• Journal of the Korean Electrochemical Society
• /
• v.5 no.2
• /
• pp.62-67
• /
• 2002

The corrosion of the metallic cell components is blown to be one of the major reason f3r the performance degradation and subsequently the life-time limitation of the MCFC. To elucidate the corrosion phenomena, a corrosion study with the AISI-type 316L stainless steel, the most widely used separator material, in 621Li/38K carbonate eutectic melt was carried out. Corrosion phenomena in an MCFC were observed to differ from one location to another due to different environmental condition. The stability of passive film was found to be responsible fur the variations in corrosion phenomena. According to the potentiodynamic analysis, the passive film formed in anode-gas environment was less stable than in cathode-gas environment. The potentiostatic method combined with XRD analysis in addition to the cyclicvoltammetry was conducted to get an insight on variety corrosion reaction of AISI-type 316L stainless steel in a carbonate melt.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.161-171
• /
• 2021

This paper presents the findings of a comparative study on minimum weight design and sensitivity evaluation using different experimental design methods for the structural design of an active-type deck support frame (DSF) developed for the float-over installation of an of shore plant topside. The thickness sizing variables of the structural members of a passive-type DSF were considered the design factors, and the output responses were defined using the weight and strength performances. The design of the experimental methods applied in the comparative study of the minimum weight design and the sensitivity evaluation were the orthogonal array design, Box- Behnken design, and Latin hypercube design. A response surface method was generated for each design of the experiment to evaluate the approximation performance of the design space exploration according to the experimental design, and the accuracy characteristics of the approximation were reviewed. Regarding the minimum weight design, the design results, such as numerical costs and weight minimization, of the experimental design for the best design case, were evaluated. The Box- Behnken design method showed the optimum design results for the structural design of the passive-type DSF.

• Journal of the Korean Society of Costume
• /
• v.25
• /
• pp.233-247
• /
• 1995

The objectives of this study were to classify the contents of clothing involvement, to group elderly women into life style types. A method of this study was face to face re-search and questionnaire. Questionnaire was comprised of four sections : 18 Likert type items of clothing involvement measure ; 26 Likert type items of life style measure ; 3 items of clothing purchase measure ; and 3 demographic variables. Samples were 215 elderly women(60∼79 years of age) in Seoul, Korea. The data were analyzed using factor analy-sis, cluster analysis, one-way ANOVA, Dun-can's multiple range test,χ2 test. The results of the study were the follow-ings. 1. Four factors of clothing involvement derived by factor analysis : F.1 'clothing pleasure'; F.2 'clothing symbolism' ; F.3 'perceived risk in clothing purchase' ; F.4 'clothing interest'. 2. Four factors of life style derived by factor analysis : F.1 'active-leisure';F.2 'confidence oriented';F.3 'appearance interest';F.4 'house-work interest and community conciousness'. Three types of life style were defined by the cluster analysis of the 4 factors : T.1 'passive stag-nation'; T.3'outside activity'. 3. There were significant differences in clothing involvement factors according to life style types. Outside activity type perceived 'clothing pleasure' highest level among 3 life style types. Outside activity type and house-work and positive living type perceived 'cloth-ing symbolism' and 'clothing interest' higher level than did passive stagnation types. 4. Elderly women high in educational level were more distributed in outside activity type and the low in educational level in passive stagnation types. 5. There were significant relationships be-tween life style types and source of a clothing allowance, clothing purchase frequency, and a companion of dress store.

• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.22-29
• /
• 2010

Recent days, transition to ecological thought is being accelerating by environmental impact with a sustainable development. This symptom is no exception in architecture area. So is vernacular design affecting on modern architecture in many ways in terms of economical aspect and eco-friendly environment as well. Natural energy like solar power, environment, and terrestrial heat that applied in vernacular architecture is also widely accepted in name of 'sustainable energy' of which a design applied with ventilation and airing of natural wind is very useful & pragmatic in terms of economical reason. Accordingly, this study examined a relation between vernacular architecture and natural wind and compared it with traditional type and its feature of ventilation & airing. Ventilation & airing applied in the past can be divided into three categories: methods by convection, natural element, and architectural type. All these methods gave some pleasant felling indoors when there were no artificial energies. Even in modern age, such a ventilation & airing is being used with traditional type in different variety of materials, and it will be developed with modern technology without any extra cost in terms of sustainable expansion, and opened for further researches.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.988-993
• /
• 2004

This paper considers corrosion problems in the bolt connection of weathering steel box girder bridge using the external electric type corrosion resistance method which resisted to local corrosion in coated steel surface with contacted air. The weathering steel was created a rust itself in the passive state. but a coated box girder type was easily dew form could be made galvanic cell that accelerated corrosion. so that it was ruled by protection coat with some paint. Therefore, it needed that can be applied the external electric type corrosion resistance method in coated surface. As a result of the test of polarization amount had measured that the weathering steel was higher currents than the general steel by about $5\~10\%$. Therefore. an external electric type corrosion resistance method can be used to protect local corrosion in the coated bolt connection of weathering steel box girders effectively.

• Journal of the Korean Chemical Society
• /
• v.58 no.1
• /
• pp.9-16
• /
• 2014

In a borate buffer solution, the growth kinetics and the electronic properties of passive film on nickel were investigated, using the potentiodynamic method, chronoamperometry, and single- or multi-frequency electrochemical impedance spectroscopy. The oxide film formed during the passivation process of nickel has showed the electronic properties of p-type semiconductor, which follow from the Mott-Schottky equation. It was found out that the passive film ($Ni(OH)_2$) of Ni formed in the low electrode potential changes to NiO and NiO(OH) while the electrode potential increases.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.59-64
• /
• 2022

Vibration is one of the factors that degrades the performance of equipment and measurement equipment used in high-tech industries such as semiconductors and display. The vibration isolator is classified into passive type and active type. The passive vibration isolator has the weakness of insufficient vibration isolation performance in the low frequency band, so an active vibration control system that can overcome these problems is used recently. In this paper, PID controller is used to control the active vibration isolator. Methods for setting the gain of the PID controller include the Zeigler-Nichols method, the pole placement method. These methods have the disadvantage of requiring a lot of time or knowing the system model accurately. This paper proposes the gain auto tuning method of the active vibration isolator applied with the PSO algorithm, which is an optimization algorithm that is easy to implement and has stable convergence performance with low calculations. It is expected that it will be possible to improve vibration isolation performance and reduce the time required for gain tuning by applying the proposed PSO algorithm to the active vibration isolator.

• Journal of Ginseng Research
• /
• v.20 no.1
• /
• pp.7-14
• /
• 1996

This study was performed to examine the effect of red ginseng total saponin and extract on memory in mice using one trial step-down type passive avoidance method. Red ginseng total saponins (No. 1: PD/PT ratio=1.24, No. 2: PD/PT ratio=1.47) were prepared with the different mixing ratio by using the parts of red ginseng. In single administration of total saponin No. 1 (100 mg/ kg, bw) or No. 2 (50 mg/kg, bw) increased the latency time as compared with control group but was not statistically significant. Treatment of total saponin No. 1 (50 mg/kg, bw) for 10 days produced an increase of latency time but was not statistically significant. In scopolamine-induced memory deficient mice total saponin No. 1 (50 mg/kg, bw) and No. 2 (100 mg/kg, bw) significantly improved the latency time. These results show that red ginseng total saponin may improve the memory of sco-polamine-induced memory deficient mice and have nootropic activity.

• Korean Journal of Occupational Health Nursing
• /
• v.16 no.2
• /
• pp.109-118
• /
• 2007

Purpose: The purpose of this study was to identify stress and coping patterns of manufacturing male workers. Method: Data were collected from 215 manufacturing male workers and analyzed by SPSS WIN 12.0 Results: The total job stress score was 41.41 and the mean of the daily hassles score was 1.60. Related to the coping type, direct-active coping was the highest among four types of coping. Indirect-active coping was the second, followed by direct-passive coping and indirect-passive coping. Job stress score and daily hassles score were highly correlated by passive coping types. Conclusion: Occupational health management program including coping strategy is required to relieve workers' stress.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.151-165
• /
• 2019

In this study, the four types of improvement methods (increase self weight and reducing sliding force etc.) were proposed depending on install location with compaction grouting to improve seismic performance of existing port structure and optimal methods by analyzing the effects of improvement (stability, constructability and economy) by theoretical and numerical methods. From the dynamic time history analysis for artificial seismic waves, the results indicated that the horizontal displacement after improvement decreased compared to before improvement, however the displacement reduction effect among improvement methods was not significantly different. Slope stability based on the strength reduction method and the limit equilibrium analysis method, it is confirmed that the passive pile method is more safe than other methods. It is due to the shear strength at the failure surface is increased. In addition, the analysis of constructability and economy showed that the reduction of earth pressure method (type 02) and the passive pile method (type 03) are excellent. However, in the case of the passive pile method is concerned that there is a shortage of design cases and the efficiency can be reduced depend on various constraints such as ground conditions.