• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.244-248
• /
• 2003

When confocal lenses are applied to a digital holography system, the interference pattern of a larger object size can be recorded on CCD. The angle of incoming light to the CCD can be reduced by the ratio of the two focal lengths of confocal lenses. The recordable spatial frequency is limited by the unit cell size of the CCD. Therefore the spatial frequency of interference on the CCD is lowered by reduction of the incoming light angle. By using confocal lenses , another merit can be achieved that the area of the zero order diffraction is reduced by the square of the ratio of two focal lengths at the numerical reconstruction.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.1
• /
• pp.41-50
• /
• 2019

Objectives: The aim of this study was to investigate cancer patients' utilization of tertiary hospitals in Seoul before and after the benefit expansion policy implemented in 2013. Methods: This was a before-and-after study using claims data of the Korean National Health Insurance Service from 2011 to 2016. The unit of analysis was inpatient episodes, and inpatient episodes involving a malignant neoplasm (International Classification of Diseases, Tenth Revision codes: C00-C97) were included in this study. The total sample (n=5 565 076) was divided into incident cases and prevalent cases according to medical use due to cancer in prior years. The tertiary hospitals in Seoul were divided into two groups (the five largest hospitals and the other tertiary hospitals in Seoul). Results: The proportions of the incident and prevalent episodes occurring in tertiary hospitals in Seoul were 34.9% and 37.2%, respectively, of which more than 70% occurred in the five largest hospitals in Seoul. Utilization of tertiary hospitals in Seoul was higher for inpatient episodes involving cancer surgery, patients with a higher income, patients living in areas close to Seoul, and patients living in areas without a metropolitan city. The utilization of the five largest hospitals increased by 2 percentage points after the policy went into effect. Conclusions: The utilization of tertiary hospitals in Seoul was concentrated among the five largest hospitals. Future research is necessary to identify the consequences of this utilization pattern.

• Journal of Industrial Convergence
• /
• v.15 no.2
• /
• pp.1-6
• /
• 2017

This paper illustrates key features of an enterprise employment simulation which integrates a system dynamic feedback model with a cost-effectiveness optimisation capability utilising genetic algorithms. Its core is a 3-dimensional array structure tracking staff numbers by rank, by time-in-rank, by years-of-service. The resultant model, which could readily be adapted to non-Defence use, can identify, given user specification of any mix of employment rules, the likely patterns of employment behaviour including: resultant time-in-rank and years-of-service profiles; ability of a Unit to fill all positions to target strength; ability to fill promotional positions within normal rules for substantive promotion; need to fill promotional positions using rules for temporary promotion or transfer from outside; necessary recruitment pattern to sustain target strength.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.1
• /
• pp.55-60
• /
• 2022

This study conducted the measurements of air flow rate for blower systems with experiment and numerical. A new airflow rate test method is suggested, with which it is possible to accurate measurements and calculate the air flow rate for blower systems. The blower(axial fan) is an industrial fluid machine device that supplies a large amount of air by driving an impeller with an electric motor, and it is widely used throughout the industry such as steel, power plant, chemical, semiconductor, LC D, food, and cement. The airflow from the blower is for exchanging the heat in the cooling unit or heat exchanger. The temperature of coolants and hydraulic oil primarily depends on the amount of airflow rate through the cooling package so its accurate estimation is very important. Moreover, it required a larger investment in time and cost since it could not be executed until the system is actually made. Therefore, this research is intended to examine the phenomenon of air flow pattern when testing air flow rate, suggested new test method, and show the result of the validation test.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.2
• /
• pp.29-37
• /
• 2022

The collapse of reinforced concrete (RC) frame buildings is mainly caused by the failure of columns. To prevent brittle failure of RC column, numerous studies have been conducted on the seismic performance of strengthened RC columns. Concrete jacketing method, which is one of the retrofitting method of RC members, can enhance strength and stiffness of original RC column with enlarged section and provide uniformly distributed lateral load capacity throughout the structure. The experimental studies have been conducted by many researchers to analyze seismic performance of seismic strengthened RC column. However, structures which have plan and vertical irregularities shows torsional behavior, and therefore it causes large deformation on RC column when subjected to seismic load. Thus, test results from concentric cyclic loading can be overestimated comparing to eccentric cyclic test results, In this paper, two kinds of eccentric loading pattern was suggested to analyze structural performance of RC columns, which are strengthened by concrete jacketing method with new details in jacketed section. Based on the results, it is concluded that specimens strengthened with new concrete jacketing method increased 830% of maximum load, 150% of maximum displacement and changed the failure modes of non-strengthened RC columns.

• International Journal of Contents
• /
• v.18 no.2
• /
• pp.68-80
• /
• 2022

The health of the human heart is commonly measured using ECG (Electrocardiography) signals. To identify any anomaly in the human heart, the time-sequence of ECG signals is examined manually by a cardiologist or cardiac electrophysiologist. Lightweight anomaly detection on ECG signals in an embedded system is expected to be popular in the near future, because of the increasing number of heart disease symptoms. Some previous research uses deep learning networks such as LSTM and BiLSTM to detect anomaly signals without any handcrafted feature. Unfortunately, lightweight LSTMs show low precision and heavy LSTMs require heavy computing powers and volumes of labeled dataset for symptom classification. This paper proposes an ECG anomaly detection system based on two level BiLSTM for acceptable precision with lightweight networks, which is lightweight and usable at home. Also, this paper presents a new threshold technique which considers statistics of the current ECG pattern. This paper's proposed model with BiLSTM detects ECG signal anomaly in 0.467 ~ 1.0 F₁ score, compared to 0.426 ~ 0.978 F₁ score of the similar model with LSTM except one highly noisy dataset.

• The Southeast Asian review
• /
• v.22 no.1
• /
• pp.207-245
• /
• 2012

With rapid industrialization and urbanization, numerous cities are faced with urban slum phenomenon combined with housing shortage fueled by population explosion. In Kuala Lumpur, the capital city of Malaysia, the government hereby embarked on supply of public housing to resolve such pending issue. This study aims to understand the periodic changes of public housing as a common basis for basic housing policies with analysis specific features of site plan, block layout, and unit plans. For this purposes, the filed survey during January, 2011 were proceeded. We hereby visited and surveyed a total of 40 apartment complexes for the 1970s~the 2000s (10 complexes respectively on a decade basis). Consequently, Malaysian public apartments prove to offer a very uniform pattern based upon standard plans. Their early plans aren't fairly distincted from those of other countries, but their layouts of plan become differentiated compared with other nations as they actively apply a ventilator called 'air well' in response to tropical climate amid the change of times. This study is expected to broaden our understanding of Malaysia's unique housing culture and lifestyle.

• Journal of English Language & Literature
• /
• v.55 no.1
• /
• pp.129-152
• /
• 2009

The paper aims to prove symmetries of the left and right edges of a morphological unit through the analysis of English blends. Blends are the words derived from two existing words by snipping the middle parts out and putting the rest together, such as smog (

• Transactions of Materials Processing
• /
• v.33 no.1
• /
• pp.5-11
• /
• 2024

The development of a next-generation hydrogen compressor, a key component in the expansion of hydrogen charging infrastructure, is in progress. In order to improve compression efficiency and durability, it is important to optimize the precision forming and shearing processes of the diaphragm, which is the bellows unit cell, as well as the optimization of diaphragm shape itself. In this study, we aim to show that die and process design technology that can synchronize the inner and outer shearing points of the diaphragm for the precision forming of product can be constructed based on a numerical simulation. First, the damage model that can predict the fracture points will be determined using the shear load and shear zone measurements obtained by performing a blanking test of AISI-633 stainless steel. Next, we will explain the overall procedure based on numerical analysis model how to determine the shearing points according to the deformation pattern of urethane die for various shearing die design.

• Journal of Microbiology
• /
• v.44 no.6
• /
• pp.660-664
• /
• 2006

The relationship between H. pylori clarithromycin resistance and genetic pattern distribution has been differently explained from different geographic areas. Therefore, we aimed to assess the clarithromycin resistance rate, to evaluate the bacterial genetic pattern, and to search for a possible association between clarithromycin resistance and cagA or vacA genes. This prospective study enrolled 62 consecutive H. pylori infected patients. The infection was established by histology and rapid urease test. Clarithromycin resistance, cagA and vacA status, including s/m subtypes, were assessed on paraffin-embedded antral biopsy specimens by TaqMan real time polymerase chain reaction (PCR). Primary clarithromycin resistance was detected in 24.1 % of cases. The prevalence of cagA was 69.3%, and a single vacA mosaicism was observed in 95.1 % cases. In detail, the s1m1 was observed in 23 (38.9%) patients, the s1m2 in 22 (37.2%), and the s2m2 in 14 (23.7%), whereas the s2m1 combination was never found. The prevalence of cagA and the vacA alleles distribution did not significantly differ between susceptible and resistant strains. Primary clarithromycin resistance is high in our area. The s1m1 and s1m2 are the most frequent vacA mosaicisms. There is no a relationship between clarithromycin resistance and bacterial genotypic pattern and/or cagA positivity.