• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.307-310
• /
• 2000

The measuring method of large object using the pattern matching is discussed in the paper. It is hard and expensive to get the complete 3D data when the object is large or exceeds the limit of measuring devices. The large object is divided into several smaller areas and is scanned several times to get the data of all the pieces. These data are aligned to get the complete 3D data using the pattern matching method. The point pattern matching method and transform matrix algorithm are used for aligning. The laser slit beam and CCD camera is applied for experimental measurement. Visual C++ on Window98 is implemented in processing the algorithm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.19-22
• /
• 2000

Noncontact measuring methodology of 3-dimensional profile using CCD camera are very attractive because of it's high measuring speed and its's high sensitivity. Especially, when projecting a grid pattern over the object the captured image have 3 dimensional information of the object. Projection moire extract 3-D information with another grid pattern in front of CCD camera. However phase measuring profilometry(PMP) obtain similar results without additional grid pattern. In this paper, new method for grid pattern generation system by polygonal mirror and Laser Diode. This system is applied the projection moire and the PMP.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.89-91
• /
• 2001

This paper presents the result of pattern classification of load demand for distribution transformer in domestic. The field data of load demand is measured using the load acquisition device and the measurement data is used for the database system for load management of distribution transformed. For the pattern classification, the load data and the customer information data are also used. The K-MEAN method is used for the pattern classification algorithm. The result of pattern classification is used for the 2-step format of load demand curve.

• Journal of Mechanical Science and Technology
• /
• v.18 no.10
• /
• pp.1849-1858
• /
• 2004

For examining friction-factor characteristics of round-hole pattern surfaces which are usually applied on damper seals, flat plate test apparatus is designed and fabricated. The measurement method of leakage and pressure distribution along round-hole pattern specimen with different hole area is described and a method for determining the Fanning friction factor is discussed. Results show that the round-hole pattern surfaces provide a much larger friction factor than smooth surface, and the friction factor vs. clearance behavior yields that the friction factor generally decreases as the clearance increases unlike the results of Nava's flat plate test. As the hole depth is decreased, the friction factor is increased, and maximum friction factor is obtained for 50% of hole area. Since the present experimental friction factor results show coincident characteristics with Moody's friction factor model, empirical friction factors for round-hole pattern surfaces are obtained by using the Moody's formula based on curve-fit of the experimental data. Results of Villasmil's 2D CFD simulation support the present experimental test result.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.4
• /
• pp.59-65
• /
• 1997

In this paper, a general fuzzy syntactic method for recognition of flaw patterns and for the measurement of flaw characteristic parameters for a non-destructive inspections signal, called eddy-current, is presented. Solutions are given to the subtasks of primitive pattern selection, signal to symbol transformation, pattern grammar formulation, and event-synchronous flaw pattern extraction based on the grammars. Fuzzy attribute grammars are used as the model for the pattern grammar because of their descriptive power in the face of uncertain constraints caused by nose or distortion in the signal waveform, due to their ability to handle syntactic as well as semantic information. This approach has been implemented and the performance of eh resultant system has been evaluated using a library of law patterns obtained from steam generator tubes in nuclear power plants by an eddy current-based non-destructive inspection method.

• Journal of the Korean Institute of Navigation
• /
• v.4 no.2
• /
• pp.1-6
• /
• 1980

Computer simulation results on the radiation pattern of an ultrasonic beam by the plurall arrangement of the transducers were reported by Sin (1979). This paper describes on the measurement of radiation pattern in case of one vibrox transducer and two vibrox transducers by varying the interval between the transducers. The measured results obtained are as follows; 1. Radiation wave of ultrasonic transducer is propagated to diffuse with spherical wave from center of transducer. 2. In case of one vibrox transducer, the greater the length of transducer, the sharper becomes the radiation pattern. 3. In case of two vibrox transducers, the maine lobe is revealed at the center of two transducers, it is shown difficult to make control freely of radiation pattern by varying merely the interval of transducers.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.25-30
• /
• 2018

Pattern classification system is often an important component of intelligent systems. In this paper, we present a pattern classification system consisted of the feature selection module, knowledge base construction module and decision module. We introduce a feature impact evaluation selection method based on fuzzy cluster analysis considering computational approach and generalization capability of given data characteristics. A fuzzy neural network, OFUN-NET based on unsupervised learning data mining technique produces knowledge base for representative clusters. 240 blemish pattern images are prepared and applied to the proposed system. Experimental results show the feasibility of the proposed classification system as an automating defect inspection tool.

• PNF and Movement
• /
• v.14 no.3
• /
• pp.195-202
• /
• 2016

Purpose: This study investigates the influence of applying proprioceptive neuromuscular facilitation (PNF) leg patterns on the activation of three types of mesogluteal fibers at the opposite side. Methods: The target subjects of this study were 19 healthy men who voluntarily agreed to participate in the program. For all subjects, the following four PNF leg patterns were applied while they were in a standing position, and then, the activation of the gluteus medius at the opposite side was measured: (1) flexion abduction internal rotation pattern, (2) flexion adduction external rotation pattern, (3) extension abduction internal rotation pattern, and (4) extension adduction external rotation pattern. In each position, a pattern was executed three times in 5 s, and the average of each measurement was used for the statistics. Results: Among the PNF leg patterns, the activation of the mesogluteal fibers at the opposite side was most significant under the application of the extension abduction internal rotation pattern. The activation of the back muscular fiber was significantly high under the application of the flexion abduction internal rotation pattern. Conclusion: Selective application of PNF leg patterns can improve the functional activity of each mesogluteal fiber.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.7
• /
• pp.1004-1014
• /
• 2000

The purpose of this study was to develop a well-fitting bodice basic pattern for high school irk. Two bodice patterns were first made based on the most recent existing drafting methods and sensory evaluation was done on the patterns by the present researchers Two high school girls possessing standard physical condition tried and evaluated the functionality of the garments made by the two bodice patterns. Based on the results of the evaluation, a new bodice basic pattern was developed. The new bodice basic pattern was drafted by long measurement method. The dimensions of new bodice basic pattern were as follows. Bust circumference=B/2+4cm, Arms hole depth=C.B/2+1.5cm, Back width=B/6+4cm, Front width=B/6+3cm, Back neck width=B/12+0.5cm, Back neck depth=Back neck width/3cm, Front neck width=B/12cm, Front neck depth=B/12+0.5cm. The sensory and functional evaluations were also conducted for the new bodice basic pattern and the two patterns drafted by the existing methods. The new bodice basic pattern showed better fit both visually and functionally than the existing patterns. SPSS package including means, standard deviation and one-sample T-test were used for data analysis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.2 s.24
• /
• pp.23-36
• /
• 1987

The purpose of the suudy was to develop a computer program for pattern mating of women's pant's. Computerization of the pattern making process was expected to provide higher accuracy and efficiency in pattern mating. The VAX-11/750 Computer and the CALCOMP PLOTTER 965 were used in this study. The procedures of the study were as follows : 1. A slacks pattern was selected. 2. The co-ordinate points were indicated relative location of all necessary in draffing. Total sixty co-ordinate points were instituted from (AX(1), AY(1)) to (AX(24), AY(24)), from (BX(1), BY(1)) to (BX(36), BY(36)). 3. A program for drafting was developed. Refer to (Table 3). 4. The procedures of drading of standard size were accomplished by using same method. The program was developed to drafting pattern for women by putting indivisual body measurement. The body measurements for stacks pattern were as follows : slacks length. Croach length. Hip length. nip circumference. waist circumference.