• 제목/요약/키워드: Paving Material

검색결과 52건 처리시간 0.024초

택지개발에 따른 표면재료를 고려한 우수유출저감시설의 침투 특성에 관한 실험 연구 (An Experimental Study on Infiltration Characteristics of Facilities for Reducing Runoff Considering Surface Materials According to Housing Lot Developments)

  • 임장혁;송재우;박성식;박호상
    • 한국지반환경공학회 논문집
    • /
    • 제8권5호
    • /
    • pp.47-55
    • /
    • 2007
  • 택지개발에 따른 불투수 면적의 증가는 호우 발생시 하천으로의 유출량과 첨두유량의 증가뿐만 아니라 첨두유출량의 발생시간도 감소하는 등 방재 측면에서도 불리한 여건이 심화되고 있다. 침투시설에 의한 우수유출 저감의 경우, 공법, 재료, 투수성능과 현장 여건에 따라 좌우되기 때문에 침투특성이나 정량적인 분석에 대한 연구는 아직까지 미흡한 실정이다. 본 연구의 목적은 표면재료에 따른 침투형 우수유출 저감시설의 침투 특성을 연구하는 것이며, 이를 실험을 통해 표면재료 및 강우강도를 변화시키며 실험장치에 의한 침투특성을 고찰하고, 표면재료의 이용에 따른 침투효과 및 특성을 분석하여 우수유출 저감시설의 기초연구자료로 활용할 수 있도록 하는데 그 의의가 있다. 본 연구에서는 택지개발시 토지이용을 참고하여 콘크리트 포장, 아스팔트 포장, 토사, 초지, 투수성 포장재 등 5가지로 구분하여 표면재료별 실험을 실시하였으며, 개개 실험별 강우조건은 20, 30, 50, 80, 100, 200mm/hr로 구분하여 수행하였다. 표면재료에 따른 침투율 실험 결과, 투수성 포장재의 경우 200mm/hr 이하에서 약 93%이상의 침투율을 확보할 수 있는 것으로 측정되었다. 다짐 흙과 초지의 경우에 종기침투율은 약 13%에서 약 67%까지 나타났으며, 또한 아스팔트 및 콘크리트 포장의 경우 대부분 직접 유출되고 종기침투율은 매우 적은 것으로 측정되었다. 우수유출 저감시설의 표면재료로 투수성 포장재를 사용하는 것이 침투량 확보측면에서 가장 유리하고 우수유출 저감시설의 목적인 방재 및 치수 측면에 활용할 수 있을 것으로 판단되었다.

  • PDF

MTV를 적용한 아스팔트 포설에서 열분리 저감 효과 (Effect of Thermal Segregation Reduction in Asphalt Paving with MTV)

  • 권기철
    • 한국도로학회논문집
    • /
    • 제20권4호
    • /
    • pp.1-6
    • /
    • 2018
  • PURPOSES : The objective of this study is to evaluate of the effect of thermal segregation reduction in asphalt paving using material transfer vehicles (MTVs). METHODS : Asphalt paving using MTVs was carried out, and the paved surface temperature was measured using an infrared camera. The amount of thermal segregation was estimated from temperature variations. RESULTS : The transportation of hot mix asphalt (HMA) using dump trucks caused temperature segregation that persisted in the paving surface if an MTV was not used. The average temperature variation was 8.58% in paved surfaces where an MTV was not used. However, the temperature variation was 3.10%, 2.86%, and 4.53% for the base layer, inter-layer, and surface layer, respectively, when an MTV was used. CONCLUSIONS : The use of an MTV in asphalt paving reduces thermal segregation approximately 2.3 times in an asphalt mat via a remixing process and also allows for a smoother work process because the paver never needs to stop to receive HMA. However, MTV equipment without pre-heating devices requires careful temperature control during the warm up process at the MTV during construction in the winter.

폴리우레탄을 이용한 자전거도로의 탄성포장재 특성 (Characteristic of Elastic Paving Materials in Bicycle Road using Polyurethane)

  • 이영세
    • 한국산업융합학회 논문집
    • /
    • 제17권1호
    • /
    • pp.7-14
    • /
    • 2014
  • In this study, characteristic of elastic paving materials in bicycle road using polyurethane were studied experimentally. As a results, following their good result was obtained. Bicycle road packaging materials are flexural strength g test, ratio of mass change after freezing and thawing, repulsion elasticity test, water Permeation coefficient test and slip resistance test results showed good performance.

탄성포장재의 기초물성에 관한 실험적 연구 (An Experimental Study on the Basic Properties of Elastic Paving Materials)

  • 고훈범;고만영
    • 한국산학기술학회논문지
    • /
    • 제16권7호
    • /
    • pp.5021-5028
    • /
    • 2015
  • 탄성포장재에 대한 기존의 연구는 포장재의 투수성, 공법적용에 관한 접근이 많아 탄성포장재의 기초적인 성능연구보다 실용화에 초점을 맞춘 연구가 많았다. 본 연구에서는 경제적인 차원에서 필요한 탄성조건과 투수성 등을 만족하면서 콘크리트나 아스팔트로 포장된 장소에서 기존 하층 노면에 대한 재시공 없이 자원낭비나 환경오염이 발생하지 않도록 두께가 얇은 탄성포장재의 시공 가능성에 대하여 두께가 다른 5종류(10, 13, 15, 20, 25mm)의 시험편과 고무 칩과 바인더의 혼합비가 다른 3개(20, 22.5, 25%)의 시험편을 가지고 다양한 시험을 실시하고 기본적인 물성을 파악하였다. 결과적으로 정성적인 관점에서 탄성바닥재의 두께를 품질조건에 따라 최소한(10~25mm)으로 할 수 있는 여지가 있으며, 바닥재가 온도에 민감하여 내구성증진에 대한 대안도 필요하다고 판단된다.

중질유 고도정제 부산물의 도로포장용 역청재료로서의 적용성 평가 (Evaluation of Applicability of Heavy Oil Upgrading By-Product (Pitch) as A Pavement Paving Material)

  • 양성린
    • 한국도로학회논문집
    • /
    • 제16권5호
    • /
    • pp.9-18
    • /
    • 2014
  • PURPOSES : The objective of this study is to evaluate the applicability of the pitch, which is produced during SDA petroleum upgrading process, as a pavement paving material. In order for the purpose, the physical and chemical properties of the pitch are analyzed, and then the various plasticizers are applied in the pitch. METHODS : Two types of pitch are selected from oil refinery companies, which are owned the SDA petroleum upgrading process. Also, two types of asphalt binders, PG 64-22 and PG 58-22, are employed to compare with the pitch because these two types of asphalt binders are currently used as paving materials. For the chemical property of the pitch, the composition of SARA (Saturate, Aromatic, Resin, Asphaltene), the elementary composition, and the functional group are analyzed. For the physical property of the pitch, the basic material property tests, such as penetration test, softening point test, flash point test, ductility test, and rotational viscometer test, are performed. Also, the DSR (Dynamic Shear Rheometer) test and the BBR (Bending Beam Rheometer) test are conducted using asphalt binder specimens obtained by both short term aging (Rolling Thin Film Oven, RTFO) and long term aging (Pressure Aging Vessel, PAV) processes. The rheological property of each pitch type is evaluated as a function of temperatures and loading cycles. PG 64-22 asphalt binder is used as a control material. RESULTS AND CONCLUSIONS : The Pitch may not be suitable for the pavement paving material without modifications, but the pitch can be used as alternatives of modified addictive or asphalt. If low molecular component, such as saturate and aromatic components, are added in the pitch based on the development of various plasticizers, it has a strong possibility for the pitch to be used as a alternative. However, in order to verify the performance property of the pitch, further research is needed.

톱밥과 우레탄 수지 혼합물로 제조한 탄성 포장재의 특성 (Characteristics of Elastic Paving Material Made of Sawdust and Urethane Resin Mixture)

  • 최재진;이관호;문승권
    • 한국산학기술학회논문지
    • /
    • 제18권6호
    • /
    • pp.673-680
    • /
    • 2017
  • 공원 산책로 및 관광지의 포장재로서 목재 칩-우레탄 수지 혼합물의 연구 및 상업화가 진행 중에 있다. 본 연구에서는 활발한 몸동작이 일어나는 놀이터에서 이러한 포장재의 이용을 확대하기 위한 방안을 강구하고자 하였다. 이를 위해, 목재 칩 (10mm 체를 통과하고 3mm 체에 남는 것)의 일부 또는 전부를 톱밥으로 대체한 목질 포장재의 물리적 성질 및 안전성을 실험에 의해 검토하였다. 우레탄 수지, 톱밥 및 목재 칩의 혼합비를 변화시켜 인장 강도, 휨강도, 탄성계수, 미끄럼 저항성, 충격 흡수성, 중금속 함량 및 용출 시험을 실시하였다. 그 결과, 톱밥과 목재 칩의 총 질량에 대한 수지의 질량비가 1.0 및 1.2이고, 톱밥과 목재 칩의 총 질량에 대한 톱밥의 질량비가 0~0.4인 시험체의 경우, KS F 3888-2의 표준을 대체로 만족함으로써 놀이터 등에서의 이용 가능성을 확인하였다. 그러나 목질 재료로 톱밥만을 사용한 경우에는 충격 흡수성이 기준치를 밑돌고, 규정된 인장 강도를 확보하기 위해서 톱밥과 수지의 질량비는 1.2 이상을 필요로 하는 것으로 나타났다.

친환경 고화재를 이용한 임도포장의 현장 적용성 연구 (Field Application of an Eco-Friendly Solidification Material for Forest Road Pavement)

  • 이관희;고치웅;김동현;오세욱;김동근
    • 한국산림과학회지
    • /
    • 제106권1호
    • /
    • pp.70-76
    • /
    • 2017
  • 임도포장공법 중 현재 많이 시공되는 콘크리트 포장은 하부지반의 침식으로 인해 균열이 많이 발생하며, 경사가 급한 경우 결빙으로 인하여 임도로서 역할을 수행할 수 없으며, 그리고 콘크리트가 갖고 있는 유해성(6가 크롬 등) 때문에 산림을 건강의 목적으로 생각하는 국민정서에 반하는 단점이 있다. 이러한 측면에서 본 연구는 콘크리트 포장의 문제점을 보완하기 위해 친환경 고화재를 이용하여 경북 고령군 쌍림면에 시설된 임도 85 m에 시험포장을 실시하여 임도포장의 공정과 비용, 강도와 다짐도를 조사하였다. 임도포장공정은 요소작업별로 준비작업, 노면 터파기, 노면 고르기, 하부지반 다짐, 거푸집 설치, 유용토 채취 및 선별, 믹싱, 포설, 다짐, 양생으로 이루어지며, 일위대가를 통한 개략적인 단가산출을 한 결과 콘크리트 포장의 경우는 일반적으로 노무비, 재료비, 경비를 합한 총 38,681원/$m^3$, 친환경 고화재의 경우 총 합계 38,245원/$m^3$으로 시공비용은 비슷하게 나타났다. 또한 양생기간에 따른 강도 특성을 알아보기 위하여 비파괴시험인 슈미트 해머 시험을 실시한 결과 양생기간 7일은 10.5~13.5 MPa, 14일은 18.1~22.7 MPa, 28일은 20.8~23.0 MPa로 양생기간 14일에서 강도증가 폭이 가장 높게 나타났다.

친환경 소프트 포장재의 공학적 특성에 관한 연구 (Charateristics of Soft Paving Materials used Eco-friendly)

  • 전두준;박승진
    • 한국재난정보학회 논문집
    • /
    • 제15권2호
    • /
    • pp.206-213
    • /
    • 2019
  • 연구목적: 본 연구에서는 친환경 소재인 알톱밥과 EPDM칩을 사용하여 친환경 포장재의 개발을 목적으로 한다. 연구방법: 친환경 재료로 환경적으로 문제가 없고, EPDM칩을 사용함으로써 보행감을 높이며, 알톱밥에 소금물 혼합 우드스테인과 우레탄바인더를 혼합하여 내구성을 향상시킨다. 연구결과: 배합설계 시험을 통하여 최적 배합비를 산출하였고, 배합비를 바탕으로 세립의 알톱밥과 EPDM칩을 사용하여 보도의 표층재, 단입도의 알톱밥만을 사용하여 투수성과 반탄력을 갖춘 보도의 기층재 및 자전거도로의 표층재로 구성하였고 시험시공을 통해 적용공법을 제시하였다. 결론: 본 연구를 통해 기존의 탄성포장재와 달리 휨강도를 제시하고 우수한 투수계수를 나타냄으로 보도포장재로서 경제적인 시공이 바로 가능할 것으로 판단된다.

A Feasibility Study of Wood-plastic Composite Paver Block for Basic Rest Areas

  • Yang, Sungchul
    • Journal of the Korean Wood Science and Technology
    • /
    • 제47권1호
    • /
    • pp.51-65
    • /
    • 2019
  • A wood-plastic composite (WPC) paver block was manufactured using wood chips waste through an extrusion process, and it was intended to be used for paving in basic rest areas. The first stage in this study covered preliminary tests in terms of flexural strength and dimensional swelling to determine the optimal WPC compounding mix condition, by variation of the WPC ingredients. Next, three different paver blocks including the WPC block, a non-porous cement block, and a porous cement block were tested in terms of various material properties in the laboratory. Finally, two outdoor test sections of the proposed paver blocks were prepared to simulate a basic rest area. Test results indicated that the flexural strength of the WPC paver blocks was about 1.6 times greater than that of the tested cement paver blocks. The WPC block pavement was unaffected by water buoyance as well as volume expansion due to swelling. Results from the impact absorbance test and light falling weight deflectometer (LFWD) test clearly showed that the WPC block paving system marginally satisfied the comfortable and safe hardness range from the pedestrians' perspective, while the results demonstrated that it is structurally sound for application as a road paving block.

보도포장의 종류에 따른 보행자의 안전성 및 쾌적감에 대한 연구 (A Study on the Safety and Comfort of Pedestrians according to the Type of Sidewalk Pavement)

  • 최재진
    • 한국안전학회지
    • /
    • 제30권1호
    • /
    • pp.66-71
    • /
    • 2015
  • Safety, resilience and comfort of pedestrian were assessed by the British Pendulum Test and SB/GB factor test at 8 kinds of sidewalk pavement. Sidewalk paving materials were normal concrete, porous concrete, concrete block, soil concrete, asphalt, rubber chip/resin mixture, wood chip/resin mixture and floor tile. In addition, a survey was conducted to investigate the perception of pedestrians on the sidewalk paving material. As a result, while the skid resistance value was measured in the most 60BPN above, the floor tile showed a low value of about 30BPN. The ratios of SB factor to GB factor of the elastic pavements(rubber/resin mixture and wood chip/resin mixture) appeared to be relatively large when compared with those of the conventional sidewalks. The survey showed that respondents perceived as more safe and comfortable elastic pavements compared to conventional pavements. Approximately 50% of respondents answered that hardened soil pavement was the most environmentally friendly.