• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2355-2364
• /
• 2012

Recently, the novel loop-up table(N-LUT) method to solve the tremendous memory problem of the conventional look-up table (LUT) method as well as to increase the generation speed of hologram patterns has been proposed. But, as the resolution of an input 3-D object is enhanced, the number of object points to be calculated for generation of its hologram pattern also increases, which results in a sharp increase of the computation time. Therefore, in this paper, a new approach for fast generation of the hologram pattern of 3-D object images is proposed by using the block redundancy feature of 3-D object images and the N-LUT method. Experimental results show that in the proposed method the number of object points and the overall computation time have been reduced by 43.3 % and 47.9 %, respectively compared to those of the conventional method for the case of the $5{\times}5$ block size. These good experimental results finally confirm the feasibility of the proposed method.

• Journal of Korea Foundry Society
• /
• v.24 no.5
• /
• pp.273-280
• /
• 2004

Vibrational motions of the compaction table were investigated to select the optimal operation conditions of sand filling and compaction for the EPC process. Their modes were measured at the nine points of the table with changing the relative rotation angles between the two eccentric mass vibrators which were attached parallel beneath the table. Well-defined vibration modes were measured at the center of the table but those of left and right sides of the table were distorted regardless of rotational angle differences. The distortion of vibration modes at both sides of the table were caused by the moment generated by offset positions of two eccentric masses. It was found that the uniform vibration modes would be gathered by controlling the relative distances between the rotating axis and the center of gravity in the compaction system at the various conditions of vibration modes and rotational angle differences.

• Korean Journal of Community Nutrition
• /
• v.19 no.3
• /
• pp.274-282
• /
• 2014

Objectives: The objective of this study was to revise the target pattern in food guidance system for adolescents' balanced menu planning. Methods: The food groups in the target pattern were divided into detailed food items, and intake number were assigned to each food items based on the revised standard food composition table. The validity of revised target pattern was examined. Menu planning according to the revised target pattern was made available to 305 male and female middle school students and the nutritional assessment of the menu plan were carried out using SPSS WIN 12.0. Results: The energy contents, energy contribution ratios of carbohydrate, fat, and protein, and 4 minerals' and 6 vitamins' contents of the revised target pattern were adequate. The average energy contents of the menu planned according to revised target pattern were 400~500 kcal higher than that of the revised target pattern when the revised standard food composition was applied. The energy contribution ratios of fat were 28.9%, close to maximum of acceptable macronutrient distribution range (AMDR) (30%), and that of carbohydrate were 54.5%, lower than minimum of AMDR (55%). The nutrient adequacy ratios (NARs) of calcium and vitamin C were less than 1.0. According to index of nutritional quality (INQ) of food items, kimchi, milk dairy products, and soybean curd were energy efficient source for calcium, kimchi, fruit, vegetable and seaweed were energy efficient source for vitamin C, with INQ of food items were higher or close to 2.0. Kimchi was the best energy efficient source of calcium and vitamin C. Conclusions: Revised target pattern based on the adolescent's foods intake was not good enough for balanced menu planning by adolescents, because what they ate and what they wanted to eat were very much different. Detailed guidance for food selection is necessary in each food items.

• Education of Primary School Mathematics
• /
• v.20 no.1
• /
• pp.53-68
• /
• 2017

Although the table, as one of the representations for helping mathematics understanding, steadily has been shown in the mathematics textbooks, there have been little studies that focus on the table and analyze how the table may be used in understanding students' functional thinking. This study investigated the elementary school 5th graders' abilities to design function tables. The results showed that about 75% of the students were able to create tables for themselves, which shaped horizontal and included information only from the problem contexts. And the students had more difficulties in solving geometric growing pattern problems than story problems. Building on these results, this paper is expected to provide implications of instructional directions of how to use the table as 'function table'.

• Journal of Oriental Neuropsychiatry
• /
• v.25 no.4
• /
• pp.371-382
• /
• 2014

Objectives: The purpose of this study is to examine the test-retest reliability and to suggest methods to enhance reliability. Methods: Participants consisted of 145 patients with generalized anxiety disorder who were diagnosed by the Structured Clinical Interview for DSM-IV Axis I Disorders. Participants were tested twice within one week. Results: The test-retest reliability of the Instrument of Pattern Identification for Jing Ji and Zheng Chong was examined in 145 patients and it was calculated as 0.3919. Internal Reliability of each part was calculated as 0.320~0.502. Reliability and concordance rate of symptoms are presented in the table. Frequency of symptoms and correlation between weight and frequency are also presented in the table. Conclusions: Based on these results, we have modified the Instrument of Pattern Identification for Jing Ji and Zheng Chong.

• Convergence Security Journal
• /
• v.9 no.4
• /
• pp.21-27
• /
• 2009

In the environment of development of network bandwidth and intrusion technology there is limit to the pattern analysis of all massed packets through the existing pattern matching method by the intrusion detection system. To detect the packets efficiently when they are received fragmented, it has been presented the matching method only the pattern of packets consisting with the operation system such as Esnort. Pattern matching performance is improved through the use of NMAP, the basic mechanism od Esnort, by scanning the operation system of the same network system and appling pattern match selectively scanned information and the same operation system as the received packets. However, it can be appeared the case of disregarding the receivied packets depending on the diversity of the kind of operation systems and recognition mistake of operation system of nmap. In this paper, we present and verify the improved intrusion detection system shortening the pattern matching time by the creation of hashy table through the pattern hash of intrusion detection system independently with the users system environment .in the state of flux.

• Journal of the Korea Furniture Society
• /
• v.24 no.1
• /
• pp.15-23
• /
• 2013

The form of the furniture developed variously according to the flow of the time. The Soban used in the modern living space is used as a decoration. but the furniture has to be used according to the form of the modern life and residential space. The furniture is the medium interacting with the surrounding environment in the residential space. I reconstruct the splendid fanciness of the pattern of the Haejuban and nature of structure and apply to the table design. The table gave the change of the form in order to be suitable for the residential space. and it raised the efficiency of the convenient of the custody and space utilization.

• Structural Engineering and Mechanics
• /
• v.52 no.3
• /
• pp.541-558
• /
• 2014

A 1/4-scale two-bay eight-storey reinforced concrete frame was tested on shaking table. Initial shaking table tests were carried out through a set of real seismic excitations to investigate the seismic behavior of the RC frame. Subsequently, the damaged frame was repaired using epoxy injection technique, and then subjected to the tests with the same records. The purpose of this study was to investigate experimentally the dynamic characteristics, cracking pattern and lateral inter-story stiffness of RC frames using epoxy injection technique. The test results indicate that epoxy-injection technique appears to be a satisfactory method for repairing earthquake-damaged structure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.3 s.28
• /
• pp.319-331
• /
• 1988

The purpose of this study was to develop a computer program for pattern making of women's Dooroomaky. The following results were given through utilizing the Computer in pattern making of Dooroomaky for women. 1. Computerization of the pattern making process was expected to provide higher accuracy and efficiency in pattern making. 2. Basic pattern was drafted by the hand-operation. In this study, this Dooroomaky basic pattern was selected. And a computer program for drafting was developed. Refer to