• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.520-522
• /
• 2004

In this paper, we propose the algorithm of path planning and obstacle avoidance for mobile robot. We call the proposed method Random Access Sequence(RAS) method. In the proposed method, a small region is set first and numbers are assigned to its neighbors, then the path is selected using these numbers. It has an advantage of fast planning and simple operation. This means that new path selection may be possible within short time and that helps a robot to avoid obstacle in any direction. When a robot meets moving obstacles, it avoids obstacles in a random direction. Sonar ranger is useful to get obstacle information and RAS may be a good solution for path planning.

• 한국경영과학회지
• /
• 제23권4호
• /
• pp.11-20
• /
• 1998

This paper deals with a mathematical model and an algorithm for the problem of determining k most vital arcs in the shortest path problem. First, we propose a 0-1 integer programming model for finding k most vital arcs in shortest path problem given the ordered set of paths with cardinality q. Next, we also propose an algorithm for finding k most vital arcs ln the shortest path problem which uses the 0-1 Integer programming model and shortest path algorithm and maximum flow algorithms repeatedly Malik et al. proposed a non-polynomial algorithm to solve the problem, but their algorithm was contradicted by Bar-Noy et al. with a counter example to the algorithm in 1995. But using our algorithm. the exact solution can be found differently from the algorithm of Malik et al.

• Management Science and Financial Engineering
• /
• 제11권2호
• /
• pp.85-103
• /
• 2005

In this paper, we consider the routing and wavelength assignment problem in survivable WDM transport network without wavelength conversion. We assume the single-link failure and a path protection scheme in optical layer. When a physical network and a set of working paths are given, the problem is to select a link-disjoint protection path for each working path and assign a wavelength for each working and protection path. We give an integer programming formulation of the problem and propose an algorithm to solve it. Though the formulation has exponentially many variables, we solve the linear programming relaxation of it by using column generation technique. We devise a branch-and price algorithm to solve the column generation problem. After solving the linear programming relaxation, we apply a variable fixing procedure combined with the column generation to get an integral solution. We test the proposed algorithm on some randomly generated data and test results show that the algorithm gives very good solutions.

• 한국멀티미디어학회논문지
• /
• 제21권4호
• /
• pp.535-544
• /
• 2018

Developing a new texture path tool is crucial in 3D industries to automatically manage and set up texture paths for characters and environment modelings. For a better study, I compare the problems, methods and functions of the new tool(SongRepath tool) with other commonly used tools such as File Path Editor, Genie, He Texture Path. Next, I analyze the top down method system for these commonly used tools, and create a new bottom-up algorithm for a better use and efficiency. Finally, analyzing and comparing SongRepath tool with other tools in terms of operation in convenience, steps for results, checking number of Texture files, checking the numbers of new paths, checking the numbers of files not found, checking the numbers of path not changed, errors or problems, and availability of cancelation while proceeding the result. As a result, this study shows that SongRepath tool has less errors and saves more time on the processing works.

• 한국시뮬레이션학회논문지
• /
• 제12권1호
• /
• pp.11-19
• /
• 2003

Dubins showed that any shortest path of a car-like robot consists of exactly three path segment which are either arcs of circles of radius r(denoted C), or straight line segments(denoted S). Possible six types classified into two families, i.e. CSC and CCC. CSC includes 2 types(LRL and RLR) and CSC includes 4 types(LSL, RSR, LSR, RSL). This paper proposes new formulae for CSC family to find the shortest smooth path between the initial and final configurations of a car-like robot. The formulae is used for finding connection points explicitly between C\longrightarrowS and S\longrightarrowC which are necessary for real applications. The formulae have simple forms mainly because they are transformed into origin of their original coordinates of initial and target configuration, and derived from a standard forms which are a representative configuration of LSL and LSR type respectively. The proposed formulae, which are derived from the standard forms, are simple and new method.

• Journal of Computational Design and Engineering
• /
• 제3권2호
• /
• pp.132-139
• /
• 2016

In this paper, a minimum time path planning strategy is proposed for multi points manufacturing problems in drilling/spot welding tasks. By optimizing the travelling schedule of the set points and the detailed transfer path between points, the minimum time manufacturing task is realized under fully utilizing the dynamic performance of robotic manipulator. According to the start-stop movement in drilling/spot welding task, the path planning problem can be converted into a traveling salesman problem (TSP) and a series of point to point minimum time transfer path planning problems. Cubic Hermite interpolation polynomial is used to parameterize the transfer path and then the path parameters are optimized to obtain minimum point to point transfer time. A new TSP with minimum time index is constructed by using point-point transfer time as the TSP parameter. The classical genetic algorithm (GA) is applied to obtain the optimal travelling schedule. Several minimum time drilling tasks of a 3-DOF robotic manipulator are used as examples to demonstrate the effectiveness of the proposed approach.

• 대한의용생체공학회:의공학회지
• /
• 제24권2호
• /
• pp.77-82
• /
• 2003

삼차원 CT 영상을 이용하여 대장 내부의 병변을 관찰하고 진단하기 위한 비침습적 검사 방법인 가상 대장 내시경을 위하여 가상 카메라의 관찰점과 관찰 방향을 제공하기 위한 적절한 경로가 필요하다. 특히. 인간의 대장은 매우 길고 복잡하므로 사용자가 직접 경로를 생성하려면 많은 시간이 걸리고 정확한 결과를 기대하기 어렵다. 또한 경로를 자동으로 생성하는 기존의 방법들은 계산량이 많아 약 수 분에서 수 십분 이상의 수행 시간이 걸리고. 사람의 대장이 가지는 대표적인 구조인 두께가 급격히 변하거나 곡률이 큰 영역에서 적절한 중앙선을 얻기 어려우며. 끊김이 있는 부적절한 경로를 생성하고, 평활화된 경로가 대상체의 표면과 충돌할 가능성을 배제할 수 없다. 이 논문에서는 계산량이 적은 거리 지도 및 제안된 순서 지도를 이용하여 끊김이 없고 적절한 중앙선을 얻는 고속의 알고리즘을 제안한다 순서 지도는 대상체 내부의 각 복셀에서의 가능한 경로의 방향을 나타내며 거리 지도는 대상체 내부의 각 복셀과 가장 가까운 배경 복셀까지의 거리를 나타낸다. 제안한 방법에서는 두 지도들을 이용하여 끝점에서 출발하여 시작점을 향하는 동시에 더욱 넓은 영역으로 진행하는 경로를 얻으므로, 대상체의 두께와 곡률의 크기에 관계없이 적절한 중앙선을 얻을 수 있다. 이와 함께 경로의 충돌 가능성을 완전히 제거할 수 있는 간단한 평활화 방법을 제안한다 알고리즘의 적절성을 검증하기 위해 사람의 대장의 특징을 가진 팬텀(phantom) 데이터를 이용하여 실험하였다. 사람의 대장 CT 데이터를 이용하여 800MHz PC에서 1분 이내에 적절한 경로를 얻었으며 이를 따라 이동하는 가상의 카메라로부터 만족할만한 가상 대장 내시경 영상을 얻을 수 있음을 보였다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2000년도 추계학술대회 및 정기총회
• /
• pp.113-116
• /
• 2000

The purpose of this study is to present a method for determining the k most vital arcs in shortest path problem using an evolutionary algorithm. The problem of finding the k most vital arcs in shortest path problem is to find a set of k arcs whose simultaneous removal from the network causes the greatest increase in the total length of shortest path. The problem determining the k most vital arcs in shortest path problem has known as NP-hard. Therefore, in order to deal with the problem of real world the heuristic algorithm is needed. In this study we propose to the method of finding the k-MVA in shortest path problem using an evolutionary algorithm which known as the most efficient algorithm among heuristics. For this, the expression method of individuals compatible with the characteristics of shortest path problem, the parameter values of constitution gene, size of the initial population, crossover rate and mutation rate etc. are specified and then the effective genetic algorithm will be proposed. The method presented in this study is developed using the library of the evolutionary algorithm framework (EAF) and then the performance of algorithm is analyzed through the computer experiment.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.1048-1055
• /
• 2005

The formula to calculate a variation of optical path length of single crystal by the electric field was derived by this study. The formula was applied to $Bi_{12}SiO_{20}$ single crystal. The results are as follows. In case of the applied electric field in the body diagonal direction and the passing light along the same direction, the variation of optical path length had the largest value. The symmetry of the space distribution of optical path length satisfied $E3C_2\;8C_3$, the set of elements of the symmetry of $Bi_{12}SiO_{20}$ single crystal. The property which gave the largest influence to the variation of optical path length is the strain of length by the Inverse piezoelectric effect. The second influence, is the variation of the refractive index by the electro-optic effect. The variation of optical path length by the inverse piezoelectric effect and by the electro-optic effect have a reverse sign each other.

• 한국멀티미디어학회논문지
• /
• 제16권7호
• /
• pp.897-904
• /
• 2013

The recursive circulant network G(N,d) can be widely used in the design and implementation of parallel processing architectures. It consists of N identical nodes, each node is connected through bidirectional, point-to-point communication channels to different neighbors by jumping $d^i$, where $0{\leq}i{\leq}{\lceil}{\log}_dN{\rceil}$ - 1. In this paper, we investigate the routing of a message on $G(2^m,4)$, a special kind of RCN, that is key to the performance of this network. On $G(2^m,4)$ we would like to transmit k packets from a source node to k destination nodes simultaneously along paths on this network, the $i^{th}$ packet will be transmitted along the $i^{th}$ path, where $1{\leq}k{\leq}m-1$, $0{{\leq}}i{{\leq}}m-1$. In order for all packets to arrive at a destination node quickly and securely, we present an $O(m^4)$ routing algorithm on $G(2^m,4)$ for generating a set of one-to-many node-disjoint and nearly shortest paths, where each path is either shortest or nearly shortest and the total length of these paths is nearly minimum since the path is mainly determined by employing the Hungarian method.