• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.226-239
• /
• 2018

In this paper, design and control method ZVT Interleaved Bidirectional LDC(IB-LDC) for mild-hybrid electric vehicle is proposed. The IB-LDC is composed of interleaved buck and boost converters employing an auxiliary inductor and auxiliary capacitors to achieve zero-voltage-transition. Operating principle of IB-LDC according to operation mode is introduced and mathematically analyzed in buck and boost mode. Moreover, PFM and phase control are proposed to reduce circulating current for low power range. Passive components design such as main inductor, auxiliary inductor and capacitors is suggested, considering ZVT condition and maximizing efficiency. Furthermore, a 600W prototype of ZVT IB-LDC for MHEVs is built and tested to verify validity.

• 한국항공우주학회지
• /
• 제37권5호
• /
• pp.450-456
• /
• 2009

수동형 진동제어 방식과 같이 시스템이 안정되며, 수동형에 비해 높은 제진 효과가 기대되는 반능동 진동제어 방식은 시스템의 안정화가 요구되는 우주구조물의 제진방법에 유효한 진동제어 방식중 하나이다. 본 논문에서는 유연우주트러스구조물의 진동제어를 위해 고안된 반능동 댐퍼내 작동유체의 질량을 모델링에 고려했을 경우의 제진특성을 분석하였고 댐퍼내 작동유체의 점성이 부족감쇠를 유지 할 경우, 작동유체 질량 적용에 따른 반능동 댐퍼의 제진효과를 확인하였으며 이를 토대로 반능동 댐퍼의 성능향상을 위한 설계방법을 제시하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권5호
• /
• pp.234-241
• /
• 2005

The performance of passive conductor loop (hereinafter 'loop') method which is used to mitigate the magnetic field around overhead power transmission line is dependent on its configuration and installed location, which are affected by installation conditions of the loops such as objective areas and levels of magnetic field mitigation. Thus, because the design problem of loops is difficult and cumbersome by variety of their configuration and complexity of magnetic coupling mechanism, it is need to be formulated as a computer-based optimum problem to determine the most effective and reasonable loop model satisfying the installation conditions. In this paper, the optimum locations of the multi-wired multiple loops including series reactance compensations are searched by using the genetic algorithm (GA) to mitigate effectively the magnetic fields of relatively near points or far points from transmission line at Am height, and the magnetic fields mitigation characteristics of each loop are analyzed in the view of magnitude, direction and phase of cancellation fields by polarized vector concept to identify their adequacy and rationality for the installation objectives.

• Human Ecology Research
• /
• 제54권5호
• /
• pp.529-539
• /
• 2016

This study confirmed shopping behavior of Korean young overseas tourists and its effect on travel evaluation. I first identified core factors of travel activity preference, travel shopping propensity, and shopping products. The effect of shopping product satisfaction on tour satisfaction and post-tour intention was then investigated. Based on travel activities, tourists were grouped, and their characteristics were compared. An online survey method was performed to obtain data of 20's-30's Korean unmarried people, while factor analysis, regression analysis, chi-square test, analysis of variance (ANOVA), and cluster analysis were applied to analyze data. The results were as follows. First, six travel activities (city life, art/shopping, cultural experience, entertainment, field experience, and friendship), three shopping propensity (novelty/uniqueness, utility, and prestige), and four product groups (fashion goods, household goods, crafts, and foods) were found by factor analyses. Second, travel activity tended to influence shopping propensity, which then influenced shopping products preference. All factors of travel activity seemed to affect the three travel shopping propensities. Third, shopping satisfaction was shown to affect tour satisfaction, and posttour behavior. Finally, four tourist groups (active, social, pleasure, and passive) differed in terms of preferred tour activities, shopping propensity, and tour behavior. Active tourists rated the highest scores and passive ones rated the lowest for most evaluations.

• 한국융합학회논문지
• /
• 제9권10호
• /
• pp.237-242
• /
• 2018

마이크로 믹서는 랩-온-어-칩이나 마이크로 유체 기기의 하나의 구성품으로 두 가지의 화학 물질을 혼합(융합)하는 장치이다. 본 연구는 다양한 형상의 패시브 마이크로 믹서의 성능을 평가하는 것을 목적으로 한다. 다양한 형상의 마이크로 믹서는 총 6가지의 형상을 비교하였고, 서로 동일한 수력 직경을 갖도록 3차원 모델링하였다. 내부 혼합 유동을 전산모사하기 위해여 상용 유동해석 프로그램인 ANSYS Fluent를 사용하였다. 수치해석 방법은 본 논문에 자세하게 기술하였다. 마이크로 믹서의 성능 평가는 혼합 지수와 압력 강하로 비교하였고, 결론적으로 CDM-8T은 합리적인 혼합성능과 상대적으로 낮은 압력 강하를 갖는 것으로 나타났다.

• 대한전자공학회논문지TE
• /
• 제42권4호
• /
• pp.1-6
• /
• 2005

최근 저항이나 캐패시터와 같은 수동소자를 PCB의 내층에 제조하는 임베디드 패시브 기술이 고성능의 IT 제품을 제조하는데 사용되고 있다. 그런데 임베디드 캐패시터는 정전용량 밀도가 낮아 회로소자로서의 전반적인 응용에 한계가 있다. 본 논문에서는 이러한 한계를 극복하기 위하여 wrinkle형의 전극과 유전체 층을 가진 새로운 임베디드 캐패시터를 제안하였다. FEM 기법을 사용하여 wrinkle형 임베디드 캐패시터의 정전용량 밀도를 평가하였다. Wrinkle형 임베디드 캐패시터는 기존의 평면형 임베디드 캐패시터에 비하여 25.6%$\sim$39.6% 정도 큰 정전용량 밀도를 나타내었다. 특히, thin film형 임베디드 캐패시터에 wrinkle 구조를 적용할 때 정전용량 밀도가 보다 많이 향상되었다.

• 한국군사과학기술학회지
• /
• 제10권4호
• /
• pp.81-87
• /
• 2007

In this study, analysis of structural design criteria for the canopy actuating device has been conducted considering the aerodynamic breakaway capabilities of jettisonable canopy system. Unsteady aerodynamic loads for the opened canopy configuration at passively controlled jettision mode were computed using CFD method. The general purpose multi-body finite element code, SAMCEF Mecano, is used in the implemented analyses for the passive jettision condition. The recommended altitude and speed of aircraft was suggested as design criteria of aerodynamic breakaway capability of jettisonable canopy system as a bakup egress method when normal canopy jettison sequence malfunctioned. Aerodynamic breakaway condition of jettisonable canopy was also simulated and the fracture load conditions of canopy actuator were investigated.

• 한국생산제조학회지
• /
• 제25권6호
• /
• pp.517-521
• /
• 2016

General industrial robots are difficult to use for precision assembly because they are operated based on position control. Their position accuracy is also usually higher than the assembly clearance (several tens of ${\mu}m$). In previous researches, force control was suggested as a robotic assembly solution. However, this method is difficult to apply in reality because of speed and cost problems. The RCC provides high speed, but applications are limited because the compliance is fixed, and it cannot detect an assembly condition during a task. A variable passive compliance device (VPCD) was developed herein. The VPCD can detect the assembly condition during tasks. This device can provide proper compliance for successful assembly tasks. The pneumatic system and the Stewart platform with an LVDT sensor were applied for measuring the displacement and variable compliance, respectively. The concept design and analysis were conducted to prove the effectiveness of the developed VPCD.

• 한국광학회지
• /
• 제16권3호
• /
• pp.254-260
• /
• 2005

높은 재현성과 함께 효율적인 수동 정렬을 위하여 제안된 대형코어 단일모드 폴리머 광도파로를 이용하여 제작 가능한 폴리머 광도파로 소자인 가변 광감쇠기를 제안하고 삼차원 빔전파 방법을 이용하여 소자의 동작 특성을 파악하고 최적 구조를 설계하였다. 소자의 표면에 집적된 박막 전극 히터에서 발생하는 열로 인해 폴리머 광도파로에서 발생하는 굴절률 분포 변화를 수치해석적으로 구하였으며 이 결과를 이용하여 삼차원 빔전파 해석을 수행하였다. 대형코어 광도파로가 가지는 작은 굴절률 대비로 인해 효과적인 광감쇠 현상을 작은 온도 변화로부터 얻을 수 있음을 확인하였다. 일반 광도파로 VOA에서 섭씨 150도 이상의 온도 변화가 필요한 반면 대형 코아 광도파로 VOA는 섭씨 70도 정도의 온도 변화 만으로도 20 dB 이상의 감쇠를 얻을 수 있었다. 대형코아 광도파로가 가지는 장점인 높은 정렬오차 허용범위와 더불어 낮은 구동전압으로 동작하는 장점을 함께 가지는 가변 광감쇠기 설계를 완성하였다.

• 한국태양에너지학회 논문집
• /
• 제40권2호
• /
• pp.25-36
• /
• 2020

The Korean government has a plan to mandate zero-energy buildings in 2020 for public and 2025 for private buildings. In order to design a zero-energy building, insulation and airtightness, which are the most basic elements of passive house technology, are required, and the government has been accomplished this through step-by-step strengthening of related standards. In passive house with high thermal insulation and airtightness performance, the heat introduced into the building through solar radiation can be stored for a long time to keep the inside warm during winter. On the other hand, during summer, heat introduced into the building cannot be easily released to outside, so it is necessary to actively block solar radiation and high temperature outdoor air to prevent an increase of indoor temperature. Therefore, this study aims to derive an appropriate operation condition of passive house to maintain the indoor temperature at an suitable level according to the ventilation methods and solar shading conditions. As a result, under the conditions that the outdoor temperature was 28℃ or less, the ventilation using a heat recovery ventilation system at daytime and natural ventilation at nighttime were selected for the most appropriate operation method. In addition, in the case of solar shading, it was found that blocking solar radiation at daytime using the blind and open the blind at nighttime to ensure natural ventilation were selected for the most appropriate solar shading condition.