• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.294-302
• /
• 1998

$Pb_{1+x}$($Fe_{0.5}$$Nb_{0.5}$)$O_3$ films have been synthesized on Pt/Ti/$SiO_2$/Si substrates using rfmagnetron sputtering Concentration of Fe and Nb in the deposited films was adjusted to near stoichiometry through the control of target composition, Films deposited with adjusted to near stoichiometry showed better electrical properties such as dielectic and leakage characteristics. Crystallinity and dielectric constant increased with increasing excess PbO upto 9 mol% This study also showed that dielectric constant and leakage current characteristics improved by optimum content of $O_2$ flow during deposition.

• The Korean Journal of Ceramics
• /
• v.6 no.4
• /
• pp.385-389
• /
• 2000

Residual stresses in epitaxial films were measured by X-ray diffraction method. Lattice strains of the (hkl) planes measured along particular Ψ-angles were converted to the in-plane stress according to the equation of stress-strain tensor conversion. Residual tensile stresses were observed in epitaxial PbTiO$_3$ films deposited on (100) SrTiO$_3$ substrate. Tensile stresses approximately 0.9 GPa were measured in Pb-rich films, while it increased to approximately 2.0 GPa with the decreasing of Pb content in the case of Pb-poor films, which ascribed to the formation of lead and oxygen vacancies (expressed as x in Pb$_1-x$TiO$_3-x$).

• Journal of Surface Science and Engineering
• /
• v.22 no.4
• /
• pp.197-206
• /
• 1989

The Composition and throwing power-of Pb-Sn alloy deposits are investigated in tems of the pulse parameters in pulse plating. Microhardness and intermal srress of alloy deposots are measured. The current efficiency of pulse plating is lower than that of D.C.plating while cathode overpotential and macro-throwing power noticebly increase with increasing peak current density. The Pb content of P.C. plated alloy deposits with increasing average current density, is relatively lower than of D.C. plated deposits at the same average current density. The internal stress of Pb-Sn alloy is not detected and the microhardness are 9.0kg/mm2 and 11kg/mm2 for D.C. plated P.C. plated deposits, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.1
• /
• pp.3-10
• /
• 2016

Effects of acid ($HNO_3$ and HCl) modification on the adsorption properties of Pb(II) and Cu(II) onto bamboo-based activated carbon (BAC) were investigated through a series of batch experiments. The carbon content increased and oxygen content decreased with acid treatment. $HNO_3$ induced carboxylic acids and hydroxyl functional groups while HCl added no functional group onto BAC. The pseudo-second order model better described the kinetics of Pb(II) and Cu(II) adsorption onto experimented adsorbents, indicating that the rate-limiting step of the heavy metal sorption is chemical sorption involving valency forces through sharing or exchange of electrons between the adsorbate and the adsorbent. The equilibrium sorption data followed both Langmuir and Freundlich isotherm models. The adsorption capacities of BAC were affected by the surface functional groups added by acid modification. The adsorption capacities were enhanced up to 36.0% and 27.3% for Pb(II) and Cu(II), respectively by the $HNO_3$ modification, however, negligibly affected by HCl.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.3
• /
• pp.207-217
• /
• 1995

Extracting efficiencies of seven extracting solutions currently employed in extracting heavy metals from soils were compared and the functional relationships among them were calculated by regression analysis for Cd, Zn, Cu, and Pb. Extracting solutions employed were 0.1M HCl, 0.1M $HNO_3$, 0.05M EDTA, 0.001M DTPA(pH 7.3), 1M $NH_4OAc$ (pH 7.0), 0.1M $NH_4Ox$, and 4M $HNO_3$ respectively. Soil samples were collected from rice paddy fields near old zinc mining sites and from rice paddy fields near agro-industry complexes. Soils sampled from old zinc mining sites were also extracted using a sequential extraction method. Extraction by 4M $HNO_3$ and sequential extraction were performed on the samples collected both in 1979 and in 1991 to investigate the change in content and in chemical form of heavy metals. Functional relationships among the extracting solutions were highly correlated for Cd and Zn, whereas those for Cu and Pb were not. The predominant chemical form of Cd. Zn, Cu, and Pb in soils from old zinc mining sites was found to be of sulfide/residue form. The exchangeable form of Cd, the organically bound form of Cu, and the carbonate form of Pb were relatively high, while the sulfide/residue form of Zn was very high(> 79%). Although transformation among the extracted forms was not clear during those 12 years, a decrease in total content of Cd, Zn, Cu, and Pb was clearly observed.

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.1011-1019
• /
• 1998

This work designed Sn-5%Pb-1.5%Ag-x%In solder alloy to develop the solder alloy with low Pb content. This solder alloy doesn't cause environmental pollution. and this study reviewed the probability of replacement of Sn-37%Pb solder as evaluation of melting range, wettability. microstructure, microhardne'ss, tensile strength, drossability of this new solder alloys. The level of international regulation in dissolution amount of Pb ion was 3ppm. But dissolution amount of Pb ion in Sn-5%Pb solder alloy confirmed not to threat the global environmental is 0.46ppm. The melting range of this solder alloy was $183-192^{\circ}C$. Also the range of solidification was very narrow within $5^{\circ}C$. The wettability was similar to Sn-37%Pb solder, and the effect of amount of In addition of wettability couldn't be founded. The probability of replacement in the melting range and wettability is very high. And microhardness of this solder alloy was 1.5 times of conventional type solder. Tensile strength of new solder alloys was a little high than that of conventional type solder. With increasing amount of In% addition, tensile strength was increased, but elongation was decreased. The solder alloy of l%In addition revealed AgSn and Pb on dendrite microstructure boundary, and $Ag_3Sn$, $Ag_3In$ and Pb were revealed on it at the solder alloy of 3% In addition. The drossability was superior to Sn-37%Pb solder alloy and the solder alloys of 2% In addition was not generated for 3hrs.

• Analytical Science and Technology
• /
• v.10 no.2
• /
• pp.105-113
• /
• 1997

We investigated the content of heavy metals contained in the soil at an Il-Kwang disused mine in Kyung Nam. Three sampling points were selected, each point was digged to 210 or 240cm, sampled each 30cm depth. After air drying, each sample was digested in aqua regia and then analyzed with an Inductively Coupled Plasma Atomic Emission Spectrometer. We determined the content of Zn, Pb, Cr, Cd, Cu, Mn, and Fe, maximum content of Pb, Cd, and Zn was observed to $(4.6{\pm}0.1){\times}10^3$, 9.4(${\pm}3.6$), and $(2.7{\pm}0.1){\times}10^2{\mu}g/g$ respectively. Mean pH values of soil sampled at No.1, 2, and 3 regions were 3.2, 2.6, and 2.8, respectively. These values are remarkably lower than pH of the conventional standard soil which usually shows pH level around 4.9. At each sampling point, maximum content of heavy metals was observed from 30cm to 60cm depth. The depth profiles of Zn, Cd, Pb, and Cr showed very similar tendencies to each other, but those of Fe, Cu. and Mn showed different tendencies to former ones.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.1
• /
• pp.15-21
• /
• 2004

Objectives of this study were to monitor the distribution of heavy metals, to compare extractable heavy metal with total content and to investigate the relationships between soil physico-chemical properties and heavy metals in orchard soil. Sampling sites were 48 in Gyeonggi, 36 in Gangwon, 36 in Chungbuk, and 44 in Chungnam, Soils were collected farm form two depths, 0 to 20 and 20 to 40 cm (here after referred to as upper and lower layers) from March to May in 1998. Total contents of heavy metal in soils were analyzed by ICP-OES after acid digestion ($HNO_3$:HCl:$H_2O_2$) whereas extractable contents were measured after successive extraction of 0.1N-HCl, 0.05 M-EDTA, and 0.005 M-DTPA. Mercury was analysed by mercury atomizer. The average contents of Cd Cu, and Pb in the extractant with 0.1N-HCl at upper layer were 0.080, 4.23, and 3.42 mg/kg, respectively. As content in the extractant with 1N-HCl was 0.44 mg/kg, and total contents of Zn, Ni and Hg were 78.9, 16.1, and 0.052 mg/kg, respectively. The ratios of concentrations of heavy metals to threshold values (Cd 1.5, Cu 50, Pb 100, Zn 300, Ni 40, Hg 4 mg/ke in Soil Environmental Conservation Act in Korea (2001) were low in the range of $1/2.5{\sim}1/76.9$ in orchard soils. The ratios of extractable heavy metal to total content ranged $5.4{\sim}9.21%$ for Cd, $27.9{\sim}47.8%$ for Cu, $12.6{\sim}21.8$% for Pb, $15.8{\sim}20.3%$ for Zn, $5.3{\sim}6.3%$ for Ni, and $0.7{\sim}3.6%$ for Zn, respectively. Cu and Pb contents in 0.05 M-EDTA extractable solution were higher than those in the other extractable solution. Total contents of Cd, Ni and Ni in soils were negatively correlated with sand content but positively correlated with silt and clay contents. Ratios of extractable heavy metal to total content were negatively correlated with clay content but ai and Ni contents were positively correlated with soil pH, organic matter, and available phosphorous. Therefore, the orchard soil was safe because the heavy metal contents of orchard soil were very low as compared to its threshold value in the Soil Environmental Conservation Act. However, it need to consider the input of agricultural materials to the agricultural land for farming practices for assessment of heavy metals.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.2
• /
• pp.130-134
• /
• 1995

To investigate the influence of coal fly ash treatment on the heavy metal content in the infilteration water, 12t/10a/year of fly ash(Anthracite and Bituminous) were applicated at two paddy fields of different textured soils, clay loam and sandy loam, for 3 and 2 years, respectively. The infilteration waters were collected 30, 60 and 100cm of soil depth and the heavy metal contents were measured. In the paddy field of clay loam, the content of Zn in the infilteration water were increased with fly ash treatment and increasing soil depth, but it didn't show any significance. In the clay loam soil, successive application of fly ash for 3 years brought to increase Pb, Zn content in the infilteration water, Pb content was the highest at 100cm of soil depth, but the content of others were lower than non-treatment. In the paddy field of sandy loam, successive application of fly ash for 2 years increased Cd, Ni and Mn content in the infilteration water at anthracite ash application, but the contents of other elements were similar or lower than non-treatment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.4
• /
• pp.389-397
• /
• 1989

This study was designed to investigate the effects of dietary protein level on Pb, Fe, and Cu accumulation of the tissue of the Pb-administered rats. The dietary protein levels were 6% 15%, and 40% and the lead-exposed rats were given 2,000 ppm-Pb drinking water solution. After 3 weeks, half of the each group rats were sacrificed and the rest were sacrificed 4 weeks later. Hematocrit, hemoglobin, R8C content in blood were lower in Pb-administered groups than in Pb-free group. Protein levels of serum and liver in 6% casein Pb-administered group were lower than in control group. Pb contents of serum, liver, and kidney were significantly increased in 6% casein-Pb administered group. Fe contents of serum and kidney were increased in 40% casein Pb-administered group, whereas in liver, 6% casein Pb-administered group was higher than others.