changing trend in the surface color pattern was found. That is, neutral gray was used dominantly in 1970's, warm color(YR, Y)in the middle of 1980's. In the end of 1980's, warm color were also used dominantly same as before and GY, PB, P were used noticeably with some rising tendency of higher 'value' and lower 'saturation' was obvious. 3) The results of analysis by localtion shows that the different color groups might exist in Seoul city. Neutral gray and YR were dominant in zone I. Warm colors(YR, Y, GY)were prevailed in zone II, III, IV. In zone V, many colors were evenly used. In zone VI, middle values at warm color were dominant. Progressively, these color groups with further study could be considered in the color management in urban environment possibly. 4) Surface color of apartment buildings were different from their builders. 5) Concerned with the painted year, the use of higher 'value' and lower 'saturation' was increased gradually with the change of times. 6) the analysis by the built year revealed that the 'value' of surface colors on the old buildings was lower than that of the new ones. 7) The 'value' of colors on the surface with texture was higher than that of the surface without texture. 8) In the combination of two colors, the use of 'value' with difference at the same 'hue' was found harmonions in many cases, but the 'saturation' in usage was included in the ambiguity (Moon & Spencer's term). The ambiguity in color harmony should be improved in the near future.

  • PDF

고색재현성 디스플레이 응용을 위한 고안정성 양자점 함유 유리색변환소재

  • 정운진;이한솔;이진주
    • 인포메이션 디스플레이
    • /
    • 제23권4호
    • /
    • pp.12-21
    • /
    • 2022
  • 반도체 기반 양자점 (QD)소재와 CsPbX3 (X=Cl, Br, I)기반 perovskite 양자점 또는 나노결정 소재(PNC)는 매우 우수한 양자효율과 좁은 발광 선폭으로 고색재현성 디스플레이 색변환 소재 또는 발광 소재로서 각광을 받고 있다. 그러나, 기존 화학적 합성법을 통해 제조되는 QD 및 PNC 소재는 취약한 열 및 화학적 안정성으로 인해 장기 내구성의 개선이 요구된다. 이들 QD 및 PNC 소재는 모두 완전 무기 소재인 산화물 기반 유리 소재내에 생성이 가능하며, 이를 통해 장기 내구성을 근본적으로 개선할 수 있다. 반도체 기반 QD 함유 유리소재 (QDEG)의 경우, 유리 내 core/shell 구조를 가진 QD의 생성으로 양자효율의 향상이 가능했으나, 콜로이드 기반 양자점 (cQD)과 달리 다중 shell의 형성이 어려워 양자효율이 제한되고, 발광 선폭이 넓어 고색재현성 디스플레이용 색변환 소재로 적용되기에는 아직 한계가 있다. 한편, Perovskite 양자점 (또는 나노결정) 함유 유리소재 (PNEG) 소재는 QDEG과 달리 콜로이드 기반의 PNC (c-PNC)가 가지는 우수한 양자효율과 20 nm 수준의 좁은 선폭을 유리 내에서도 가지며, c-PNC 대비 열적, 화학적 및 광학적 안정성이 획기적으로 향상되어 실질적인 응용 가능성을 높이고 있다. 특히, 일반적인 용융-급랭법으로 제조하여 대량생산에 용이하고, 분말 또는 판상 등 다양한 형태로의 제작이 가능한 장점이 있다. 현재까지 제조된 PNEG의 최대 PL-QY는 450 nm 여기 시 녹색 및 적색에서 약 60% 수준이며, Al2O3 분말을 이용할 경우 최대 80% 수준까지 달성이 가능하다. 또한, PNEG과 blue LED를 이용하여 백색 LED를 구현할 경우 color filter를 적용하지 않을 때, NTSC 대비 최대 약 130 % 수준의 높은 색재현 영역을 보여 주고 있으며, 실제 LCD용 BLU로 적용 시 기존 상용 c-QD 소재와 동등 이상의 색재현 영역을 보이고 있어, 실질적인 응용 가능성이 매우 높음을 확인하였다. PNEG의 상업적인 응용을 위해서는 몇 가지 추가적인 연구 개발이 필요하다. 기존 c-QD 또는 c-PNC는 나노 수준 크기의 입자가 액상에 분산된 형태로 입도 제어가 용이하나, PNEG의 경우 분말 제조 시 유리 형성 후 분쇄를 통해 제조되며, 입도가 대개 수십 ㎛ 이하로 작아질 경우 PL-QY가 저하되어, 향후 잉크젯 공정 응용을 위해서는 고효율의 분말 제조공정 개발이 필요하다. 또한, 유리 소재의 경우 절연체로서 기존 QD 소재 대비 electro-luminescence(EL) 소자의 활성층으로 사용하는데 제약이 있어 PNEG을 이용한 EL 소자 제작에 대한 연구도 필요하다. 마지막으로, 기존 c-PNC 소재와 같이 Pb가 함유되지 않은 PNEG 소재의 개발이 선결되어야 할 것으로 판단된다. 이와 같은 해결 과제들에도 불구하고, PNEG 소재는 기존 c-QD 소재 대비 매우 우수한 안정성을 기반으로 고품위 고색재현 디스플레이용 색변환 소재로서 다양한 응용에 활용될 수 있을 것으로 기대된다.

Electron Microscopic Grid를 이용한 초급속동결이 소 난포란의 발달능에 미치는 영향 - I. 소 미성숙난자의 동결에 관한 연구 (Developmental Capacity of Bovine Follicular Oocytes after Ultra-Rapid Freezing by Electron Microscope Grid - I. Cryopreservation of Bovine Immature Oocytes)

  • 김은영;김남형;이봉경;윤산현;박세필;정길생;임진호
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제25권1호
    • /
    • pp.71-76
    • /
    • 1998
  • 본 연구는 소 미성숙난자를 electron microscope (EM) grid와 동해제인 EFS30을 이용하여 초급속 동결하였을 때 정상적인 배 발달의 유도가능성 여부를 조사하고자 실시하였다. 동해제는 30% ethylene glycol, 18% ficoll, 0.5 M sucrose와 10% FBS 등이 PBS에 첨가되어 제작된 EFS30을 사용하였다. 난자 생존의 평가기준으로는 성숙, 수정 및 배발달을 조사하였다. 본 연구에서 얻어진 결과는 다음과 같다. 초급속동결-융해 후, 소 미성숙란의 생존율은 43.2%을 나타내었다. 동결-융해군의 체외 성숙 (84.1%)과 정상 자웅전핵 형성율 (57.5%)은 대조군의 결과 (92.5, 65.0%)와 비교하여 볼 때 유의한 차이는 없었다. 또한, 동결군의 체외수정 이후의 $\geq2$-세포기 형성 (65.0%)과 배반포형성율 (30.8%)도 대조군(73.7, 35.7%)의 결과와 유의한 차이를 나타내지 않았다. 따라서 소 미성숙난자는 EM grid와 EFS30 동결액을 이용한 초급속 동결방법에 의해 정상적인 배발달이 유도될 수 있다는 것을 알 수 있었다.

  • PDF