• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.6 s.171
• /
• pp.55-60
• /
• 2005

This paper has been focused in developing of plastic lens with ultra-precision and low birefringence ability using by injection molding simulation tools. The simulation tools, $3D-Timon^{TM}\;and\;Asu-Mold^{TM}$ were applied to visualize indirectly the flow pattern of melted polymer enter the mould and the simulation results are verified as compared with the experimental results. Birefringence and polarized light generated in injection molding process was also calculated for each injection conditions and compared with .the pictures of experimented optical lens go through the polarized light plates device. A spherical radius of plastic optical lens transcribed from profile of mould core surface was measured to estimate the geometrical accuracy fer the each injection conditions. It is confirmed that the simulation results about flow pattern and polarized light area coincided in experimental results. It is known that increasing in thickness shrinkage at center of lens, the spherical radius is larger from comparing the graph measured spherical radius and the thickness shrinkage at center of lens

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.2 no.4
• /
• pp.293-297
• /
• 2021

The oriental stork (Ciconia boyciana) is listed as an endangered species internationally. Its resident population has been extirpated in South Korea since 1971. Its predicted historical habitat included forests (54%), rice paddy fields (28%), grasslands (17%), river-streams (less than 1%), and villages (less than 1%) based on pre-extirpation records in a previous study. However, habitat attributes of recently reintroduced oriental storks since 2015 remain unknown. To examine habitat use patterns and home ranges of recently reintroduced oriental storks, 2015-2017 tracking data of 17 individuals were used to analyze their spatial attributes with a Kernel Density Estimate method and breeding status. Their habitat use patterns from peripheral to core areas were highly associated with increasing rice paddy fields (26%) and decreasing forested areas (55%). Scale-dependent home ranges were 51% smaller for breeders than for non-breeders on average. Our study results highlight that the habitat use pattern of reintroduced oriental storks seems to be comparable to the historical pattern where the used area is likely to be more centralized for breeders than for non-breeders in South Korea. Furthermore, the direction of habitat management for oriental storks should focus on biodiversity improvement of rice paddy fields with chemical free cultivation and irrigation.

• Journal of Korean Society for Quality Management
• /
• v.50 no.1
• /
• pp.21-33
• /
• 2022

Purpose: As most defense technologies are classified as confidential, the corresponding International Patent Classifications (IPCs) require special attention. Consequently, the list of defense-related IPCs has been managed by the government. This paper aims to evaluate the defense-related IPCs and propose a methodology to revalidate and improve the IPC classification scheme. Methods: The patents in military technology and their corresponding IPCs during 2009~2020 were utilized in this paper. Prior to the analysis, patents are divided into private and public sectors. Social network analysis was used to analyze the convergence structure and central defense technology, and association rule mining analysis was used to analyze the convergence pattern. Results: While the public sector was highly cohesive, the private sector was characterized by easy convergence between technologies. In addition, narrow convergence was observed in the public sector, and wide convergence was observed in the private sector. As a result of analyzing the core technologies of defense technology, defense-related IPC candidates were identified. Conclusion: This paper presents a comprehensive perspective on the structure of convergence of defense technology and the pattern of convergence. It is also significant because it proposed a method for revising defense-related IPCs. The results of this study are expected to be used as guidelines for preparing amendments to the government's defense-related IPC.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.2
• /
• pp.115-125
• /
• 2013

In this research, a habitat model for Chinemys reevesii is suggested based on the components and variables of the Habitat Suitability Index which was determined through a series of literature researches, site surveys, and behavioral analysis. After reviewing the general habitat requirements, the site surveys(9 reservoirs) from July to December 2010, and the behavioral analysis of five Chinemys reevesii, the relationship between the behavioral and habitat use pattern was evaluated. According to the site surveys and behavioral analysis, the ecological core area(FK 50%) was about 0.96ha on average, the influence area(FK 90%) 4.22ha, and the home range was about $37.75{\pm}17.26m$ on average. As for the habitat use pattern of Chinemys reevesii, it travels through canals, and is influenced by the surrounding land uses. Also when there is a lack of food, the home range increases, and during hibernation, Chinemys reevesii prefers to be in an area within 1~2m range of water shores of fine textured soil and aquatic plants. After analyzing the information, the HSI standard was set and its components were determined as food, sunbathing and cover, aquatic environment, and spatial relationships. And the variables and the ranges of the components was determined as aquatic plant cover(0~49.81%), sandy area($3{\sim}13m^2$) and water velocity(0~60cm/s) etc. Lastly, plans and sections of the habitat model is provided designed according to the information from the researches, and problems to consider during habitat restoration was suggested in order to help understand about Chinemys reevesii habitat.

• Journal of the Economic Geographical Society of Korea
• /
• v.1 no.1
• /
• pp.33-56
• /
• 1998

This study examines the characteristics of service economies and their impacts on the spatial transformation of Korea during the last IS years. This study reviews the different perspectives for the tertiarization Process. It focuses on the spatial variation in the growth and location of Producer service industries. Based on the analyses of industrial and occupational compositions, services. particularly producer services, have played a major role in creating new job opportunities since the late 1980s. The ratio of services to merchandise trade is approximately 1:4, but service trades have increased since the early 1990s. Producer service activities have grown very rapidly, and the information processing service has been over-concentrated in Seoul. Further headquarters of bank and insurance services are overwhelmingly concentrated into Seoul. The firms whose headquarters are located in Seoul have linkage Pattern on a nationwide scale. The pattern of employment growth in producer services shows a clear core-Periphery disparity. In the light of the observed pattern of regional differentiation in producer service employment, some wider implications of the distribution of producer service activities for regional economic Performance are considered.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.343-345
• /
• 1998

By computer simulation, the pattern of magnetic field distribution on the Nb-foil of a rotating flux type superconducting power supply has been calculated. Using the results, the current pumping rate has been calculated and compared with the results obtained by the experiment. The experiment has been executed with small-size flux-rump in the environment of LN2 and LHe in order to compare the pattern of magnetic filed in the superconducting state and in the normal state. Five hall-sensor was located on the center, right side, left-side, upper side, lower side of the Nb-foil in order to obtain more accurate pattern of the magnetic field generated by rotating pole. In the simulation, the effects of the excitation-magnet and the iron core located at the inner-side and circumference of the magnet have been considered. By comparing the data from the experiment and the results from the simulation, the size of normal spot estimated. At the same time, by calculating the linkage flux, the current-pumping-rate has been obtained. Consequently, the results obtained from experiment and simulation coincided as expected.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.15-22
• /
• 2020

The 4th industrial revolution and the rapid change in the data environment revealed technical limitations in the existing relational database(RDB). As a new analysis method for unstructured data in all fields such as IDC/finance/insurance, interest in graph database(GDB) technology is increasing. The graph database is an efficient technique for expressing interlocked data and analyzing associations in a wide range of networks. This study extended the existing RDB to the GDB model and applied machine learning algorithms (pattern recognition, clustering, path distance, core extraction) to detect new abnormal signs. As a result of the performance analysis, it was confirmed that the performance of abnormal behavior(about 180 times or more) was greatly improved, and that it was possible to extract an abnormal symptom pattern after 5 steps that could not be analyzed by RDB.

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.149-154
• /
• 2007

Bragg reflecting waveguide devices have been fabricated on a flexible polymer substrate utilizing a post lift-off process which could Provide excellent uniformity of grating Patterns on Plastic film. The 510 m Period Bragg grating pattern is made by two methods. In the first sample the grating is fabricated by exposing the laser interference pattern on a photoresist, and then it is inscribed by $O_2$ plasma etching. The grating pattern of the second sample is formed by a PDMS soft mold imprinting process. The selective adhesion property of SU-8 material for Au and Si surfaces is utilized to prepare a 100-mm thick plastic substrate. Single mode waveguide is fabricated on the plastic substrate using polymer materials with refractive indices of 1.540 and 1.430 for the core and the cladding layers, respectively. The Bragg grating on Plastic substrate does not show any degradation in its spectral response compared to the reference sample made on a silicon wafer.

• The Plant Pathology Journal
• /
• v.35 no.4
• /
• pp.321-329
• /
• 2019

Ascochyta blight caused by Ascochyta rabiei (Pass.) Lab. (Telomorph: Didymella rabiei) (Kov.) is one of the most important fungal diseases in chickpea worldwide. Knowledge about pathogen aggressiveness and identification resistance sources to different pathotypes is very useful for proper decisions in breeding programs. In this study, virulence of 32 A. rabiei isolates from different part of Iran were analyzed on seven chickpea differentials and grouped into six races based on 0-9 rating scale and susceptibility/resistant pattern of chickpea differentials. The least and most frequent races were race V and race I, respectively. Race V and VI showed highly virulence on most of differential, while race I showed least aggressiveness. Resistance pattern of 165 chickpea genotypes also were tested against six different A. rabiei races. ANOVA analysis showed high significant difference for isolate, chickpea genotypes and their interactions. Overall $chickpea{\times}isolate$ (race) interactions, 259 resistance responses (disease severity ${\leq}4$) were identified. Resistance spectra of chickpea genotypes showed more resistance rate to race I (49.70%) and race III (35.15%), while there were no resistance genotypes to race VI. Cluster analysis based on disease severity rate, grouped chickpea genotypes into four distinct clusters. Interactions between isolates or races used in this study, showed the lack of a genotype with complete resistance. Our finding for virulence pattern of A. rabiei and newly identified resistance sources could be considerably important for integration of ascochyta blight resistance genes into chickpea breeding programs and proper decision in future for germplasm conservation and diseases management.

• Analyses & Alternatives
• /
• v.2 no.2
• /
• pp.93-110
• /
• 2018

Due to its speciality, Johannesburg has drawn wide attention from the international academia, which the existing urban theory cannot easily explain. This paper focuses on the spatial pattern of Johannesburg, and finds that it is highly fragmented: first North-South Division due to apartheid and gold mining, secondly, the continuous sprawl due to population densification, and thirdly formation of city-region due to the fill-in spatial policy. The fragmented spatial pattern undermines the social integration and weakens the potential economic sustainability, which make the balanced multi-core spatial pattern inevitable under the influence of the international planning thought. The Johannesburg's spatial transformation comes not only from social integration, but also from the development vison of world-class status of an African city. In reality, since the collapse of apartheid, the municipal government has released series of strategic planning in different executive phase. These different plannings unanimously focus on the world class status although since 2008, the social inclusiveness is more emphasized. Thus, Johannesburg implements some spatial policies, as promoting the corridor of freedom, identifying the key nodes in the city then developing with high density, implementing the in-filling policy, managing the urban growth boundary, effectively preserving the natural system. However, the industrial structure in Johannesburg is already quite high-ended which cannot produce many jobs and also require much investment in advanced infrastructure. Thus, the strategic goals of world-class status of an African city and social inclusiveness which really need widely shared public services to some extent are in tension. After evaluation, we can see that spatial transformation is quite limited. Obviously spatial transformation largely depends on the social-economy. The population is still in flow. In this sense Johannesburg must energetically support the employment-based industry, effectively control the spatial sprawl and carry out institutional innovation which further incentive investment, gradually build an integrated regional governance. In general, how Johannesburg combines globalization and its own condition is still worth thinking in both theory and practice.