• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.975-976
• /
• 2008

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.947-950
• /
• 2015

우리나라 전체 교통사고 원인에 있어서 졸음운전은 음주운전보다도 더 큰 비중을 차지하고 있는 위험요소로 나타나고 있다. 따라서 사전에 졸음운전사고를 예방하기 위하여 운전자의 졸음을 인식하고 경고해주는 시스템 개발과 관련된 연구가 활발하게 이루어지고 있는 추세이며, 졸음의 지표는 뇌파의 알파파를 분석하는 것이 효과적이라는 선행 연구결과들이 발표되었다. 본 연구에서는 LabView 프로그램을 이용하여 졸음지표를 검출할 수 있는 신호처리 알고리즘을 적용시킨 뇌파측정 장치를 자체 개발하였다. 소수의 실험자를 대상으로 졸음유도 실험을 실시한 결과 알파파의 상대 파워스펙트럼 변화를 기준으로 졸음상태를 의미하는 뇌파의 패턴을 검출 할 수 있었다. 이후 기존의 뇌파측정 장비들을 사용하여 측정한 졸음패턴과 비교분석한 결과 유사한 패턴을 나타내는 것을 확인 할 수 있었다. 이러한 결과를 바탕으로 차후 운전자의 졸음예방 시스템에 활용한다면 졸음운전 사고로 인한 사망률을 낮추는데 기여할 수 있을 것으로 기대된다.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.183-190
• /
• 2012

PURPOSES : The fundamental diagram provides basic information necessary in the analysis of traffic flow and highway operation. When traffic flow is congested, the density-flow points in the fundamental diagram are widely scattered and move in a stochastic manner. This paper investigates the pattern of density-flow point transitions and identifies car-following behaviors underlying the density-flow transitions. METHODS : From a microscopic analysis of 722 fundamental diagrams of NGSIM data, a total of 20 transition patterns of fundamental diagrams are identified. Prominent features of the transition patterns are explained by the behavior of the leader and follower. RESULTS : It is found out that the average speed and the speed difference between the leader and the follower critically determine the density-flow transition pattern. The density-flow path is very sensitive to the values of vehicle speed and spacing especially at low speed and high density such that most fluctuations in the fundamental diagram in the congested regime is due to the noise of speed and spacing variations. CONCLUSIONS : The result of this study suggests that the average speed, the speed difference between the leader and the follower, and the random variations of speed and spacing are dominant factors that explain the transition patterns of a fundamental diagram.

• 융복합기술연구소 논문집
• /
• 제6권1호
• /
• pp.13-16
• /
• 2016

The purpose of this study is analysing the characteristics of vehicle fuel economy and greenhouse gase emissions according to driving pattern of drivers. Current fuel economy has not established on official test methods. The difference between actual fuel efficiency and specification fuel efficiency bring up consumer complaints and misunderstandings about fuel economy. Against this background, The country is progressing the study on influence of the fuel efficiency according to variety test conditions. This study analyze the driving pattern of the different drivers and influence of the fuel efficiency according to driving pattern of different drivers.

• 한국환경보건학회지
• /
• 제27권1호
• /
• pp.20-26
• /
• 2001

personal nitrogen dioxide(NO$_2$) exposures for 31 professional drivers were measured using passive sampler and time activity diary in Asan and Chunan area, and were estimated using time-weighted average model. Mean concentrations of driver’s indoor and outdoor were 24.7$\pm$10.7 ppb and 23.3$\pm$8.3 ppb, respectively with indoor/outdoor of 1.1. Mean personal NO$_2$ exposure was 30.3$\pm$9.7 ppb. Personal NO$_2$ exposures were strongly correlated with indoor car NO$_2$ levels ($R^2$=0.80) rather than residential indoor NO$_2$ level ($R^2$=0.55). and outdoor NO$_2$ level ($R^2$=0.50). The driver’s NO$_2$ exposure using LP-gas with 24.4$\pm$8.0 ppb were statistically different from those using diesel with 36.3$\pm$14.1 ppb(p<0.01). The effect of driver’s smoking for personal NO$_2$ exposure was not found. It was considered that the main NO$_2$in driver is transportation. Since drivers mostly spent their times in indoor and inside car, time-weighted average model could be used to estimated personal NO$_2$ exposure using time activity diary, Though we did not measure all microenvironments, the estimated personal NO$_2$ exposures with 26.9$\pm$10.2 ppb were statistically correlated with measured personal NO $_2$ exposures30.3$\pm$9.7 ppb ($R^2$=0.89). The mean and standard deviation of personal NO$_2$ exposure using Mote-Carlo simulation were 26.6$\pm$7.2 ppb.

• 한국운동역학회지
• /
• 제28권1호
• /
• pp.1-8
• /
• 2018

Objective: The purpose of this study is to investigate the differences in biomechanical variables of golf driving motion according to gender. Method: A total of 21 healthy golfers (11 men and 10 women) who have more than 5 years of professional experience and have been registered in the Korea Golf Association was recruited. A 250-Hz 8-camera motion capture system (MX-T20, Vicon, LA, USA) was used to capture the motion trajectories of a total of 42 reflective markers attached to the golfer's body and club. Moreover, two 1,000-Hz AMTI force plates (AMTI OR6-7-400, AMTI, MA, USA) were used to measure the ground reaction force. The mean and standard deviation for each parameter were then calculated for both groups of 21 subjects. SPSS Windows version 23.0 was used for statistical analysis. The independent t-test was used to determine the differences between groups. An alpha level of .05 was utilized in all tests. Results: There were differences in joint angles according to gender during golf driver swing. Men showed a statistically significantly higher peak joint angle and maximum range of angle in sagittal and frontal axis of the pelvis, hip, and knee. Moreover, women's swing of the pelvis and hips was found to have a pattern using the peak joint angle and range of angle in the vertical axis of the pelvis and hip. There were the differences in peak joint moment according to gender during golf driver swing. Men used higher joint moment in the downswing phase than women in the extensor, abductor, and external rotator muscles of the right hip; flexor and adductor muscles of left hip joint; and flexor and extensor muscles of the right knee. Conclusion: This result reveals that male golfers conducted driver swing using stronger force of the lower body and ground reaction force based on strength of hip and thigh than female golfers.

• 대한교통학회지
• /
• 제35권6호
• /
• pp.545-556
• /
• 2017

운전자 작업부하를 평가하기 위해 다양한 평가지표가 개발되어 활용되고 있으나, 기존의 작업부하 평가지표의 경우 개별 운전자의 운전습관과 주행패턴을 충분히 반영하지 못하고 있다. 또한, 운전자마다 체감하는 작업부하량과 작업부하를 극복하는 능력은 개인차가 있다. 따라서, 본 연구를 통해 개별 운전자의 주행패턴을 반영한 새로운 작업부하 평가지표를 도출하였다. 개별 운전자의 주행패턴을 반영하기 위해 운전자 별 Steering Velocity 절대값의 평균을 임계값으로 설정하고 임계값을 초과하는 영역의 Steering Velocity 면적의 합을 계량화한 ESA (Erratic Steering Velocity Area)를 제시하였다. 본 연구에서는 주행 시뮬레이션 실험을 통해 자율주행차가 비자율차와 혼재되어 주행하는 군집주행 환경을 구축하여 비자율차의 운전자가 군집주행 환경에서 어떠한 영향을 받는지를 ESA를 활용하여 평가하였다. 주행 시뮬레이션 실험을 통해 군집유무에 따른 일반 비자율차 운전자의 반응행태자료를 추출하여 NASA-Task Load Index (NASA-TLX) 점수와 운전자 작업부하 평가지표간의 관계를 분석하였다. 그 결과, 차로변경 시나리오에서는 다양한 운전자 작업부하 평가지표 중 ESA가 NASA-TLX 점수와 상관관계가 가장 큰 것으로 나타나 ESA의 유용성을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1405-1411
• /
• 2011

It is very often for the experienced diesel locomotive drivers to identify the proper replacing time for the fuel adjustment tube only based on their experience. Because of that, sometimes the locomotive's fuel is burned out due to the unnecessary torque. Or sometimes, the locomotive does not operate with its accelerating performance because the fuel is not supplied at the appropriate moment. Meanwhile, recent typical auto vehicles provide drivers with the average fuel efficiency and the instant fuel efficiency in real-time. By providing the real time display mentioned above, it is one of the good examples that those drivers, who had driven their cars not properly and used a lot of fuel with their bad driving habits, obtain the efficient driving pattern by continuous educating effect. Similarly, if the diesel locomotive provides the train driver with the optimal driving pattern within a certain driving section, it will be effective for fuel saving. It is possible to make the most effective driving pattern by performing the repeated trial running especially for the railway because the track's operating routes, its grades, and etc are relatively precise. This research analyzes the result data which was obtained by many times trial running on the identical section after equipping the fuel use measuring device to a certain test vehicle, and confirms the fuel saving effect depending on the driving pattern along the test section. At the same time, the research to establish the optimal driving pattern was progressed.

• 한국의류학회지
• /
• 제26권11호
• /
• pp.1514-1526
• /
• 2002

The objective of this study is to ascertain the major considerations when designing slacks for automobile drivers reflecting the elasticity of the human body posture. The scope of this study aims to find out the causes of discomfort in driving positions based on the results of a questionnaire survey and body measurements fur slacks, as well testing four types of experimental slacks for comfort and fitness when sitting on a driver's seat and in the standing position. Based on the results, a slacks design for drivers with improved comfort and fitness is suggested.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.431-436
• /
• 2002

Train driving should be satisfied to run fixed distance within given time, and it is desirable to minimize energy consumption. Minimizing energy consumption depends on the train operation modes by driver or automatic operation. In this article, an optimal operation to minimize energy consumption by changing modes of train operation by a driver is investigated. First, powering model, braking model and consumed energy calculation model are introduced by using Matlab software. The accuracy of the model established by simulation is compared with the real experimental data, which is obtained from an authorized institution. Second, several simulations under a variety of operations in the ideal track are executed, and then the optimal pattern of train driving is found.