• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1283-1293
• /
• 1998

A solid state chemical approach to discover new mateials with enhanced thermoelectric properties is described. The aim is to construct three-dimensional bismuth chalcogenide framework structures which contain tonically interacting alkali or alkaline earth atoms. The alkali atoms tend to have soft "rattling" type phonon modes which result in very low thermal conductivity in these materials. Another desirable feature in this class of compounds is the low crystal symmetry and narrow band-gaps. Several promising materials such as BaBiTe3, KBi6.33S10, K2Bi8S13, β-K2Bi8Se13, K2.5Bi8.5Se14, Ba4Bi6Se13, Eu2Pb2Bi6Se13, Al1+xPb4-2xSb7+xSe15 (A=K, Rb), and CsBi4Te6 are described.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1992년도 추계학술발표강연 및 논문개요집
• /
• pp.107-108
• /
• 1992

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.28.2-28.2
• /
• 2000

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.166.1-166
• /
• 2002

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 춘계학술발표회
• /
• pp.63-63
• /
• 1997

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.522-531
• /
• 2003

Samples with the nominal composition, B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+{\delta}}$ high- $T_{c}$ superconductors containing MgO as an additive were fabricated by a solid-state reaction method. Samples with MgO of 5~30 wt% each were sintered at 820~86$0^{\circ}C$ for 24 hours. The structural characteristics, critical temperature, grain size and image of mapping with respect to MgO contents were analyzed by XRD(X-Ray Diffraction), SEM(Scanning Electron Microscope) and EDS(Energy dispersive X-ray spectrometer) respectively. As MgO contents increased, intensity of MgO Peaks and ratio of Bi-2212 phase in superconductors intensified and the proportion of the phase transition from Bi-2223 to Bi-2212 was increased.

• 한국세라믹학회지
• /
• 제34권2호
• /
• pp.123-130
• /
• 1997

본 연구에서는 유전상수가 크고, 유전체 손실이 적으며, 사용온도 범위에서 정전용량 변화율(TCC : tem-perature coefficient of capacitance)이 작고, 고압에 견딜 수 있는 재료를 개발하기 위하여 중고압용 capacitance의 기본재료로써 (Sr.Pb.Ca)TiO3-xBi2O3.3TiO2 계에서 Bi2O3.3TiO2의 mol.%를 5, 6, 7, 8, 9 mol.%로 변화시켰으며, 그 결과 고용한계 함량이 6mol.%이며, 6mol.%이상에서는 침상구조의 증가에 기인하여 유전율이 다시 감소하는 경향을 보였다. dopant로써 SiO2, Nb2O3, MnO2를 선정하여 첨가한 결과, MnO2를 첨가한 것이 유전성질이 가장 우수하였으며, MnO2의 함량이 0, 0.15, 0.3, 0.45 wt.% 증가함에 따라서 유전율의 감소와 동시에, TOC특성의 급격한 향상을 가져왔다.

• Journal of Welding and Joining
• /
• 제23권3호
• /
• pp.61-67
• /
• 2005

Since lead (Pb)-free solders for electronics have higher melting points than that of eutectic Sn-Pb solder, they need higher soldering temperatures. In order to decrease the soldering temperature we tried to coat Sn-Bi layer on $Sn-3.5\%Ag$ solder by electroplating, which applies the mechanism of transient liquid phase bonding to soldering. During heating Bi will diffuse into the $Sn-3.5\%Ag$ solder and this results in decreasing soldering temperature. As bonding samples, the 1608 capacitor electroplated with Sn, and PCB, its surface was finished with electroless-plated Ni/Au, were selected. The $Sn-95.7\%Bi$ coated Sn-3.5Ag was supplied as a solder between the capacitor and PCB land. The samples were reflowed at $220^{\circ}C$, which was lower than that of normal reflow temperature, $240\~250^{\circ}C$, for the Pb-free. As experimental result, the joint of $Sn-95.7\%Bi$ coated Sn-3.5Ag showed high shear strength. In the as-reflowed state, the shear strength of the coated solder showed 58.8N, whereas those of commercial ones were 37.2N (Sn-37Pb), 31.4N (Sn-3Ag-0.5Cu), and 40.2N (Sn-8Zn-3Bi). After thermal shock of 1000 cycles between $-40^{\circ}C$ and $+125^{\circ}C$, shear strength of the coated solder showed 56.8N, whereas the previous commercial solders were in the range of 32.3N and 45.1N. As the microstructures, in the solder $Ag_3Sn$ intermetallic compound (IMC), and along the bonded interface $Ni_3Sn_4$ IMC were observed.

• 한국재료학회지
• /
• 제8권7호
• /
• pp.641-647
• /
• 1998

원심 분무법으로 제조된 P/M 2011 AI 합금 압출재의 절삭성을 조사하였다. 압출재 내에 분포된 Pb-Bi 입자들은 매우 균일하고 미세하게 분포된다. 절삭속도가 증가할수록 미세한 칩이 생성되며 이송량이 0.1mm/rev 이하에서부터는 연속칩이 생성된다. 표면의 상태는 이송량에 크게 의존하며 절삭깊이와 절삭속도에는 크게 의존하지 않는다. 불연속칩은 분산된 $AI_2O_3$입자와 공정 Pb-Bi 개재물의 존재로 인해서 생성된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.213-215
• /
• 1993

Silver-sheathed Bi-Pb-Sr-Ca-Cu-O wires by the powder-in-tube method were preparated to study on the superconducting properties with cooling conditions. Superconducting wires were cooled down in the furnace, air and liquid $N_2$ after sintering at $840^{\circ}C$. Critical current density of sample cooled in the furnace is $5.1{\times}10^3\;A/cm^2$ at 77K, zero magnetic field and Jc of sample cooled in the air is very low. 2223 high-Tc superconducting phase of sample cooled in the air was distroyed. Therefore, we knew that superconducting wire need to cool slowly to get the high critical current density.