• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.585-590
• /
• 2000

Recently, It is gradually raised necessity that thickness of thin film is measured accuracy and managed in industrial circles and medical world. Ultrasonic Signal processing method is likely to become a very powerful method for NDE method of detection of microdefects and thickness measurement of thin film below the limit of Ultrasonic distance resolution in the opaque materials, provides useful information that cannot be obtained by a conventional measuring system. In the present research, considering a thin film below the limit of ultrasonic distance resolution sandwiched between three substances as acoustical analysis model, demonstrated the usefulness of ultrasonic Signal processing technique using information of ultrasonic frequency for NDE of measurements of thin film thickness, sound velocity, and step height, regardless of interference phenomenon. Numeral information was deduced and quantified effective information from the image. Also, pattern recognition of a defected input image was performed by neural network algorithm. Input pattern of various numeral was composed combinationally, and then, it was studied by neural network. Furthermore, possibility of pattern recognition was confirmed on artifical defected input data formed by simulation. Finally, application on unknown input pattern was also examined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.356-361
• /
• 1996

Nowadays, Electronic Speckle Pattern Interferometry is a well established measuring technique with a wide range of industrial applications, particularly in the fields of deformation measurement and vibration analysis. Comparing with holographic inteferometry, it has some attractive features, which are rapid recording and reconstruction, satisfiable automation etc. Time-average ESPI was used to provide vibration mode shape of an object whose vibration amplitude is given as a fringe pattern. However, it is not possible to determine the direction of motions of a point on the object at any given time, because time-average method does not give any information about the phase of vibration. A better technique is stroboscopic method which can measure the amplitude and phase of vibrating surface. In this paper, loudspeakers were tested by these two methods and the mode shape and amplitude of vibration were visualized. As measured results, we can assume that these techniques will be applied directly in the loudspeaker industry.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.814-822
• /
• 1986

Flow patterns and its transitions in vertical two phase flow of air-water isothermal flow are identified objectively by void output signals and moments computed from the Probability Density Function which is associated with the statistical measurement for time average local void fractions using conductance probe. It has been shown that the probe output signals, PDF distributions and its moments are deterministic criteria of flow pattern and transition classification.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.240-242
• /
• 2014

This paper presents the system which can be predicted 3-D underwater radiated noise pattern using submarine hull velocity and can be analyzed the counter detected performance for threats in real time. To verify the developed system the tests were done in a water tank for structure like a submarine. The far field radiated noise pattern predicted using the developed system is compared with the result calculated using the near field measurement system, these results have shown good agreement.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2399-2401
• /
• 1999

This paper indicate that phase resolved partial discharge pattern are investigated on PET films with semiconductor particle. In this study, we measured phase-resolved PD pattern and statistical parameter from PET specimens according to containing semiconductor particle. Measurement system is the conventional PD detector using digital signal processing technique. The relationship of semiconductor particle in PET film was discussed through the difference of $\psi$-q-n distribution and statistical analysis.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.5
• /
• pp.592-600
• /
• 2006

The pattern recognition of the complicated grasping operation based on electroencephalography (simply named as EEG) is very helpful on realtime control of the robotic hand. In the paper, a new spectral feature analysis method based on Band Pass Filter (simply named as BPF) and Power Spectral Analysis (simply named as PSA) is presented for discriminating the complicated grasping operations. By analyzing the spectral features of grasping operations with the use of the two-channel EEG measurement system and the pattern recognition of the BP neural network, the degree of recognition by the traditional spectral feature method based on FFT and the new spectral features method based on BPF and PSA could be compared. The results show that the proposed method provides highly improved performance than the traditional one because the new method has two obvious advantages such as high recognition capability and the fast learning speed.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.1
• /
• pp.81-91
• /
• 1993

Studies on the flow pattern due to reclamation in the Myunggi-Nocksan region are carried out based on field observations and numerical experiments. Serial time series measurement of current, temperature and salinity were conducted for 1 tidal period at intervals of 1 hour from surface to bottom on station located at 128.deg. 54' 44" E, 35.deg. 01' 04" N in April and June 1992. Surface current opposite to the subsurface current causes turbulent mixing to make homogeneous salinity pattern in vertical section. Reclamation has little effect on the wave pattern and flow patterns are also nearly similar except on the nearby region of reclamation where flow speed somewhat weakened.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2094-2102
• /
• 2016

In this paper, we propose an extended Kalman filter(EKF)-based simultaneous localization and mapping(SLAM) method using laser corner pattern matching for mobile robots. SLAM is one of the most important problems of mobile robot. However, existing method has the disadvantage of increasing the computation time, depending on the number of landmarks. To improve computation time, we produce the corner pattern using classified and detected corner points. After producing the corner patterns, it is estimated that mobile robot's global position by matching them. The estimated position is used as measurement model in the EKF. To evaluated proposed method, we preformed the experiments in the indoor environments. Experimental results of proposed method are shown to maintain an accuracy and decrease the computation time.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.205-219
• /
• 1993

The purpose of this study was to determine maximal width of bodice and skirt pattern of 50 college girls for more scientific patternmaking development in clothing construction. The body measurements data of this study was calculated by SAS, means analysis, regression analysis and T-test were used. The results are as follows. 1. The results of analyzing the whole 85 items of the entire body measurements of model are in table 2. 2. It was suggested the whole average cross section of measurement parts by rohrer index as the result of gathering the each section. 3. Representative items were suggested as fundamental parts in determining the maximal width of bodice and skirt basic pattern by rohrer index. 4. The entire abbreviated calculation formula of bodice and xkirt pattern was suggested.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.187-192
• /
• 1999

Noncontact measuring methodology of 3-dimensional profile using CCD camera are very attractive because of it's high measuring speed and its's high sensitivity. Especially when projecting a grid pattern over the object, the captured image have 3 dimensional information of the object. Projection moire extract 3-D information with another grid pattern in front of CCD camera. However phase measuring profilometry(PMP) obtain similar results without additional grid pattern. In this paper, the projection moire are compared with the PMP mathematically, and it is shown that PMP can generate moire image with simple mathematical computations. Experimental works are also carried out showing the same results. It is shown that using a single gird pattern, moire image can be obtained directly without any mathematical operation when some conditions are satisfied.