• Journal of the Korean Home Economics Association
• /
• v.20 no.3
• /
• pp.1-8
• /
• 1982

In this study, we attempted to make an original pattern of clothing for an abnormal type of figure, especially for the type of kyphosis. We measured the curvature of the spine of a woman with kyphosis with a Martin measuring instrument and a silhouetter in the following ways. First, we counted the rate of shrinkage of the standard lines drawn on the surface of the body according as the body moved. Secondly, placing the front and back darts, the front and back shoulder darts and the side darts according to“Munhwa”pattern, we made cubic cuttings of four moving postures as well as the standing one. Thirdly, we superposed the developed patterns of the standing and the moving postures, measuring the position change and the amount to the change of the darts, and compared them. The results are as follows: 1) In the developed pattern of a cubic cutting of the basic pattern and the standing posture, the neckhole became larger than that of the basic pattern, and the waist line was lowered than that of the basic pattern because the center back line was shortened due to the curved backbone.

• The Research Journal of the Costume Culture
• /
• v.18 no.4
• /
• pp.755-773
• /
• 2010

The purpose of the study was to examine concept of subculture and style of subculture by each age and to analyze internal meaning of hairstyle in subculture. The study carried out literary review on the basis of books related to subculture and hairstyle focused on the cradle of subculture and preceding researches of subculture style, and strived to find internal meaning of hairstyle by describing in-depth descriptive methods of qualitative research. And the study limited its range in the hairstyle in style of subculture from 1930s to early 1990s commonly described in subculture related books. As a result, there were natural pattern, cutting pattern, exaggerated pattern, set pattern, braid pattern, color pattern and addition pattern in types of hairstyle in subculture. The hairstyle in subculture symbolizes their internal value and ideology and hairstyle is a kind of language to express identity of subculture.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.55-59
• /
• 2007

Technologies of super-precision micro pattern mold machining and high-performance optical films manufacturing using thereof forms the basis of recent display industries which have developed remarkably. Especially, it is the light guide plates and high luminous intensity prism sheets at BLU or FLU in LCD and lenses at virtual keyboard's display to be manufactured by micro machining technology. One way the industry requires to do that is by developing high-performance light guide plates or films which are existing light guide plates, diffusion films and luminance enhancement prism films all in one. In this research effort, basic processing of the micro pyramid structure by shaping method is proposed. Experiments of mold machining of pitch $20{\mu}m$ tetrahedral pyramid and pitch $100{\mu}m$ trihedral pyramid using a $90^{\circ}$ diamond tool were conducted to identify a variety of machining features, such as cutting forces, conditions of the surface, shapes of chips, and influence of materials.

• Transactions of Materials Processing
• /
• v.18 no.2
• /
• pp.107-111
• /
• 2009

Temperature variation happens in micro prism roll mold processing system during machining the prism pattern roll mold using manufacturing optical films of LCD (liquid crystal display). This temperature variation induces pitch errors of the prism patterns. The temperature variation displaces the positions of the diamond cutting tool on the roll which was coated by the copper. In order to prevent the pitch errors, the stabilizing the temperature of machining environment is needed. Therefore, the researching on the temperature variation of the ultra-precision roll mold processing system on the machining of micro prism rot 1 mold is needed. In this paper, the temperature variation of micro prism roll mold processing system is researched, the influence is analyzed, and the study for reducing the pitch errors carried out.

• Journal of the Korean Society of Costume
• /
• v.58 no.7
• /
• pp.31-42
• /
• 2008

The fashion of the 19C had been through many diverse styles, i.e. Empire style, Romantic style, Crinoline style and the Bustle style. These styles had emphasized a certain figures, such as exaggerated hourglass silhouette of crinoline style or S silhouette of bustle style. Following the trends, corsets became more than underwears. Actually they supported the fashion of the 19C. Apparently, the corsets had been evolved in many aspects. Patterns, materials and trimmings were developed and refined to make torso figures desirable. The initial purpose of the research is to find out how they developed corset patterns to make such a diverse figures, so that the techniques can be adopted in contemporary pattern design. The 16 corsets and their patterns were quoted from books related the subject. The patterns were redrawn of same scale for the comparative study concerning cutting lines and measurements. Coming to the late, more curved lines and more segmented cutting were used to make body more of glamour and natural. Gussets were another key technique to make them work. Various sized and shaped gussets were used to follow the trends of ever changing.

• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.595-606
• /
• 2020

This study develops an optimal two-dimensional (2D) pattern from three-dimensional human scan data by considering the cycling posture and dermatome of high school male cyclists. By analyzing the body surface change in the cycling posture and considering the dermatome of the lower limbs, the optimal cutting line setting and the development of cycling tights for individual cyclists were presented to provide data that could be used in the clothing industry. We designed three cycling tights to solve the size unsuitability. 3D design 1 is a non-extension design based on the analysis of the 3D human body scan data, in which parts were connected diagonally from the front of the knee to the back of the knee. 3D design 2 removed both the front and back to reduce air resistance during cycling. 3D design 3 did not have a cutting line on the front panel because of the air resistance during cycling in the front area. We analyzed the garment pressure for 8 points of lower body and performed a subjective evaluation of the 3D designed tights and the current cycling tights. The 3D design 1 in this study was well received in the omphalion, thigh, and hip area, while 3D design 3 was well received in the omphalion, thigh, hip, and bottom bands. Therefore, the LoNE of 3D design 1 was applied to the front, and the hip cutting line of 3D design 3 was applied to the back.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.363-370
• /
• 2015

Objective : The purpose of this study was to give the basic data for the cutting movement with the various angels on the poly urethane. Method : Ten healthy men voluntarily participated in this study. A three-dimensional motion analysis system (VICON) and force plates were used to analyze the movements of the joints for the lower extremities. For the statistical analysis the IBM SPSS 21.0 was used to perform repeated measured ANOVA and post-hoc comparison result was used to perform the Scheffe and the level of significance was set up at ${\alpha}=.05$. Results : There were significant differences for the time required for the increasing angles of the cutting movement(p<.05). In addition, there were significant differences for the maximum dorsiflexion, plantarflexion of ankle joint, maximum flexion of knee joint and hip joint with the increasing the angles of cutting movement(p<.05). Also, there were significant differences for the maximum adduction and abduction angle of the hip joint with the increasing of the angles of cutting movement. There was signigicant difference for the resultant utilized coefficient of friction(RuCOF) for the increasing angles of cutting movement(p<.05). Conclusion : There was a pattern to increase the coefficient friction with the angle of cutting direction. Also, it would be possible to use the poly urethane for the outdoor floor with the results of this study.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.2
• /
• pp.89-96
• /
• 2001

Carbohydrate and soluble protein reserves and regrowth characteristics in response to cutting height were investigated over four regrowth cycles of turf-type perennial ryegrass(Lolium perenne L. cv. preludeII). When the plants were at the full-vegetative stage (twelve weeks-old), three sequential defoliations at 3, 6 and 9 cm above the root base were imposed at 2-week intervals. Shoot dry weight in all three treatments continuously decreased with progressing regrowth cycle and the decreasing rate was higher as cutting height was lowered. TNC (total non-structural carbohydrate) in stubble at the end of the fourth regrowth cycle in 3, 6 and 9 cm cutting height decreased by 98%, 82% and 27%, respectively, comparing the initial content. TNC in roots also largely decreased with similar pattern in response to cutting height, whereas the absolute amount was much less compared to stubble. Soluble protein in stubble in 3, 6 and 9 cm cutting height decreased by 98%, 82% and 57%, respectively, at the end of fourth regrowth. A significant correlations between TNC (r=0.906) or protein (r=0.879) at the fourth defoliation and dry weight of regrowing shoots at the end of fourth regrowth were observed. these results indicated that cutting height closely influences the levels of organic reserves available for new growth, and that the levels of reserves might provide a useful tool as a determinant for regrowth dynamics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3066-3073
• /
• 2009

Joint paths of master and branch pipes are induced mathematically for many kinds of joint patterns between both pipes in 3-axis pipe profile-cutting machines. By compensating them with a kerf width, the real cutting paths are determined, and their CL-data are generated, and the tool paths generated by CL-data are verified by a ghost function. A bevelling of welds is implemented through tilting a cutting torch in the $\beta$-axis direction for 8 sections in the chuck rotation of $\alpha$-axis. A PLC controls simultaneously position and velocity in a real time for $\alpha$, X, $\beta$-axis by loading CL-data generated. We developed the PLC-controlled 3-axis pipe profile-cutting system which can cut a master or branch pipe along the cutting path and simultaneously do a bevelling process.

• Tunnel and Underground Space
• /
• v.23 no.3
• /
• pp.180-191
• /
• 2013

The purpose of this research was to find an optimal quarrying for marble by analyzing the applicability and the work efficiency of a chain saw machine newly introduced in the underground Baekwoon mine. From the test results of the physical properties of Baekwoon marble, which affects the efficiency of rock cutting, it was found to have similar physical characteristics as the ones which are now being produced in the other areas in Korea. And especially it shows isotropic property, which can be thought to be advantageous as a dimensional stone. To check the long-term quality of the marble as a stone material, several tests such as corrosion resistance test and abrasion test were carried out. It was found to be vulnerable to acid rain with decrease of weight and seismic wave velocity after applying artificial rain at pH 5.6 for 50 times. The percentage of wear from abrasion test was 22.67%. The working time and cutting speed of the chain saw machine were recorded and analyzed during the test-run at the quarry. The overall work cycle was assorted into 9 unit operations and the operating time per each unit was drawn. The operating times for the two cutting patterns, which could be possibly applicable to the work site, were compared. The results indicated that the pattern B, that the cutting sequence was set to minimize the movement of the machine, showed 6% less working hours than the pattern A, which first cuts the outer boundary. With cutting pattern analysis, the ore body in the Baekwoon mine was 3 dimensionally modeled and a quarrying plan considering the existing conditions of the marble was suggested.