• Spatial Information Research
• /
• v.10 no.1
• /
• pp.139-152
• /
• 2002

The purpose of this study is to estimate temporal soil loss change according to long-term land cover changes using G1S and RS. Revised USLE(Universal Soil Loss Equation) factors were prepared by using point rainfall data, DEM(Digital Elevation Model), soil map and land cover map. During the past two decades, land cover changes were traced by using Landsat MSS and TM data. As a result, forest area in 2000 has decreased 25.3 $km^2$ compared with that in 1990. Soil loss has decreased 3751.2 tou/yr. On the other hand, upland area has increased 22.5 $km^2$. Soil loss of upland has increased 5395.4 to/yr. Therefore, soil loss in 2000 increased 6.3 kg/$m^2$/yr compared with that in 1990. This was mainly caused by the increased upland area.

• Journal of Applied Reliability
• /
• v.17 no.2
• /
• pp.168-180
• /
• 2017

Purpose: In this research, we develop an effectiveness analysis simulation model using Agent Based Modeling with Communication Effects for the development of a new weapon system. Methods: To describe the future battlefield that has more complexity, we develop Agent Based Modeling to describe communication Effects. We use the communication theory (Path-Loss Model) and the real map. Results: We have compared simulation model with real map and simulation model without real map. The Blue Survival Ratio of simulation model with real map is worse than one without real map since the performance of communication gets lower. Conclusion: There are many studies about the effectiveness analysis of a weapon system. Most of previous researches assumed no communication error. In the real world, however, it's not appropriate assumption. Therefore, this study considers the communication error and shows that it is important factor in the effectiveness analysis.

• The Journal of Information Technology
• /
• v.4 no.3
• /
• pp.87-100
• /
• 2001

IETF has proposed integrated services model(Int-Serv) and differentiated service(Diff-Serv) to supply IP QoS in Internet[1][2]. Int-Serv model uses state information of each IP flow, so satisfies QoS according to traffic characteristics, but increases the amount of flow state information with increasing flow number. Diff-Serv uses PHP(Per Hop Behaviour) and there are well-defined classes to provide differentiated traffics with different services according to delay and loss sensitivity. Diff-Serv model can provide diverse services in Internet because of having no the state and signal information of each flow. As MPLS uses the packet forwarding technology based on label, it implements the forwarding engine of high performance easily. The MPLS can set up the path having different and variable bandwidth and assign each path to particular CoS (Class of Service). Therefore it is possible to support the Diff-Serv model of well- defined classes that can provide the differentiated traffic with different services according to delay and loss sensitivity in IP QoS models of IETF. In this paper we propose a scheme that can accommodate Diff-Serv model to provide QoS. The system performance has been estimated by scheduling plan according to traffic classes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.3
• /
• pp.300-310
• /
• 1999

A constant-volume combustion chamber is developed to measure the burnt gas temperature over the wide ranges of equivalence ratio from 1.5 to 2.7 and pressure from 0.1 to 2.7 and pressure from 0.1 to 6 MPa by two-color method. The combustion temperature is also calculated by the conventional two-region model. The premixed fuel rich propane-oxygen-inert gas mixtures under high pressures are simultaneously ignited by eight spark plugs located on the circumference of combustion chamber with 45 degree intervals. The eight converging flames compress the end gases to high pressures. The transmissiv-ity in the chamber center during the final stage of combustion at the highest pressure is measured by in situ laser extinction method. Comparisons are made with the combustion temperatures between two-color method and two-region model. It is found that the burnt gas temperature mea-sured by two-color method is higher than that calculated by two-region model because of being the negative temperature gradient on the calculation and the temperature distribution of light path-length on the measurement and the burnt gas temperature for the turbulent combustion is higher than that of the laminar combustion under the same conditions because the heat loss for turbulent combustion is lower due to the shorter combustion period.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1031-1040
• /
• 2023

Propagation characteristics in line-of-sight(LOS) paths in 3, 6, 10, and 17 GHz frequency bands were measured and analyzed in two different indoor corridors: second floors of Buildings D2 and E2. The measurement was designed to measure when the receiving antenna moved at 0.5 m intervals from 3 m to 30 m, while the transmission antenna was fixed. The analysis of the two indoor corridors was compared by applying basic transmission loss, root mean square (RMS) delay spread, and K-factor. For basic transmission loss, the loss coefficient of the floating intercept path loss model was higher in the indoor corridor of Building E2 than in that of Building D2. Similarly, the RMS delay spread in the time domain was greater in the indoor corridor of Building E2. However, the indoor corridor of Building D2 exhibited higher K-factor in the 3, 6, and 17 GHz bands with lower wave propagation in the 10 GHz band. Despite the 2 indoor corridors being identical, the propagation characteristics varied due to different internal structures and materials. The results provide measurement data for ITU-R Recommendations regarding various indoor environments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.51-58
• /
• 2010

According to dramatic increase of wireless communication demand, more spectrum resources are needed to support considerable and various wireless services, so cognitive radio(CR) was proposed to reuse unused frequency efficiently. Also, FCC revises its policies regarding the usage of the TV white spaces by unlicensed users. CR is an intelligent wireless communication system that is aware of the radio environment and is capable of adapting its operation to the statistical variations. Spectrum sensing is the key task of the CR systems. However, since spectrum sensing performance changes according to the received signal that is received various geography environment, regional characteristics are considered to estimate the path-loss. Therefore, for more accurate analysis and simulation, we demonstrate the spectrum sensing performance of CR system by various method applying Okumura-hata propagation model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.505-507
• /
• 2021

In a Wireless Sensor Network (WSN), the wireless data transmission environment plays an important role in system performance. In the proposed mobility model moving distance of sensor nodes has a great influences on communication performance. Transmission/receiving distance (d), path loss (L), sensitivity, Bit Error Rate (BER), Signal-to-Noise Ratio (SNR) are considerations when designing a wireless communication system. MANET is a form of network in which only wireless terminals communicate with each other independently and move without any assistance of an existing infrastructure network. This paper is research on the optimized power usage method which is study on the effect of the moving distance of mobile nodes on the overall energy efficiency of the system in WSN. The purpose of this study is to extend the life of the entire network by proposing the mobile distance of sensor nodes within the communication available range.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2913-2917
• /
• 2007

Turbocharger has been widely used in many passenger cars in application with diesel engines because of high power and fuel efficiency. However, flow-induced noise (whoosh or hissing noise) which is generated within the compressor during its operation at marginal surge line can deteriorate noise characteristics. Hissing noise excitation was associated with the generation of turbulence within the turbocharger compressor and radiated through the transmission path in turbocharger system. In this study, a sharp-edged reactive-type muffler was devised and installed in the transmission path to reduce the hissing noise. Acoustic and fluid dynamic characteristics for the muffler were investigated which is related to the unsteadiness of turbulence and pressure in turbocharger system. A transfer matrix method was used to analyze the transmission loss of the muffler. Simple expansion muffler with extended tube of the reactive type is proposed for the reduction of high frequency component noise. Turbulence computation was carried out by a standard ${\kappa}-{\varepsilon}$ model. An optimal design condition of the muffler was obtained by extensive acoustic and fluid dynamic analysis on the engine dynamometer with anechoic chamber. A significant reduction of the hissing noise was achieved at the optimal design of the muffler as compared with the conventional turbocharger system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.2
• /
• pp.79-84
• /
• 2009

Turbocharger has been widely used in many passenger cars in application with diesel engines because of high power and fuel efficiency. However, flow-induced noise (whoosh or hissing noise) which is generated within a compressor during its operation at marginal surge line can deteriorate noise characteristics. Hissing noise excitation is associated with the generation of turbulence within the turbocharger compressor and radiated through the transmission path in a turbocharger system. In this study, a expansion muffler with lids is devised and installed in the transmission path to reduce the hissing noise. Acoustic and fluid dynamic characteristics for the muffler are investigated which are related to the unsteadiness of turbulence and pressure in the turbocharger system. A transfer matrix method is used to analyze the transmission loss of the muffler. A simple expansion muffler with lids is proposed for the reduction of high frequency component noise. Turbulence simulation is carried out by a standard k - ${\varepsilon}$ model. An optimal design condition of the muffler is obtained by extensive acoustic and fluid dynamic analysis on the engine dynamometer with anechoic chamber. A significant reduction of the hissing noise is achieved at the optimal design of the muffler as compared with the conventional muffler.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.1954-1959
• /
• 2006

In this paper, we proposed TH UWB-IR medical image transmission system using the IEEE an. 802.15.4a specification in WPAN environment. Also, we analyzed reception performance of wireless medical image transmission system in indoor multi-path fading environment using ITU-R M.1225 channel model. As a results, the proposed scheme can solve the problem of interference from the medical equipment in same frequency band, and minimize the loss due to the indoor multi-path fading environment. Therefore, the transmission with low power usage is possible.