• Journal of Family Resource Management and Policy Review
• /
• v.25 no.2
• /
• pp.53-78
• /
• 2021

The concept of household labor is composed of housework and family care, and it provides a framework for understanding daily life from the perspective of work-life balance. The purpose of this study was to investigate the household labor time of Korean adults by gender and generation over the last 20 years. Data was taken from the five Statistics Korea Life Time Surveys from 1999 (t1) to 2019 (t5) (n=69,196). The major results are as follows: first, gender and generation were found to have a significant relationship with household labor time over the study period. Household labor time for females was 3.8 times that of males in 1999, but females' household labor time decreased over the next 20 years while males' increased, including both housework and family care. The female participation rate in household work also remained steady, while that for males increased. Second, in the younger and middle generations, a similar gender and generational pattern was seen. Third, in the older generation, household time and participation rates for both females and males increased. The family welfare policy and theoretical implications of these results are discussed.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.959-974
• /
• 2021

Forel-Ule Index (FUI) is an index which classifies the colors of inland and seawater exist in nature into 21 gradesranging from indigo blue to cola brown. FUI has been analyzed in connection with the eutrophication, water quality, and light characteristics of water systems in many studies, and the possibility as a new water quality index which simultaneously contains optical information of water quality parameters has been suggested. In thisstudy, Ocean Colour-Climate Change Initiative (OC-CCI) based 4 km FUI was spatially downscaled to the resolution of 500 m using the Geostationary Ocean Color Imager (GOCI) data and Random Forest (RF) machine learning. Then, the RF-derived FUI was examined in terms of its correlation with various water quality parameters measured in coastal areas and its spatial distribution and seasonal characteristics. The results showed that the RF-derived FUI resulted in higher accuracy (Coefficient of Determination (R²)=0.81, Root Mean Square Error (RMSE)=0.7784) than GOCI-derived FUI estimated by Pitarch's OC-CCI FUI algorithm (R²=0.72, RMSE=0.9708). RF-derived FUI showed a high correlation with five water quality parameters including Total Nitrogen, Total Phosphorus, Chlorophyll-a, Total Suspended Solids, Transparency with the correlation coefficients of 0.87, 0.88, 0.97, 0.65, and -0.98, respectively. The temporal pattern of the RF-derived FUI well reflected the physical relationship with various water quality parameters with a strong seasonality. The research findingssuggested the potential of the high resolution FUI in coastal water quality management in the Korean Peninsula.

• Korean Journal of Environment and Ecology
• /
• v.35 no.5
• /
• pp.525-547
• /
• 2021

The main purpose of this study is to examine the use of plant species in ecological restoration projects. To this end, planting drawings from 58 sites that had completed the return of the ecosystem conservation cooperation fund for the past six years were collected and analyzed. The analysis used the construction completion and design drawings to determine the overall selection status and analyze frequency by classifying planted plants into wild and cultivated plants by nature, size, vegetation climate, and upland and wetland habitat. The investigation and analysis process found many cases of wrong plant names, so an analysis was also performed on the matter. In the 58 investigation sites, 282 plants were used for planting: 91 tree species, 69 shrub species, 11 vine species, and 111 herbal species. The most commonly used plant species was Spiraea prunifolia f. simpliciflora, followed by Sorbus alnifolia, Quercus acutissima, Zoysia japonica, Callicarpa dichotoma, and Weigela subsessilisin that order. The most commonly used tree species was Sorbus alnifolia,followed by Quercus acutissima, Zelkova serrata, Chionanthus retusus, and Cornus officinalis, in that order. The most commonly used shrub species was Spiraea prunifolia f. simpliciflora, followed by Weigela subsessilis, Callicarpa dichotoma, Rhododendron yedoense f. poukhanense. and Euonymus alatusin that order. The most commonly used herbal plant species was Zoysia japonica, followed by Dendranthema zawadskii var. latilobum, Aster koraiensis, Miscanthus sacchariflorus, and Pennisetum alopecuroidesin that order. In the analysis by vegetation climate, Spiraea prunifolia f. simpliciflora, Callicarpa dichotoma, and Sorbus alnifoliawere most used in that order in both the temperate central and the warm temperate forest zones, but the pattern does not properly reflect the climate characteristics. In the analysis by habitat, Miscanthus sacchariflorus and Lythrum salicariawere most used in the wetland. In particular, the ratio of wild plants to cultivated plants was 76% to 24%, indicating the ratio of selecting cultivated plants was high. The names of plants on the drawings were mostly common names that did not appear in the Korea National Arboretum or the National Species List of Korea. It is necessary to use proper plant names in the future. Regarding the use of planting plants for ecological restoration, it is necessary to adopt the approach of diversifying selected plants, selecting plants according to characteristics of climate zones, and lowering the specifications of plants used for ecological restoration. Moreover, it is important to fully understand the ecological characteristics of wetland plants and minimize the ratio of using cultivated plants to ensure the plant selection centered on wild plants.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.3
• /
• pp.130-137
• /
• 2021

Purpose: The various suture techniques can be utilized in order to maximize the keratinized tissue healing around dental implants. The aim of this study is to compare the soft tissue healing pattern between two different suture techniques after implant placement. Materials and Methods: 15 patients with 18 implants were enrolled in this study. Simple implant placement without any additional bone graft was performed. Two different suture techniques were used to tug in the mobilized flap near the healing abutment after paramarginal flap design. Digital intraoral scan was performed at baseline, post-operation, stitch out, and 3 months after operation. The scan data were aligned using multiple points such as cusp, fossa of adjacent teeth, and/or healing abutment. After subtracting scan data at baseline with other time-point results, closed space indicating volume increment of peri-implant mucosa was selected. The volume of the close space was measured in mm³. The volume between two suture techniques at three time-points was compared using nonparametric rank-based analysis. Results: Healing was uneventful in both groups. Both suture technique groups showed increased soft tissue volume immediately after surgery. The amount of volume increment significantly decreased after 3 months (P < 0.001). Flap folding suture group showed higher median of volume increment than interrupted suture group after 3 months without any statistical significance (P > 0.05). Conclusion: After paramarginal flap reflection, the raised flaps stabilized by flap folding suture showed relatively higher volume maintenance after 3-month healing period. However, further studies are warranted.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.291-298
• /
• 2021

Purpose. The purpose of this study is to compare five interdental cleansing products' effectiveness on removing artificial dental plaque on the interdental space of zirconia crowns. Materials and methods. A model with abutments on the right mandibular second premolar and first molar were prepared. 10 zirconia crowns for each abutment were fabricated. After applying artificial dental plaque between the zirconia crowns, a single clinician attempted to remove the plaque with five products: interdental toothbrush, end-tuft toothbrush, dental floss, Easypick, Water pik. They were conducted 10 times per group. The aspect and area of removed surfaces were analyzed using images taken with a digital camera. One factor analysis of variance was performed as a statistical analysis, and a post-hoc test was performed using the Scheffé method (P < .05). Results. There were differences in the area and the pattern according to the characteristics of the products. The largest area, including the marginal portion, was removed in the dental floss group. Interdental toothbrush group was the most effective in removing the dental plaque at the marginal portion. Easypick was less effective than the interdental toothbrush. The end-tuft toothbrush showed better results than other products in cleansing mesiobuccal and distobuccal area, but could not cleanse the area directly below the contact point. In Water pik group, artificial dental plaque was scarcely removed. The removal rate of artificial dental plaque was in the order of floss (69.47%), end-tuft toothbrush (49.36%), interdental toothbrush (44.20%), Easy pick (13.04%), and Water pik (0.59%). Conclusion. Dental floss showed the highest removal rate in the interdental space restored with zirconia crowns, while interdental toothbrush was the most effective in removing the dental plaque at the marginal portion.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.265-271
• /
• 2021

The pattern of the tree's internal swelling depends on many causes. Since it is difficult to detect these various causes of swelling with a general method, if the state of swelling for a long time cannot be confirmed, serious damage to the trees may occur due to enlargement of the swelling area. In the method of acquiring a tree tomography image, an impulse passing through the tree is generated by tapping the sensor with a rubber mallet, and the moving speed is recorded. In this paper, to measure cracks, cavities, and swelling due to physical damage, we developed a 3D viewer that can know the internal state of a tree using a tree cross-section image acquired from Arbotom to determine the degree of swelling inside the tree. Based on this, we tried to present data that can be referred to when surgical operation of trees is required. In order to acquire a tomographic image of a tree, 6 sensors were attached to the three Yangpala and Maple trees, and a 1 m-long tree was measured using the Arbotom program, and a 3D image was implemented through the 3D Viewer created using MATLAB. In addition to simply acquiring images, the cross-sectional length and volume of the tree were measured. In the actually produced 3D Viewer, the length of the part where the swelling of the maple tree occurred was 33.12 cm, and the swelling of the yangpala tree was measured as 21.41 cm. The volume of the maple tree was measured to be 78.832 ㎤. As a result of comparing the cross-sectional image of the Arbotom and the 3D image, the same result as the real aspect of the tree was obtained, so it can be judged that the reliability of the manufactured software is also secured, and data to be applied to the surgical tree operation through the created Viewer is provided. It is believed that the damage will be minimized.

• Korean Journal of Cognitive Science
• /
• v.32 no.1
• /
• pp.1-53
• /
• 2021

The aim of this study was to analyze word frequency effects on eye fixation duration in Korean reading with a one-boundary diffusion model and to show how these phenomena differ between adults (20-28yrs) and adolescents (13-14yrs). We predicted that the drift rate parameter in the boundary diffusion model would reflect the information processing of the fovea during silent reading. Through an eye movement tracking experiment while controlling word properties such as the word frequency and the age of acquisition, Experiment 1 and Experiment 2 show that the information processing pertaining to words to be placed in the fovea is connected to the drift rate of the one-boundary diffusion model parameters. In Experiment 1,in the adult group, the mean difference in the fixation time in the response proportion between the presence of high-frequency condition and low-frequency condition in the adult group was higher in quantile 0.9 than it was in the 0.1 quantile, but in the adolescent group, the mean difference in the fixation time in the response proportion between the two conditions was not significantly in the 0.9 quartile.In Experiment 2, the mean difference in the fixation time in the response proportion between early-acquired condition and late-acquired condition in both groups was also higher in the quantile 0.9 than in the 0.1 quantile. The distribution of the two conditions in the both groups was positively skewed, and the difference showed the same pattern found in the results of Ratcliff(Ratcliff & McKoon, 2008). Based on the experimental results, we propose one-boundary diffusion model as a tool to explain word property effects and individual differences in reading. In particular, we suggest that the drift rate parameter in the boundary diffusion model reflects the information processing of the fovea during reading. In addition, the results show that one-boundary diffusion model can be used to predict the aforementioned phenomena in reading.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.22-35
• /
• 2021

Recently, as the climate changes rapidly and the prevalence of airborne fine particulate matter increases, the pattern of pollutants in the atmospheric environment is also changing. Therefore, the importance of studying the stability of pigments used in colored cultural properties is emerging. Hoecheong is an inorganic blue glass pigment called smalt; it is made by using cobalt as a coloring element in potash glass, and was widely used in colored cultural assets, such as murals and paintings. In this study, we collected three other hoecheong pigments to analyze their properties. The percentage of Co and K contained are different according to the manufacturer, and the smalt-3 sample has a lower cobalt content (15.1 wt.%) and higher potassium content (29.6 wt.%). After this analysis, colored specimens were prepared. Prepared specimens were exposed to ultra-violet rays, CO₂/NO₂, and NaCl, which are known to have the greatest influence on the stability of pigments. We found that factors affecting the color stability were NO₂ gas, ultra-violet rays, and water-soluble salts (NaCl). Among them, NO₂ has the most severe impact on color change of the pigments. Results of the component analysis showed that the color change depends on the potassium and cobalt content of the hoecheong pigment. Among the specimens, smalt-3 showed the most vulnerability after exposure to NO₂ gas and water-soluble salts. Pigment film stability is affected by watersoluble salts, giving rise not only to color change, but also weakening the physical properties of the film. However, there was no significant change in composition and color after exposure to CO₂ gas. In conclusion, we found that hoecheong pigments underwent color change and increased instability of the coating film when exposed to any of the atmospheric environmental factors used in this study, except for CO₂.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.223-232
• /
• 2021

In general, stormwater flows to the road surface, especially in urban areas, and it is discharged through the drainage grate inlets on roads. The appropriate evaluation of the road drainage capacity is essential not only in the design of roads and inlets but also in the design of sewer systems. However, the method of road surface flow analysis that reflects the topographical and hydraulic conditions might not be fully developed. Therefore, the enhanced method of road surface flow analysis should be presented by investigating the existing analysis method such as the flow analysis module (uniform; varied) and the flow travel time (critical; fixed). In this study, the algorithm based on varied and uniform flow analysis was developed to analyze the flow pattern of road surface. The numerical analysis applied the uniform and varied flow analysis module and travel time as parameters were conducted to estimate the characteristics of rainfall-runoff in various road conditions using the developed algorithm. The width of the road (two-lane (6 m)) and the slope of the road (longitudinal slope of road 1 - 10%, transverse slope of road 2%, and transverse slope of gutter 2 - 10%) was considered. In addition, the flow of the road surface is collected from the gutter along the road slope and drained through the gutter in the downstream part, and the width of the gutter was selected to be 0.5 m. The simulation results were revealed that the runoff characteristics were affected by the road slope conditions, and it was found that the varied flow analysis module adequately reflected the gutter flow which is changed along the downstream caused by collecting of road surface flow at the gutter. The varied flow analysis module simulated 11.80% longer flow travel time on average (max. 23.66%) and 4.73% larger total road surface discharge on average (max. 9.50%) than the uniform flow analysis module. In order to accurately estimate the amount of runoff from the road, it was appropriate to perform flow analysis by applying the critical duration and the varied flow analysis module. The developed algorithm was expected to be able to be used in the design of road drainage because it was accurately simulated the runoff characteristics on the road surface.

• Journal of Bio-Environment Control
• /
• v.30 no.3
• /
• pp.230-236
• /
• 2021

Changes in greenhouse temperature and solar radiation due to fogging and shading were monitored during hydroponics in high temperature in summer season. Experiment 1 consists of four treatments, namely, Control, Shading, Fogging, and Fogging + Shading based on sunny days August. For Experiment 2, two melon cultivars of 'Dalgona' and 'Sopoong gaza' were cultivated in summer of 2020 using Fogging + Shading with the best result for temperature reduction effect from Experiment 1. As a result of Experiment 1, the effect of Fogging + Shading on temperature reduction was apparent where the inside was about 4℃ (as the lowest temperature) lower than the outside. Fogging + Shading showed the inside was 2-4℃ lower than the outside, and Fogging or Shading treatments had little difference, compared to the Control where the internal temperature of greenhouse was 3-4℃ higher than the external. For solar radiation changes between greenhouse inside and outside, the internal change was in a similar pattern between Fogging and Control, and between Shading and Fogging + Shading, respectively. In case of the Fogging treatment (similar with the Control) only the effect of solar radiation reduction as influenced by plastic greenhouse covering materials was examined. The Fogging + Shading had a very similar change in solar radiation to the Shading. Based on these results, Experiment 2 was conducted in summer of 2020 and resulted in a temperature reduction effect of about 3.9℃ according as the inside of air-conditioned greenhouse was kept 32.4℃ when the maximum temperature of the outside reached 36.3℃ in August during the cultivation period. In addition, the quality of melon fruit was good (1.3-1.5 kg of fruit weight, 12.6-13.3 of soluble solids content. In the case of using Fogging + Shading cooling treatment, it can bring about the effect of reducing the temperature during the high temperature in summer, and normal growth of melon and fruit harvesting were possible.