• 한국철도학회논문집
• /
• 제2권3호
• /
• pp.46-53
• /
• 1999

In this paper, made was a study on a mesh generation method based on the pollution error. This method is designed for the control of the pollution error in any patch of elements of interest. It is a well-known fact that the pollution error estimates are much more than the local one. When the pollution error is significant, nothing can be said about the reliability of any estimator based on local computations in the patch. Reliable a posteriori error estimation is possible by controlling the pollution error in the patch through proper design of the mesh outside the patch. This design is possible by equally distributing the pollution error indicators over the mesh outside the patch. The mesh generated from the conventional feedback pollution-adaptive mesh generation algorithm needs many iterations. Therefore, the solution time is significant. But the remeshing scheme in the proposed method was used here. It was shown that the pollution-adaptive mesh improves the E.I., simply denoted as Effectivity Index, on the patch of interest, and the pollution error reduces less than the local error.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.1025-1030
• /
• 1997

In this study,the procedure of interpolation surface modeling on bicubic spline patch equation and NC machining are presented. The procedure consists of three parts : patch modeling,cutter location data generation,post processing and NC milling machining. For generation of the cutter location data,tangent vectors and units normal vectors on the patch must be calculated. In order to investigate the properties of the interpolation surface created by bicubic spline patch, two kinds of end conditions, clamped end condition and relaxed end condition,were applied in this study. The shape of the patch depends on the magnitide of the tangent vectors and twist vectors at the corners of bicubic surface patch. the patch generated by relaxed end condition more approximated to the surface patch which was given.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.34-42
• /
• 2001

In this paper, we study on a modified mesh generation method based on the pollution error estimate. This method is designed for the control of the pollution error in any patch of elements of interest. It is a well-known fact that the pollution error estimates are much more than the local one. Reliable a posteriori error estimation is possible by controlling the pollution error in the patch through proper design of the mesh outside the patch. This design is possible by equally distributing the pollution error indicators over the mesh outside the patch. The conventional feedback pollution-adaptive mesh generation algorithm needs many iterations. Therefore, the solution time is significant. But we use the remeshing scheme in the proposed method. We will also show that the pollution error reduces less than the local error.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.647-652
• /
• 2000

Recently, according to the various taste of consumers, the design of a product is changed variously and complicatedly. The complicated product is not usually constructed with one patch but multi-patch. By the way, in machining, higher precision and the reduction of leading and machining time is required. But for the multi-patch sculptured surface, the amount of machining data becomes large. This means the increase of leading and machining time. In this study, the tool path generation method with reparameterization is proposed for multi-patch sculptured surface and variable step size using NURBS is used to satisfy the precision and to reduce leading and machining time.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.119-126
• /
• 2000

Recently, according to the various taste of consumers, the design of a product is changed variously and complicatedly. The complicated product is not usually constructed with one path but multi-path. By the way, in machining, higher precision and the reduction of leading and machining time is required. But, for the multi-patch sculptured surface, the amount of machining data becomes large. This means the increase of leading and machining time. In this study, the tool path generation method with reparameterization is proposed for multi-patch sculptured surface and variable step size using NURBS is used to satisfy the precision and to reduce leading and machining time.

• 한국융합학회논문지
• /
• 제9권6호
• /
• pp.45-52
• /
• 2018

본 논문은 단일 이미지에서 초해상도 영상 생성을 위해 저해상도 이미지에서 생성한 패치정보를 기반으로 선형보간하는 방법을 제안하였다. 기존의 초해상도 생성 방법인 전역 공간의 회귀 모델을 사용하면 특정 영역에 대해 참조할 정보가 부족하여 일반적으로 품질이 떨어지는 결과가 나타난다. 이러한 결과를 보완하기 위해 제안하는 방법은 초해상도 이미지 생성 과정에서 영상을 패치 단위로 지역을 분할하여 의미있는 정보를 수집하고, 수집된 정보를 기반으로 초해상도 이미지 생성을 위해 확장시킨 이미지 매트릭스 영역의 구성정보를 분석하여 선형 보간 과정을 거치고 패치정보를 대응시켜 탐색한 최적의 패치 정보를 기준으로 선형 보간하는 방법을 제안하였다. 실험을 위해 원본 이미지를 복원된 영상과 PSNR, SSIM으로 비교 평가하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.687-689
• /
• 2003

High resolution satellite images have huge amount of pixels in common. Thus, an efficient method is required for the generation of orthoimages. Patch backprojection method is a feasible way to improve the efficiency with respect to the point-by-point patch backprojection. We will propose an Adaptive Patch that optimizes the patch size for different terrain variations. The essence of the patch optimization is quadrate structuring for terrain variations. The area of interest is, thus, sequentially subdivided to four quadrate tiles until a preset criterion is met. The experiment results indicated that the proposed method is efficient without losing accuracy.

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.342-348
• /
• 2006

A new magnetostrictive patch array transducer for the generation and detection of torsional waves is developed fur the on-line health monitoring of rotating shafts. Even though the torsional wave is useful in nondestructive evaluation due to its non-dispersive property, a transducer generating torsional waves in rotating shafts has not been developed so far. In this research, a torsional wave transducer using the magnetostrictive effect is newly developed. By bonding an away of magnetostrictive rectangular patches on the outer surface of the shaft at an oblique angle of $45^{\circ}$ and encircling the array by a solenoid coil, we have successfully generated and measured torsional waves by the developed transducer. Several experiments were carried out to check the transducer performance.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.542-545
• /
• 2005

This paper is concerned wi th the generation of the Lamb waves in a non­ferromagnetic plate by a recently-developed orientation-adjustable patch-type magnetostrictive transducer (OPMT) and the dispersion analysis from the measured Lamb waves. OPMT is capable of adjusting wave-propagation orientation only with a single installation on a plate. The mechanics behind the wave generation and measurement by the magnetostrictive phenomenon, the working principle of OPMT is explained and the actual generation and measurement of the Lamb waves were conducted in a 3 mm-thick aluminum plate. For the accurate analysis of the dispersion characteristics of the measured Lamb waves, a modified version of the short-time Fourier transform, known as the dispersion-based short-time Fourier transform, was employed. The results presented in this work would serve as the underlying research for an advanced non-destructive evaluation based on ultrasonic waves.

• 한국측량학회지
• /
• 제28권1호
• /
• pp.83-92
• /
• 2010

고해상도 항공 디지털 사진기와 고밀도 3차원 데이터를 획득할 수 있는 항공 레이저 스캐너의 보급은 사진측량 및 공간정보 분야에 큰 발전을 가져왔다. 본 연구는 패치기반의 정사영상을 생생하여 폐색지역을 탐색하고 정사영상에서 발생하는 폐색지역을 복원하여 정밀정사영상을 생성하는 방법을 개발하는 것을 목적으로 한다. 정사영상에서 발생하는 폐색지역의 처리를 위하여 대상지역을 포함하고 있는 다중 영상들을 이용하여 상호 복원하는 방법을 개발하였다. 제시된 방법을 적용하면 폐색지역이 많이 발생하는 도심지역의 정밀정사영상을 효율적으로 생성할 수 있을 것으로 판단된다.