• Journal of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.315-322
• /
• 1984

The dependence of polarographic parameters on the pressure for the reduction of In(III), Cr(III), Cd(II), Pb(II), Mn(II), Co(II), Tl(I) in 0.1M KCl aqueous solution at the dropping mercury electrode have been discussed. In this experiment the temperature varied from $25^{\circ}C\;to\;35^{\circ}C$ and the pressure ranges from 1 atmosphere to 1,800 atmospheres. By increasing the pressure the reduction half-wave potentials of all metal ions are shifted markedly to more negative values and the diffusion currents of all metal ions become considerably larger. The slope of the linear relationship of E vs. log[$\frac{id-i)}{i}$] become much larger with increase in pressure, which indicates more irreversible reduction. The temperature coefficient observed over the range of the temperature from $25^{\circ}C\;to\;35^{\circ}C$ are not sensitive with increase in pressure.

• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.555-566
• /
• 1987

Fifty ancient Korean coins originated in Yi Dynasty have been determined for 9 elements such as Sn, Fe, As, Ag, Co, Sb, Ir, Ru and Ni by instrumental neutron activation analysis and for 3 elements such as Cu, Pb, and Zn by atomic absorption spectrometry. Bronze coins originated in early days of the dynasty contain as major constituents Cu, Pb and Sn approximately in the ratio 90 : 4 : 3, whereas, those in latter days contain in ratio 7 : 2 : 0. Brass coins which had begun in 17 century contain as major constituents Cu, Zn and Pb approximately in the ratio 7 : 1 : 1. The multivariate data have been analyzed for the relation among elemental contents through the variance-covariance matrix. The data have been further analyzed by a principal component mapping method. As the results training set of 8 class have been chosen, based on the spread of sample points in an eigen vector plot and archaeological data such as age and the office of minting. The training set and test set of samples have finally been analyzed for the assignment to certain classes or outliers through the statistical isolinear multiple component analysis (SIMCA).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.72-72
• /
• 2009

본 연구에서는 Photoconductor materials 기반의 평판형 X-ray Detector film 제작에 관한 연구를 수행하였다. 기존의 광도전성 물질로 사용되어 오던 비정질 셀레늄(Amorphous seleinum; a-Se) 기반의 디지털 방사선 검출기 보다 높은 신호 및 동작 특성을 가지는 Mercury Iodide(HgI2)와 열적, 전기적 특성이 안정적이며, 소자의 동작특성이 우수한 Lead Oxide(PbO) 기반의 X-ray Detector film의 개발에 있어서 각각 HgI2 및 PbO 두 물질 층을 적정비율에 맞추어 제작함으로써 최적의 X-ray Detector를 구현하고자 하였다. 이는 빠른 영상획득을 통해 기존의 방식이 가지는 문제점을 해결하고 의료기기 디지털화를 구현할 수 있는 차세대 시스템을 개발하고자 하는 것이다. 본 연구에서는 기존의 진공증착법의 두꺼운 대면적 필름의 제조가 어려운 문제점을 해결하고자 Particle In Binder method(PIB) 방법을 이용하여 $3"{\times}3"$사이즈의 두께 $200{\mu}m$의 다결정의 Photoconductor 필름을 제조하여 전기적 특성을 평가하였다. 제작된 필름의 전기적 특성을 dark current, X-선 sensitivity와 SNR(Signal to -Noise Rate) 등을 측정하여 정량적으로 평가 하였다. 기준 실험으로 진행한 DG 2.1 바인더를 사용한 single-HgI2 층에서 보다 높은 sensitivity 값을 보였지만 높은 dark current로 인해 SNR이 떨어지는 결과를 볼 수 있었다. 본 연구에서 제시하는 두 Photoconductor material의 Soaking method를 이용한 실험에서는 single-HgI2에 해당하는 높은 sensitivity 및 저감된 dark current로 인해 높은 SNR 값을 획득하였다. 하지만 습도와 같은 주변 환경에 의한 재현성 문제로 인한 신호값의 불안정성에 대한 문제점도 남아 있으므로, 차후 최적화된 material 제작 공정을 위한 연구가 꾸준히 진행 되어져야 할 것이다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.522-531
• /
• 2003

Samples with the nominal composition, B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+{\delta}}$ high- $T_{c}$ superconductors containing MgO as an additive were fabricated by a solid-state reaction method. Samples with MgO of 5~30 wt% each were sintered at 820~86$0^{\circ}C$ for 24 hours. The structural characteristics, critical temperature, grain size and image of mapping with respect to MgO contents were analyzed by XRD(X-Ray Diffraction), SEM(Scanning Electron Microscope) and EDS(Energy dispersive X-ray spectrometer) respectively. As MgO contents increased, intensity of MgO Peaks and ratio of Bi-2212 phase in superconductors intensified and the proportion of the phase transition from Bi-2223 to Bi-2212 was increased.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.107-117
• /
• 2007

Dispersion characteristics and envirounmental impactes of the stream sediments were investigated and geochemical disaster in the Namhae-Hwagye area was predicted. Stream sediments having no possibility of contamination effect and representing drainage basins were collected. Major and hazardous elements concentrations were determined by XRF, ICP-AES and NAA analysis methods. Acid decomposition for the ICP-AES have been used $HClO_4$ and HF with $200^{\circ}C$ heating at 1'st and after that $HClO_4$, HF and HCl with $200^{\circ}C$ heating at 2'nd stage. Hazardous elements concentrations for the stream sediments in the Namhae area were Cu $5.66{\sim}168\;ppm$, Pb $18.0{\sim}40.7\;ppm$, Cr $21.6{\sim}147\;ppm$, Co $4.86{\sim}25.3\;ppm$. Hazardous elements concentrations for the stream sediments in the Hwagye area were Cu $16.4{\sim}41.2\;ppm$, Pb $26.5{\sim}37.5\;ppm$ Cr $79.6{\sim}153\;ppm$, Co $15.7{\sim}29.5\;ppm$. Concentration of Cu and Co in the stream sediments show a negative correlation with $SiO_2$ in all study area. According to E.I.(Enrichment Index) of stream sediments was not enriched in study area. And average E.I. was 0.35 (Namhae) and 0.56 (Hwagye) respectively. The stream sediments were enriched as in order of Pb > Cr > Co > Cu. And the average of Enrichment Factor (E.F.) was 0.46 to 2.84, respectively. E.F. concentration of Cu and Co were nearly similar enrichment characteristic but E.F. concentration of Cr were higher enrichnent characteristic in Namhae than Hwagye area. Pb was highly enriched in all study area but the tolerable level that used to investigate the enrichment degree of hazardous elements, was not exposed to harmful hazardous elements.

• Electrical & Electronic Materials
• /
• v.7 no.4
• /
• pp.281-288
• /
• 1994

According to spread volume of B(BiPbCuO) layer, composition ratio and each stage of sintering process, we studied stability of high Tc superconductor phase and generation and growth movement of superconducting phase. The dual layer composed of SrCaCuO and BiPbCuO compound were prepared to develop the Bi-2223 superconductor[108K] through interaction and diffusion during sintering process. The dual layer samples were sintered at 830.deg. C for 0-210 hours. From the result, the optimum conditions were : spread volume(A:B=1:0.6), sintering time(210h) and composition ratio(A:S $r_{2}$C $a_{2}$C $u_{2}$- $O_{x}$, B:B $i_{1.9}$P $b_{0.5}$C $u_{3}$ $O_{y}$) at 830.deg. C.. C.C.C.

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.15-20
• /
• 2004

Two pieces of choson-Tongue(朝鮮通寶) minted at 1423 A.D. were analyzed by atomic absorption spectroscopy and neutron activation analysis. The measurement of lead isotope ratios was also carried out in order to predict the provenance of raw materials used for minting. The Chosen-Tongue was minted as bronze having the chemical compositions of $Cu\;90\%,\;Pb\;3\~4\%,\;Sn\;2\~3\%$, which were different from the typical composition of Chinese and Japanese coins. The results of lead isotope ratios showed that the provenance of raw materials used for minting had a possibility to be originated from South China. And application of statistical linear discriminant analysis (SLDA) to the provenance of lead used for minting of Chosen-Tongue was confirmed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.192-193
• /
• 2006

The wet coating process could easily be made from large area film with printing paste mixed with semiconductor and binder material at room temperature. Semiconductor film fabricated about 25mm thickness was evaluated by field emissions-canning electron microscopy (FE-SEM). X-ray performance data such as dark current, sensitivity and signal to noise ratio (SNR) were evaluated. The $Hgl_2$ semiconductor was shown in much lower dark current than the others, but the best sensitivity. In this paper, reactivity and combination character of semiconductor and binder material that affect electrical and X-ray detection properties would prove out though experimental results.

• Journal of Environmental Health Sciences
• /
• v.20 no.1
• /
• pp.83-95
• /
• 1994

This study was performed to investigate the preventive effect of KDD against lead toxicity. KDD of 133, 266, 532 and 1,064 mg/kg were administered twice to the rats of Sprague-Dawley strain and then 300 mg/kg lead acetate was given to times, respectively. 1. The $\delta$-ALAD concentration in the urine showed 10.6 ~16.4 mg/kg in the control group indicated statistical significance for the experimental group II, III, IV, V (p<0.05). Also, the Coproporphyrin concentration had 0.119 ~ 0.226 $\mu$g/ml in the control group indicated statiscial significance for the experimental group V of 10 weeks (p<0.05). 2. The $\delta$-ALAD concentration in the blood showed 13.28 ~ 16.08 ALAD unit in the control group indicated statistical significance for the experimental group I (Pb 300 mg/kg) of 6 and 8 weeks, for the experimental group III, IV of 8 and 10 weeks, and for the experimental group V of 4 weeks (p<0.05). The $\delta$-ALAD concentration of experimental group I (Pb 300 mg/kg) group was inclined to decrease during the experiment period. The $\delta$-ALAD concentration of experimental group I (Pb 300 mg/kg) showed statistical significance for the experimental group II, III, IV, V of 6, 8 and 10 weeks. But, there was no statistical significance in the concentration change of hemoglobin, RBC, WBC, hematocrit, Ca, protein among the experimental groups. In conclusion, this study revealed the preventive effect of KDD against lead toxicity and its mechnism inferred to facilitate lead excretion in urinary following hinderance of lead absorption in the gastric-intestine and organs.

• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.291-295
• /
• 2000

The pyroelectric property of $Pb_{0.9}La$_{0.1}TiO_3$ceramics in a range of 1.3-4.1$\mu\textrm{m}$, fabricated by conventional solid sintering, was investigated as a function of poling field. The pyroelectric of the 4.1$\mu\textrm{m}$ of $Pb_{0.9}La$_{0.1}TiO_3$ceramics is higher than that of the 1.3$\mu\textrm{m}$ and 1.7$\mu\textrm{m}$ of $Pb_{0.9}La$_{0.1}TiO_3$ceramics at a low poling field and the pyroelectric coefficient is 25nC/$\textrm{cm}^2$K at a 4kV/mm poling field in every grain size. In order to explain this phenomenon, the intrinsic and extrinsic effects in view of the definition of the pyroelectric coefficient are introduced. The intrinsic and extrinsic effects on the pyroelectric property were investigated by measuring the tetragonal ratio and the $I_{002}$ with temperature with high temperature X-ray diffractometer. The change of spontaneous polarization and the $90^{\circ}$domain wall motion with temperature in the 1.3$\mu\textrm{m}$ and 4.2$\mu\textrm{m}$ of $Pb_{0.9}La$_{0.1}TiO_3$ceramics have no effects on the pyroelectric coefficient. In our study, it can be seen that the pyroelectric coefficient is related to the quantity of $180^{\circ}$domain switching after poling treatment.