• 설비공학논문집
• /
• 제16권10호
• /
• pp.914-922
• /
• 2004

In this study, measurement and analysis of energy consumption of a research building have been conducted. The energy audit procedure includes monitoring of electricity and LNG consumption over a period of three yews from 2000 to 2002. Data acquisition system for collecting energy consumption data of HVAC equipment such as chillers, fan filter units, AHUs, cooling towers, boilers, pumps, fan coil units, air compressors and etc. has been installed in a building located in Seoul. Data collected at an interval of 1 minute are analyzed for studying the energy consumption pattern of a research building. Percentage of energy consumption of all HVAC equipment is $51.0\%$ in 2000, $55.4\%$ in 2001, and $62.3\%$ in 2002, respectively. Electricity consumption of chillers accounts for $17.6\%$ of the total energy consumption, which is the largest. Annual energy consumption-rate per unit area is $840.5Mcal/m^2{\cdot}y$ in 2000, $1,064.8Mcal/m^2{\cdot}y$ in 2001, and $1,393.0Mcal/m^2{\cdot}y$ year 2002, respectively.

• 한국광학회지
• /
• 제14권3호
• /
• pp.244-248
• /
• 2003

공초점 렌즈의 조합으로 사용되는 두 렌즈의 초점거리의 비율에 해당하는 비율 만큼 입사되는 광의 입사각을 줄일 수 있다. 이 결과로 CCD상의 간섭 패턴의 공간 주파수가 낮아진다. 따라서 CCD의 구성 화소들의 간격에 의해 한정되는 기록 가능한 공간 주파수 보다 높은 공간 주파수의 간섭 패턴을 기록할 수 있어 보다 큰 물체의 간섭 패턴을 기록할 수 있다. 또한 이러한 광학계로 기록한 간섭 패턴의 수치적 재생(Numerical Reconstrction) 결과에서는 0-차 회절광의 면적이 초점거리 비율의 역수의 제곱에 해당하는 만큼 축소되는 장점이 있다.

• Journal of Preventive Medicine and Public Health
• /
• 제52권1호
• /
• pp.41-50
• /
• 2019

Objectives: The aim of this study was to investigate cancer patients' utilization of tertiary hospitals in Seoul before and after the benefit expansion policy implemented in 2013. Methods: This was a before-and-after study using claims data of the Korean National Health Insurance Service from 2011 to 2016. The unit of analysis was inpatient episodes, and inpatient episodes involving a malignant neoplasm (International Classification of Diseases, Tenth Revision codes: C00-C97) were included in this study. The total sample (n=5 565 076) was divided into incident cases and prevalent cases according to medical use due to cancer in prior years. The tertiary hospitals in Seoul were divided into two groups (the five largest hospitals and the other tertiary hospitals in Seoul). Results: The proportions of the incident and prevalent episodes occurring in tertiary hospitals in Seoul were 34.9% and 37.2%, respectively, of which more than 70% occurred in the five largest hospitals in Seoul. Utilization of tertiary hospitals in Seoul was higher for inpatient episodes involving cancer surgery, patients with a higher income, patients living in areas close to Seoul, and patients living in areas without a metropolitan city. The utilization of the five largest hospitals increased by 2 percentage points after the policy went into effect. Conclusions: The utilization of tertiary hospitals in Seoul was concentrated among the five largest hospitals. Future research is necessary to identify the consequences of this utilization pattern.

• 산업융합연구
• /
• 제15권2호
• /
• pp.1-6
• /
• 2017

본 논문은 알고리즘을 활용한 최적화를 바탕으로 한 시스템 다이내믹스 피드백 모델을 통해 고용 시뮬레이션의 특징을 제시하는 목적을 가지고 있고 직위, 근무기간, 계급 등의 요소를 중심으로 적정한 고용 인원을 제시하는 3차원 논리적 판단구조를 제공한다. 호주 육군의 고용정책에 대해 보다 신축적인 고용시스템을 제시할 목적으로 시스템 다이내믹스 모델을 통해 국방부의 변화가 심한 정책에 대한 안정적 고용 적정선을 파악한다. 특히 생산성을 최대로 발휘할 수 있는 필요한 고용 패턴 및 외부 인력의 고용, 내부인력의 타 조직으로 이동 등 다양한 가능성을 분석한다.

• 한국산업융합학회 논문집
• /
• 제25권1호
• /
• pp.55-60
• /
• 2022

This study conducted the measurements of air flow rate for blower systems with experiment and numerical. A new airflow rate test method is suggested, with which it is possible to accurate measurements and calculate the air flow rate for blower systems. The blower(axial fan) is an industrial fluid machine device that supplies a large amount of air by driving an impeller with an electric motor, and it is widely used throughout the industry such as steel, power plant, chemical, semiconductor, LC D, food, and cement. The airflow from the blower is for exchanging the heat in the cooling unit or heat exchanger. The temperature of coolants and hydraulic oil primarily depends on the amount of airflow rate through the cooling package so its accurate estimation is very important. Moreover, it required a larger investment in time and cost since it could not be executed until the system is actually made. Therefore, this research is intended to examine the phenomenon of air flow pattern when testing air flow rate, suggested new test method, and show the result of the validation test.

• 한국공간구조학회논문집
• /
• 제22권2호
• /
• pp.29-37
• /
• 2022

The collapse of reinforced concrete (RC) frame buildings is mainly caused by the failure of columns. To prevent brittle failure of RC column, numerous studies have been conducted on the seismic performance of strengthened RC columns. Concrete jacketing method, which is one of the retrofitting method of RC members, can enhance strength and stiffness of original RC column with enlarged section and provide uniformly distributed lateral load capacity throughout the structure. The experimental studies have been conducted by many researchers to analyze seismic performance of seismic strengthened RC column. However, structures which have plan and vertical irregularities shows torsional behavior, and therefore it causes large deformation on RC column when subjected to seismic load. Thus, test results from concentric cyclic loading can be overestimated comparing to eccentric cyclic test results, In this paper, two kinds of eccentric loading pattern was suggested to analyze structural performance of RC columns, which are strengthened by concrete jacketing method with new details in jacketed section. Based on the results, it is concluded that specimens strengthened with new concrete jacketing method increased 830% of maximum load, 150% of maximum displacement and changed the failure modes of non-strengthened RC columns.

• International Journal of Contents
• /
• 제18권2호
• /
• pp.68-80
• /
• 2022

The health of the human heart is commonly measured using ECG (Electrocardiography) signals. To identify any anomaly in the human heart, the time-sequence of ECG signals is examined manually by a cardiologist or cardiac electrophysiologist. Lightweight anomaly detection on ECG signals in an embedded system is expected to be popular in the near future, because of the increasing number of heart disease symptoms. Some previous research uses deep learning networks such as LSTM and BiLSTM to detect anomaly signals without any handcrafted feature. Unfortunately, lightweight LSTMs show low precision and heavy LSTMs require heavy computing powers and volumes of labeled dataset for symptom classification. This paper proposes an ECG anomaly detection system based on two level BiLSTM for acceptable precision with lightweight networks, which is lightweight and usable at home. Also, this paper presents a new threshold technique which considers statistics of the current ECG pattern. This paper's proposed model with BiLSTM detects ECG signal anomaly in 0.467 ~ 1.0 F₁ score, compared to 0.426 ~ 0.978 F₁ score of the similar model with LSTM except one highly noisy dataset.

• 동남아시아연구
• /
• 제22권1호
• /
• pp.207-245
• /
• 2012

With rapid industrialization and urbanization, numerous cities are faced with urban slum phenomenon combined with housing shortage fueled by population explosion. In Kuala Lumpur, the capital city of Malaysia, the government hereby embarked on supply of public housing to resolve such pending issue. This study aims to understand the periodic changes of public housing as a common basis for basic housing policies with analysis specific features of site plan, block layout, and unit plans. For this purposes, the filed survey during January, 2011 were proceeded. We hereby visited and surveyed a total of 40 apartment complexes for the 1970s~the 2000s (10 complexes respectively on a decade basis). Consequently, Malaysian public apartments prove to offer a very uniform pattern based upon standard plans. Their early plans aren't fairly distincted from those of other countries, but their layouts of plan become differentiated compared with other nations as they actively apply a ventilator called 'air well' in response to tropical climate amid the change of times. This study is expected to broaden our understanding of Malaysia's unique housing culture and lifestyle.

• 영어영문학
• /
• 제55권1호
• /
• pp.129-152
• /
• 2009

The paper aims to prove symmetries of the left and right edges of a morphological unit through the analysis of English blends. Blends are the words derived from two existing words by snipping the middle parts out and putting the rest together, such as smog (

• 소성∙가공
• /
• 제33권1호
• /
• pp.5-11
• /
• 2024

The development of a next-generation hydrogen compressor, a key component in the expansion of hydrogen charging infrastructure, is in progress. In order to improve compression efficiency and durability, it is important to optimize the precision forming and shearing processes of the diaphragm, which is the bellows unit cell, as well as the optimization of diaphragm shape itself. In this study, we aim to show that die and process design technology that can synchronize the inner and outer shearing points of the diaphragm for the precision forming of product can be constructed based on a numerical simulation. First, the damage model that can predict the fracture points will be determined using the shear load and shear zone measurements obtained by performing a blanking test of AISI-633 stainless steel. Next, we will explain the overall procedure based on numerical analysis model how to determine the shearing points according to the deformation pattern of urethane die for various shearing die design.